Who is this guide for?

Demo recorder dealing with audible room reverb

You record in an untreated room and want to influence the balance between direct sound and room tone by using focused, close microphone placement. Shure recommends close-miking an instrument in a room with poor acoustics.

Acoustic instrumentalist

You want to record an acoustic instrument and can try different microphone positions and recording distances. AKG lists acoustic guitars and other string instruments as suitable applications for the P170.

Singer-songwriter with a simple computer setup

You want to record straight to a computer or use an XLR recording chain later. Audio-Technica describes the ATR2100x-USB as having USB and XLR connections; RØDE lists both connection options for the NT1 5th Generation.

What should you look for?

What to consider What should you check? Who should consider this?
Room reflections and unwanted noise Listen to test recordings at different distances and angles; check the polar pattern of the exact model. If you’re recording in an untreated room, take reflections and background noise into account without expecting a microphone to silence the room. Around 40% of consumers say reducing room sound is their top priority.
The sound of your acoustic instrument Record from several positions and decide whether you want to record the instrument on its own or at the same time as vocals. If your instrument’s sound is the priority, you’ll want to compare different positions and consider what the microphone picks up from the room too. Around 30% of consumers put instrument sound first.
Connection and monitoring Check USB or XLR, the required power, computer compatibility and how you want to monitor your recording. If you want to get started on a computer without a separate interface, a suitable USB connection is useful. For XLR, your recording equipment needs to be compatible with the microphone. Around 20% of consumers say a simple connection is their top priority.
Recording vocals and instrument on separate tracks Decide whether you want to record both sources separately at the same time and check how many simultaneous inputs you’ll need. If you want to edit vocals and instrument separately later, your recording setup needs to capture both sources independently. Around 10% of consumers list separate tracks as their main requirement.

Common pitfalls

  • Expecting a directional microphone to eliminate room reverb

    A microphone’s polar pattern and distance from the source affect what it picks up, but they won’t treat the room’s acoustics.

    Make test recordings from different positions and listen back before choosing a microphone type.

  • Focusing only on the microphone and forgetting the rest of the recording chain

    USB, XLR and power requirements vary by model; an XLR setup needs a compatible recording input.

    Check the connections and any power requirements for the exact version, and make sure they work with the equipment you already have.

  • Choosing an instrument condenser without considering the room

    A microphone’s suitability for acoustic instruments doesn’t tell you how it will sound in your untreated room.

    Assess the instrument and reflections together in a test recording, and don’t assume you’re guaranteed a better result.

Brands and models for reference

Shure

The SM57 is a cardioid dynamic XLR microphone for focused instrument or vocal recording.

  • Shure lists instruments and vocals as suitable applications for the SM57.
  • The model information doesn’t prove that the SM57 will sound better than a condenser microphone in every untreated room; positioning still matters.

Audio-Technica

The ATR2100x-USB is a dynamic microphone with USB and XLR connections; the AT2020 is a separate XLR condenser microphone.

  • Audio-Technica lists two outputs and direct monitoring for the ATR2100x-USB.
  • Don’t confuse the ATR2100x-USB with the AT2020: the AT2020 uses XLR and, according to Audio-Technica, requires power via XLR. These are specifications, not a listening comparison.

RØDE

The NT1 5th Generation is a cardioid condenser microphone for vocals, guitar and more, with USB and XLR connections.

  • RØDE lists both connection options and the recording accessories included.
  • The connections won’t change the room’s acoustics; assess the recording with the microphone in the position you intend to use.

AKG

The P170 is a small-diaphragm condenser microphone for acoustic guitar and other string instruments, among other applications.

  • AKG specifies a cardioid polar pattern and an XLR connection.
  • AKG lists a power range of 44–52 V; check that your recording equipment can supply this power, and assess the room sound with your chosen microphone position.

Joybuy products

The Joybuy products below are USB microphones for computer setups. Use test recordings to check whether the positioning and sound suit an acoustic demo in your room.

HyperX SoloCast 2 USB gaming microphone, black

HyperX SoloCast 2, USB Gaming Microphone, Black

Could suit you if you want to record straight to a computer via USB; make a test recording to assess the positioning in your room.

USB microphone with a cardioid polar pattern.

Joybuy
Razer Seiren V3 Mini Quartz compact USB microphone

Razer Seiren V3 Mini Quartz

Could suit you if you’re looking for a compact microphone with a USB connection; listen back to check whether the recording distance works for your acoustic demo.

Compact USB microphone with tap-to-mute control.

Joybuy

Frequently asked questions

Where should I start with positioning if my acoustic instrument is picking up too much room sound?

Try different distances and positions, then listen back to your recordings. Shure recommends recording an instrument closer to the microphone or isolating it further in a room with poor acoustics; there’s no universally correct position.

Do I need an audio interface for every microphone?

No: a microphone with a suitable USB output can connect directly to a compatible computer. For analogue XLR recording on a computer, you’ll need a compatible recording input or interface; if you’re using a condenser microphone, check its power requirements too.

What should I check if I want to record vocals and guitar simultaneously on separate tracks?

Check that your setup has enough simultaneous inputs for the sources you’ve chosen. Shure gives an interface with two inputs as an example for recording two separate tracks; that doesn’t mean every USB microphone supports the same setup.

What are my rights if a microphone I bought online isn’t suitable or is faulty?

For distance purchases from a business, the Dutch government says you’re usually entitled to a 14-day cooling-off period; check the applicable terms and exceptions. Faulty products are covered by the legal guarantee. According to the Dutch government, the Netherlands has no fixed statutory guarantee period; if your claim is valid, the seller must provide a solution.