Who is this guide for?

Recording in a reverberant booth

You want the direct sound of your voice or instrument to stand out over reflections and background noise, and you can position the microphone close to the source. Shure emphasises that microphone placement depends on the source and the recording environment.

Acoustic instrumentalist

You want to capture gentle playing and tonal nuances, and can adjust the microphone position using test recordings.

Singer-songwriter

You want to decide whether one combined demo recording will be enough, or whether you’ll need to be able to edit the vocals and instrument separately later.

What should you look for when buying?

Start by listening to a test recording in the booth. Then choose a connection and recording setup that suit your source and equipment, and consider whether you need one track or several separate tracks.

Factor to consider What should you check? Who is this important for?
Sound in the booth Make a test recording and compare distance, direction and audible reflections. If reflections are audible in my small booth, I want to hear first whether the direct sound of my voice or instrument comes through clearly enough. This is a priority for around 31% of consumers.
Instrument detail Compare short takes from different positions and listen for attack, bass and room sound. I want to assess the gentle playing and nuances of my acoustic instrument before choosing a microphone. Around 25% of consumers prioritise instrument detail.
Connection Check whether it’s USB or XLR, how many inputs are available, whether phantom power is needed, and which cables you’ll need. If I want to record easily on a computer, I want to know in advance which connection and equipment my recording chain requires. For around 25% of consumers, a simple connection is the deciding priority.
Separate tracks Decide whether one combined demo track will be enough; if not, check whether two inputs are available for simultaneous recording. When I sing and play at the same time, I want to be able to adjust the vocals and instrument separately later if one mixed track isn’t enough. Around 19% of consumers prioritise having separate control.

Things to watch out for when buying

  • Assuming a small booth has been acoustically treated

    A small room can still produce audible reflections. The balance between direct sound and room sound also depends on the microphone’s position.

    Make short test recordings from different distances and directions, then listen back using the same voice or instrument.

    Comparing positions can take extra time, as you’ll need to make test recordings and reposition the microphone.

  • Treating an XLR microphone like a USB microphone

    According to Audio-Technica, the Audio-Technica AT2020 has an XLR connection and requires 48 V phantom power.

    Check the full model name, available XLR inputs, power supply and which accessories are included with that version.

    You may need a suitable recording chain and possibly an interface or cable, so check what you already have.

  • Expecting one microphone to record two separate tracks

    With one microphone, vocals and instrument can end up together in a single recording. This won’t automatically give you separately adjustable tracks.

    Decide in advance whether one combined demo track will be enough. If you want to edit the sources separately, check whether you can use two microphone inputs at the same time.

    A second microphone, an extra input and a cable will make your recording setup more involved.

  • Assuming a pair of microphones is a complete recording solution

    Two microphones don’t replace the recorder or interface, cables and any suitable power supply required by your recording chain.

    Check what’s included in the box and what other equipment you’ll need for your intended setup.

    Using two microphones may require extra inputs, cables and a suitable power supply.

Brands to consider

Shure

The SM57 is a dynamic cardioid XLR instrument microphone worth considering if you want to record close to the source and focus on it.

  • Shure describes the SM57 as suitable for recording instruments and isolating the main source.
  • This doesn’t prove it will record better in every booth. Assess the microphone placement and your complete XLR recording chain with a test recording.

RØDE

According to RØDE, the NT1 5th Generation is a cardioid condenser microphone with USB and XLR connections, designed for vocals and instruments, among other uses.

  • The two connection options may be useful if you want to record directly to a computer or use an XLR interface.
  • A condenser microphone may also pick up unwanted sounds in the room. Check how it performs in your booth, and make sure you’re looking at the NT1 5th Generation.

sE Electronics

The sE7 is a small cardioid condenser microphone for focused recordings of acoustic instruments.

  • The sE Electronics manual lists a switchable 80 Hz low-cut filter and a 20 dB pad.
  • These features are no substitute for good microphone placement. Also check whether you’re buying one microphone or a pair.

Audio-Technica

The AT2020 is an XLR condenser microphone for recording vocals or instruments.

  • Audio-Technica specifies a cardioid polar pattern.
  • The XLR version requires 48 V phantom power, so check that your recording equipment can provide it.

AKG

AKG positions the cardioid XLR condenser microphone P120 for home recording of vocals and instruments.

  • AKG lists a switchable pad and low-cut filter.
  • The stated performance is based on manufacturer information, not a test in your booth. Check the connections and power supply required by your recording chain.

Joybuy products

These Joybuy picks are aimed at recording vocals or multiple sound sources on a computer. Check that the connection and recording setup suit your acoustic demo.

DJI Mic 3 with two transmitters, one receiver and charging case

DJI Mic 3 - 2 TX + 1 RX + Charging Case

May suit computer recording with two transmitters; the product information mentions recording with two people and compatibility with computers.

The product name lists two transmitters, one receiver and a charging case.

View on Joybuy
Razer Seiren V3 Mini Quartz compact USB microphone

Razer Seiren V3 Mini Quartz

May suit a vocal demo recorded on a computer if a compact USB microphone works with your recording setup. Check that the connection is suitable for your equipment.

The product name mentions USB and a compact design.

View on Joybuy

Frequently asked questions

Where should I start when positioning the microphone?

Make short recordings from different distances and directions, then listen back. Shure emphasises that there’s no single ideal position for every source; if the room sound is distracting, try positioning the microphone closer to the instrument.

Can I connect an XLR condenser microphone directly to my computer?

Check the connection and power requirements of the exact model. According to Audio-Technica, the XLR version of the AT2020 requires 48 V phantom power; according to RØDE, the NT1 5th Generation also has a USB connection for use with a computer.

Do I need two microphones if I’m singing and playing at the same time?

Not if one combined demo track is enough. If you want to adjust the vocals and instrument separately later, check whether you can use two microphones and two simultaneous inputs. Shure describes a setup with one microphone for vocals and one for acoustic guitar.

What return and warranty rights apply to an online purchase in the Netherlands?

According to the Dutch government, for eligible distance purchases from a business, you’ll usually have 14 days to change your mind. The Netherlands has no fixed statutory warranty period; if a product is faulty, contact the seller. Check the terms that apply to your purchase.

Can I share a demo publicly if it includes someone else’s music?

Don’t assume you can publish music just because you made the recording yourself. According to the Dutch government, you need permission from the creator to use someone else’s copyrighted music; a private copy for personal use must not be distributed or made public.