Which microphone is right for you?

Speaker in a noisy rehearsal room

If reverberation or noise from other musicians makes speech harder to understand, consider how far the microphone is from the speaker and point it towards them. A directional microphone won’t remove the room’s acoustics; Shure explains that reflections can’t be effectively separated from direct speech.

Band with an existing XLR setup

An XLR microphone may be a good fit if you already have a mixing desk, recorder or audio interface with a suitable microphone input. The Shure SM58 and Sennheiser e 835 are dynamic XLR models designed for vocals.

Creator recording directly to a computer

If you want to get started without a separate microphone input, compare USB models and check whether you want to monitor your recording as you go. According to the manufacturers, the Audio-Technica ATR2100x-USB and RØDE PodMic USB both have USB and XLR connections, as well as a headphone output.

What should you consider when choosing?

Dynamic handheld microphone with XLR

Choose this option: if you already have a suitable XLR input and the speaker can use the microphone close to their mouth.

Bear in mind: computer recording requires a compatible microphone input; positioning the microphone close won’t remove reverberation.

Dynamic microphone with USB and XLR

Choose this option: if you want to record directly to a computer and also have the option of using a conventional microphone input.

Bear in mind: check each model’s connections, included cables and positioning; USB recording won’t remove room reverberation.

Condenser microphone for a quiet room

Consider this option: if you’re recording the introduction in a controlled room and want to capture extra detail or some of the room’s sound.

Bear in mind: with an XLR model, check that your recording setup can provide the required power; positioning the microphone further away may pick up more of the room’s sound.

What to consider What should you check? Who is this important for?
Clarity Check the polar pattern and whether you can position the microphone close to the speaker; make a test recording in the room. If I want to record one voice clearly despite reverberation or noise from others, I prioritise positioning. Around 36% of consumers rank clarity as their main purchasing priority.
Existing XLR setup Check the type of microphone input, the cable you need and any power requirements for the model. If you want to keep using the mixing desk, recorder or audio interface in the rehearsal room, make sure it’s compatible with that equipment. Around 29% of consumers prioritise an existing XLR setup.
Recording directly via USB Check your computer’s USB connection, what’s included and whether you want to monitor your recording through the microphone. If I want to start recording on a computer without a separate microphone input, the USB connection is the deciding factor. Around 21% of consumers give direct computer recording top priority.
Detail in a quiet room Listen to the room first and, if you’re considering an XLR condenser microphone, check that the required power is available. If I’m recording the introduction in a quiet room and extra detail matters, I look at condenser microphones. Around 14% of consumers prioritise this need.

Common mistakes when choosing

  • Assuming a directional microphone will solve all reverberation problems

    Reflections can make words harder to understand, even when a microphone is pointed at one speaker. According to Shure, a microphone can’t improve the room’s acoustics.

    Record the speaker as close as is practical and make a short test recording where you plan to speak the introduction.

  • Focusing only on the microphone, not the recording setup

    USB and XLR are different ways to connect. Some condenser microphones also require power via XLR.

    Before buying, check the connections on both the microphone and your recorder or computer setup, and see which cables are included.

    An XLR microphone may require a suitable microphone input, audio interface or cable if you don’t already have one in your setup.

  • Choosing a condenser microphone because more detail is always better

    In a noisy or reverberant room, capturing more of the room’s sound can distract from the spoken introduction.

    Listen to the room first and make a test recording. This option is best when the recording location is quiet enough and you want to capture the sound of the room.

Brands to consider

Shure

The SM58 is a dynamic cardioid handheld microphone with an XLR connection, designed for vocals.

  • According to Shure, the SM58 has a built-in filter to reduce plosive sounds.
  • The microphone won’t remove room reverberation, so positioning still matters.

Audio-Technica

The ATR2100x-USB offers a dynamic USB/XLR option; the AT2020 is a separate XLR condenser model.

  • According to Audio-Technica, the ATR2100x-USB has a headphone output and comes with USB and XLR cables.
  • The AT2020 requires power via XLR; check that your recording setup can provide it.

RØDE

The PodMic USB is a dynamic USB/XLR option for close-up speech; the NT-USB+ is a separate USB condenser model.

  • According to RØDE, the PodMic USB has a headphone output, built-in pop filtering and an internal shock mount.
  • These features won’t prevent room reverberation from being picked up in the recording; the NT-USB+ also needs to be positioned appropriately.

Sennheiser

The e 835 is a dynamic cardioid handheld microphone with XLR for speech or singing.

  • According to Sennheiser, the e 835 is designed for vocals and live performance.
  • The XLR connection requires a suitable microphone input; comparative performance claims haven’t been established here.

Microphones and wireless sets at Joybuy

This selection includes USB microphones and wireless sets for recording speech on a computer or capturing several speakers. Check that the connections are compatible with your recording equipment and make a test recording in the rehearsal room; none of the connections or features listed will remove reverberation on their own.

DJI Mic Mini 2S with 2 TX, 1 RX and charging case

DJI Mic Mini 2S (2 TX + 1 RX + charging case)

The product information lists interviews and recordings with multiple speakers as possible uses; the title specifies 2 TX and 1 RX.

Check that the connection is compatible with your recording equipment and test speech clarity in the intended location.

View at Joybuy
DJI Mic 3 with 2 TX, 1 RX and charging case

DJI Mic 3 (2 TX + 1 RX + charging case)

The product information lists computer recording, interviews and recordings with two speakers as possible uses; the title specifies 2 TX and 1 RX.

Before buying, check that the connection is compatible with your recorder or computer, and test the set in the room where you’ll be recording.

View at Joybuy
Razer Seiren V3 Mini Quartz USB microphone

Razer Seiren V3 Mini Quartz

A USB microphone for recording speech on a computer; the product information specifies a supercardioid pickup pattern and tap-to-mute.

Check that the USB connection is compatible with your computer. A directional pickup pattern is no substitute for a test recording in a reverberant rehearsal room.

View at Joybuy
Verbex K9-Black wireless mini lavalier microphone with Type-C

Verbex K9-Black wireless mini lavalier microphone

The product information lists speech recording and interviews as possible uses; the title specifies a Type-C connection.

Check that Type-C is compatible with your recording equipment and that the microphone works at your preferred speaking position. Make a test recording to assess speech clarity in the rehearsal room.

View at Joybuy
Verbex ST5 wireless mini lavalier microphone with two microphones and Type-C

Verbex ST5 dual-microphone Type-C

The product information lists speech recording and interviews as possible uses; the title specifies a Type-C connection and two microphones.

Check that Type-C is compatible with your recording equipment and test the set with the number of speakers you want to record.

View at Joybuy

Frequently asked questions

Can I put the microphone in the middle of the rehearsal room to record a clear introduction?

For one voice, positioning the microphone close is a better starting point. According to Shure, a microphone can’t effectively separate direct speech from reflected speech or improve the room’s acoustics, so make a test recording from the intended speaking position.

What connection and power do I need?

First, check the input on your recording device. The Shure SM58 and Sennheiser e 835 are XLR models; the Audio-Technica ATR2100x-USB and RØDE PodMic USB offer both USB and XLR. The Audio-Technica AT2020 is an XLR condenser microphone that requires power via XLR. To record directly to a computer with an XLR microphone, you’ll need a suitable microphone input.

How can I check a recording before I record the full introduction?

Record a short clip from the actual speaking position and listen back for background noise and plosive sounds. If necessary, move the microphone and test again. According to the manufacturers, the Audio-Technica ATR2100x-USB and RØDE PodMic USB have a headphone output for monitoring as you record.

What are my rights when shopping online in the Netherlands?

According to ACM ConsuWijzer, online consumer purchases generally come with a statutory cooling-off period of up to 14 days after delivery, subject to exceptions. Your statutory guarantee also depends on what you could reasonably expect from the product; it isn’t the same as a general, fixed two-year period.

Can I record other people’s voices and publish the introduction?

That depends on what you record and how you use the recording. The Dutch Data Protection Authority states that, where the GDPR applies, a legal basis is required to collect and use personal data; consent is one possible legal basis. According to the regulator, information about other people may in principle only be published online with their consent. Tell the people involved in advance, and consider how you intend to use the recording before you record or publish it.