Which setup is right for you?

Creator recording several actors

If you’re recording voices at the same time and want to adjust them separately afterwards, count the microphone inputs and check that your recorder can record separate tracks. Zoom lists four XLR microphone inputs for the PodTrak P4.

Creator recording in a noisy room

When there’s reverberation or background noise, direction and positioning matter. Shure describes the SM58’s cardioid pattern as focusing on the main sound source, but that doesn’t make a microphone soundproof.

Solo creator looking to expand

If you record roles one at a time, USB can be a convenient way to get started, while XLR can connect to an interface later on. RØDE lists both connections for the PodMic USB and NT1 5th Generation.

What should you look for when choosing?

Start by asking whether the actors will speak at the same time and whether you want to edit their voices separately afterwards. Then choose a microphone type and connection to suit your room and recording equipment.

Separate dynamic XLR microphones

Best for: actors speaking at the same time when you want to record or adjust their voices separately.

Bear in mind: each microphone needs a suitable input, and you’ll usually also need a cable and stand.

Cardioid condenser microphone

Best for: recording detailed vocals separately in a sufficiently quiet room.

Bear in mind: make a test recording in your own room; the Audio-Technica AT2020 requires 48 V phantom power.

USB/XLR microphone for solo work

Best for: recording roles one at a time, starting with a direct USB connection and possibly using XLR later.

Bear in mind: one microphone won’t automatically create separate tracks for actors speaking at the same time.

One microphone for a group

Best for: scenes that call for a shared group sound, with no need to edit each voice separately afterwards.

Bear in mind: an omnidirectional microphone won’t automatically prioritise one speaker; test how clear and balanced the voices sound.

What to consider What to check before buying Who should pay most attention?
Separate voices Count the voices recording at once, microphone inputs and tracks that can be recorded separately. If I record actors at the same time, I want to be able to adjust their voices separately afterwards; around 36% of consumers put separate voices first.
Room sound Test the microphone in the room you plan to use and check whether the actor can speak close to it. In my room, I want clear dialogue without expecting a microphone to eliminate reverberation; around 29% of consumers prioritise managing room sound.
Vocal detail and connection Check the exact microphone type and connection required; the AT2020 specifically requires 48 V phantom power. When I record roles separately, I want detailed vocals and a suitable recording setup; around 21% of consumers put vocal detail first.
Easy to get started Check USB compatibility with your equipment and whether the exact model also has XLR. I want to get started easily with USB and be able to expand later; around 14% of consumers give an easy start top priority.

Common mistakes

  • Assuming one group microphone gives you the same editing flexibility as separate voice tracks

    A microphone used for a group records a shared sound, but won’t automatically give you separate volume levels for each voice.

    Decide in advance how many actors will speak at once and whether you want to edit their voices separately later. For separate recordings, check how many inputs and tracks you’ll need.

    A setup with separate voice tracks may need extra microphones, cables, stands and a recorder or interface with enough inputs.

  • Assuming all XLR microphones are equally easy to connect

    Power and preamp requirements vary between models. The AT2020 requires 48 V phantom power; for voice-over recording with the SM7B, Shure recommends at least 60 dB of preamp gain. These requirements apply to specific models.

    Check the requirements for the exact model and what your interface can do. Audio-Technica notes that the AT2020 reviewed here doesn’t come with an XLR cable or stand.

    You may need a suitable interface or power supply. For the AT2020, also check whether you already have an XLR cable and stand.

  • Confusing a directional microphone with soundproofing

    A microphone’s pickup pattern affects the directions from which it picks up sound, but the microphone’s position and distance still affect the balance between the voice and background noise.

    Make a test recording in your own room using the planned speaking distance and microphone position.

Brands to consider

Shure

The SM58 reviewed here is a cardioid dynamic microphone; the SM7B is a separate, studio-focused dynamic model designed for close-mic recording.

  • Shure lists a built-in pop filter for the SM58 and recommends positioning it close to the sound source.
  • For voice-over recording with the SM7B, Shure recommends at least 60 dB of preamp gain; this isn’t a general requirement for Shure microphones.

RØDE

The PodMic USB reviewed here is dynamic, while the NT1 5th Generation is a condenser microphone. Both models have USB and XLR connections.

  • RØDE lists a built-in pop filter and headphone output for the PodMic USB. The manufacturer specifies a self-noise level of 4 dBA for the NT1 5th Generation.
  • These are product specifications and manufacturer descriptions, not an independent comparison of recording quality in a home studio.

Audio-Technica

The AT2020 reviewed here is a cardioid XLR condenser microphone for a fixed recording position.

  • Audio-Technica lists vocal recording as one of the uses for this model.
  • The AT2020 requires 48 V phantom power; Audio-Technica notes that an XLR cable and stand aren’t included. This applies to the XLR version reviewed here.

Sennheiser

The e 835 is a cardioid dynamic vocal microphone you could consider for close-mic recording.

  • Sennheiser describes the e 835 primarily as a microphone for lead and backing vocals on stage.
  • The manufacturer also mentions use when moving off-axis; this doesn’t prove a performance advantage over studio microphones.

Joybuy products

This selection includes compact microphone systems for recording several speakers and a USB microphone for a desk setup. Check that each model’s connections and recording features suit the way you record and edit.

DJI Mic Mini 2S with 2 TX, 1 RX and charging case

DJI Mic Mini 2S (2 TX + 1 RX + Charging Case)

The set with two transmitters could suit scenes where several actors speak at once. Check in advance that its recording and connection options fit your editing plans.

The product name lists 2 TX, 1 RX and a Charging Case.

View at Joybuy
DJI Mic 3 with 2 TX, 1 RX and charging case

DJI Mic 3 (2 TX + 1 RX + Charging Case)

The set with two transmitters could suit recordings with two speakers. Check that it works for the type of recording and voice editing you want to do.

The product name lists 2 TX, 1 RX and a Charging Case.

View at Joybuy
Razer SEIRĒN V3 MINI Quartz USB microphone with Tap-to-Mute

Razer SEIRĒN V3 MINI Quartz USB Microphone with Tap-to-Mute

This USB microphone could suit a solo voice recording at a desk. Check that the connection and recording settings work with your computer.

The product name lists USB and Tap-to-Mute.

View at Joybuy

Frequently asked questions

Can I record several actors at once with one microphone?

You can if you deliberately want to capture one shared sound. If you want to edit the voices separately afterwards, plan for one microphone and one separately recordable input per voice recording at the same time, and test for bleed between microphones.

Do I need phantom power for an XLR microphone?

Not for every XLR model. The Audio-Technica AT2020 reviewed here specifically requires 48 V phantom power. Check the requirements for the exact model and whether your interface can provide that power to the input you need.

What else do I need besides the microphone, and what if it stops working?

For each setup, check whether you need an interface or recorder, XLR cables, stands and monitoring equipment. Audio-Technica notes that the AT2020 reviewed here doesn’t come with an XLR cable or stand. According to the Dutch government, the Netherlands has no fixed statutory guarantee period; if a product is faulty, the seller must provide a solution.

Can I publish an audio drama using someone else’s text or music, or recognisable voices?

This depends, among other things, on the rights to the material and how you publish it. The Dutch government states that permission is generally needed to use copyright-protected text and music; a private copy for personal use must not be shared or made public. According to the Dutch Data Protection Authority, recognisable audio recordings may contain personal data. The exception for exclusively personal or household use does not automatically apply to public or professional publication.