Who is this suitable for?

Teacher in a noisy classroom

Wants to capture one played instrument more clearly than conversation and reverberation, and can position the microphone close to it.

Percussion group leader

Wants to hear the balance between several instruments and can spend time setting up and positioning a stereo pair.

Teacher who wants to record quickly

Wants to start recording a lesson with as little separate equipment as possible, while bearing in mind how important the positioning of built-in stereo microphones is.

What should you look for?

Recording one instrument directly

A good fit when: you want one drum or other instrument to stand out and can position the microphone close to it.

The trade-off: pointing the microphone at the instrument from close range can make it stand out more against background noise, but it won’t automatically capture the group in balance. Shure explains this positioning principle in its drum recording guide.

Separate condenser microphone(s)

A good fit when: you want to use a microphone as an overhead, or record a group with a stereo pair.

The trade-off: check for phantom power and the number of suitable XLR inputs. Two microphones also need extra care when positioning them.

Recorder with built-in stereo microphones

A good fit when: you want to get started with one device and its built-in X/Y pair, with the option to add external microphones later.

The trade-off: the built-in microphones also pick up sound from the direction and space in which you place the recorder. A recording format can’t compensate for poor positioning.

What to consider What should you check? Who is this important for?
Reducing classroom noise Can you safely position the microphone close to the instrument, and are its polar pattern and connection suitable for that setup? If I want one instrument to be audible above conversation and reverberation, that’s my priority. Around 33% of consumers say capturing an individual instrument is their main purchasing need.
Group balance Do you need two microphones and recording channels, or will a recorder with a built-in stereo pair do? Listen to a test recording in mono as well. If I want to capture the sound of several instruments together, I focus on balance and positioning. Around 25% of consumers say group balance is their main purchasing need.
A practical recording setup Check the recorder or interface, number of inputs, any phantom power requirements, cables, storage and power supply. If I want to record quickly during a lesson, I want to know in advance which components I’ll need to connect. Around 25% of consumers give a simple recording setup top priority.
Loud strikes Compare maximum sound pressure levels only when they’re measured on the same basis; a recording format doesn’t guarantee that the microphone capsule can handle every level. If I want to record loud strikes from close up, I check both the microphone specifications and the rest of the recording setup. Around 17% of consumers prioritise handling loud strikes.

Common pitfalls

  • Assuming a separate microphone is a complete recording system

    A separate condenser microphone needs a suitable input and, depending on the model, phantom power. Without suitable recording equipment, you can’t use it as a complete recording setup.

    Before buying, check which connections and power options your recorder or interface provides, and which components you already have.

  • Assuming one NT5 is the same as a matched pair

    RØDE also offers the NT5 as a certified pair for stereo recording; a version with one microphone isn’t the same package.

    Check the full version name and what’s included in the offer before ordering.

  • Confusing 32-bit float recording with protection against all distortion

    The specified SPL limit of the built-in microphones is separate from the recording format. 32-bit float recording doesn’t increase the microphones’ SPL limit.

    Check the SPL specification and make a test recording from the intended position when recording loud strikes.

  • Moving a group microphone further away and further away

    Increasing the distance changes the balance of instruments, reflections and classroom noise picked up by the microphone.

    Make test recordings from several suitable positions and choose deliberately between a focused sound from one instrument and the sound of the group as a whole.

Brands to consider

Shure

The SM57 is a dynamic cardioid microphone designed for focused recording of an individual instrument.

  • Shure lists drum recording as one use for the SM57. According to Shure’s positioning advice, aiming it at the source from close range can improve the balance between the sound source and background noise.
  • This doesn’t mean that one SM57 will automatically capture an entire percussion group in balance.

Audio-Technica

The PRO37 is a small-diaphragm condenser microphone that the manufacturer positions for uses including overhead recording.

  • The Dutch product specifications list a cardioid pattern, an XLR connection and 11–52 V DC phantom power.
  • Check that your recording equipment provides the required power and connection.

RØDE

The NT5 is a small-diaphragm condenser microphone that the manufacturer also recommends for drum overheads.

  • The manufacturer also offers the NT5 as a certified matched pair for stereo recording.
  • The NT5 requires P48 phantom power. Check whether the version includes one microphone or the full pair.

Zoom

The H4essential combines a recorder with built-in X/Y microphones and connections for expansion.

  • Zoom specifies two XLR/TRS inputs, 32-bit float recording and a maximum sound pressure level of 130 dB SPL for the built-in microphones.
  • These specifications are no substitute for positioning the recorder carefully.

Products at Joybuy

Related products will be available soon.

Frequently asked questions

Can I use one microphone for an entire percussion group?

Yes, if a simple group recording is enough; one microphone can pick up several sound sources. For more control over the balance and stereo image, positioning and possibly additional recording channels are important.

Do I need phantom power for a condenser microphone?

The Audio-Technica PRO37 is specified for 11–52 V DC phantom power, while the RØDE NT5 requires P48. Check whether your recorder or interface supplies the required power through the XLR channels you want to use.

How should I start positioning and looking after a microphone?

Start with a short test recording from the intended position, then move the microphone if the instrument and room don’t sound balanced. Shure recommends judging the desired sound acoustically and through positioning; the SM57 manual says to clean the device using a dry cloth only.

What should I check besides the microphone before buying?

Check whether you already have the recorder or interface, cables, stand, storage and any phantom power you need. Also check carefully which components are included in the version on offer.

Can a school record a percussion lesson if people’s voices are recognisable?

According to the Dutch Data Protection Authority, a sound recording on which someone can be identified is personal data. If the school processes this data, GDPR rules apply; among other things, the school must have an appropriate legal basis and inform pupils and parents. Consent is one possible legal basis, but it isn’t automatically required for every lesson recording. The right assessment depends on the purpose and use of the recording.