Who is this for?

Voice actor in a room with audible background noise

You record character voices while traffic, ventilation or other household sounds may be picked up. Start by considering where you’ll record and how close you can position the microphone.

Voice actor with a wide range of vocal levels

You switch between whispers and shouts, and want to listen for changes in volume and plosive sounds during test recordings.

Beginner with a single computer

You want to record directly to a computer, so you’re looking at the connection, controls and whether you can monitor the recording as you go.

What should you look for when choosing?

First consider your room and recording distance. Then decide whether you want to record directly over USB or use an XLR set-up with an interface. If your vocal levels vary, test both your quietest and loudest passages too.

What to consider What to look for Who should pay particular attention?
Room noise Compare microphone type, recording distance and polar pattern; listen for room reflections too. I record in a room where traffic or ventilation may be audible, and want to find out how the space affects my voice first. Around 33% of consumers give room noise top priority.
Varying vocal levels Make test recordings of both quiet and loud takes, and check the gain, monitoring and pop filter. I play characters with big changes in volume and want to check that every take comes through clearly. Around 25% of consumers put vocal dynamics and plosive sounds first.
Connecting and monitoring Check the USB type, your computer’s connection and whether you can monitor while recording. I’m starting with one computer and want to record and listen back without a separate interface. Around 25% of consumers make a straightforward set-up their top priority.
Expandability Check whether the model offers USB, XLR or both. For XLR, also look at the interface, cable and any power requirements. I want the option to expand my recording set-up with XLR later, so I’m looking beyond the microphone itself. Around 17% of consumers choose expandability as their top priority.

Pitfalls to avoid

  • Confusing a polar pattern or noise processing with sound insulation

    A microphone can’t silence a room. Shure also recommends paying attention to acoustics; claims about noise processing don’t prove that audible room noise will disappear.

    Make a short test recording from the spot you plan to use, and listen to the quieter passages too. Adjust the microphone position or the room if needed.

    You may need to spend extra time improving your recording space and trying out different microphone positions.

  • Comparing only the microphone and forgetting about the XLR set-up

    An XLR microphone needs suitable recording equipment. For the AKG P120, AKG specifies a supply voltage of 44–52 V.

    Check which interface, cable, mount and power supply, if any, your chosen model needs, and see what’s included with the microphone.

    An XLR set-up may require extra equipment and connection steps. For USB, the equipment you need depends on the model and your computer.

  • Assuming 32-bit float will always handle loud takes

    RØDE lists this capability for the digital signal path of the NT1 5th Generation. On its own, this says nothing about plosive sounds or whether your recording space is suitable.

    Check which recording path you’re using and make a test recording of your loudest character.

Brands to compare

Shure

The MV7+ is a dynamic microphone for speech, with USB-C and XLR connections.

  • The model has a headphone output and adjustable recording features.
  • Shure describes Voice Isolation and noise reduction as product features, but they don’t automatically remove the need to make acoustic adjustments. Also check that the mount suits your set-up.

RØDE

The NT1 5th Generation is a cardioid condenser microphone with USB and XLR connections.

  • According to RØDE, the kit includes a pop filter, shock mount, and USB-C and XLR cables.
  • The stated 32-bit float capability applies to this model’s digital signal path; don’t assume it’s a feature of all RØDE microphones.

Audio-Technica

The AT2020USB-X is a USB-C condenser microphone for recording directly to a computer.

  • According to Audio-Technica, this model offers direct headphone monitoring and a mix control.
  • The manufacturer lists a shock mount as an optional accessory. Check whether you need an XLR connection before choosing this model.

Sennheiser

The Profile USB is a cardioid USB-C condenser microphone that Sennheiser also recommends for voice-over recording.

  • Sennheiser lists gain, mix and headphone volume controls, as well as a desk stand included in the box.
  • The version described is designed for desktop use; check that it suits how you move and the space you have.

AKG

The P120 is an XLR condenser microphone that AKG specifies for uses including speech and home recording.

  • AKG lists a cardioid pattern, a switchable low-cut filter and an attenuator.
  • AKG specifies a supply voltage of 44–52 V. You’ll need suitable equipment as well as this microphone to record directly to a computer.

Joybuy products

These Joybuy products are wireless microphones and USB microphones for voice recording. Check that the connection and receiver are compatible with your computer and home studio.

DJI Mic Mini 2S with 2 TX, 1 RX and charging case

DJI Mic Mini 2S (2 TX + 1 RX + Charging Case)

A wireless microphone system; the model name lists 2 transmitters, 1 receiver and a charging case. Check that the receiver is compatible with your recording equipment.

View at Joybuy
SYNCO P2XT USB-C wireless microphone

SYNCO P2XT USB-C Wireless Microphone

A wireless microphone with USB-C. Check that the connection and receiver included are compatible with your recording device.

View at Joybuy
USB condenser microphone with cardioid pattern

USB cardioid condenser microphone

A USB condenser microphone for anyone looking for a mic to record voices. Check the connection, the type of set-up you want and which accessories you’ll need.

View at Joybuy
DJI Mic 3 with 1 TX and 1 RX

DJI Mic 3 (1 TX + 1 RX)

A wireless microphone system with 1 transmitter and 1 receiver, according to the model name. Check that the receiver connects to the device you want to record with.

View at Joybuy
DJI Mic 3 with 2 TX, 1 RX and charging case

DJI Mic 3 (2 TX + 1 RX + Charging Case)

A wireless microphone system; the model name lists 2 transmitters, 1 receiver and a charging case. Check that the receiver is compatible with your recording equipment.

View at Joybuy

Frequently asked questions

How can you reduce plosive sounds without making your voice sound dull?

Place a pop filter between your mouth and the microphone, and try angling the microphone slightly. RØDE recommends experimenting with a distance of 6–10 cm for most of its microphones; don’t treat this as a fixed distance for every brand or voice.

Do XLR microphones all need the same power supply?

No. Check the power specifications for the exact model and the connection on your interface. AKG specifies a supply voltage of 44–52 V for the P120; a USB microphone uses a different connection method.

What consumer rights apply to online purchases in the Netherlands?

When you buy online as a consumer from a business, you generally have a 14-day cooling-off period. If a product is faulty, you can contact the seller; the Dutch government says there is no fixed statutory guarantee period in the Netherlands. Different rules may apply to business purchases.

Where can you take an old electric microphone?

For household electrical equipment, the Dutch government describes options including using collection points or your local authority, and the take-back scheme when buying a similar appliance. Different conditions apply to businesses.