Musician in a noisy rehearsal room
You want to record one instrument clearly without other sound sources and the room overpowering the demo. Careful positioning and a test recording will help you judge what is actually being captured.
Choose a microphone based on what you want to capture: a single instrument with less unwanted room noise, vocals and an instrument, or a group playing together. Then consider the polar pattern, connection and power requirements. Even with the right microphone, placement and the acoustics of the rehearsal room still matter.
You want to record one instrument clearly without other sound sources and the room overpowering the demo. Careful positioning and a test recording will help you judge what is actually being captured.
You want to record vocals and an acoustic instrument, and decide how much detail and room ambience you want.
You want to preserve the balance between players or capture a stereo image, so you also need to consider the number of microphones, recording channels and the sound of the room.
Start with the recording you want to make: a focused close-mic recording of one instrument, a recording of vocals and an instrument, or the group playing together with the room sound included. Compare positions with a test recording before choosing a microphone based on type alone.
A good fit when: you want to record one instrument up close and keep other sound sources out of the recording as much as possible.
Trade-off: a close-mic recording won’t automatically capture the sound of the whole group or room.
A good fit when: the individual sound of an acoustic instrument is your priority and you can position the microphone carefully.
Trade-off: check the power and recording channel requirements. A stereo pair needs more setup and may also capture more of the room.
A good fit when: you’re recording vocals and an instrument separately or one after the other, and having a choice of connection matters.
Trade-off: with XLR, check the power and recording chain. A different connection won’t improve the room acoustics.
A good fit when: you deliberately want to record the group playing together and the room; Shure recommends an omnidirectional pattern for recording from the centre in all directions.
Trade-off: this approach isn’t designed to isolate one instrument from unwanted room sound.
| What to consider | What to look for | Who should pay extra attention? |
|---|---|---|
| Unwanted noise and room acoustics | Listen to a test recording from different positions; check the polar pattern and distance from the instrument. | If I want to record one instrument clearly in a noisy rehearsal room, I focus on careful positioning. Around 31% of consumers say unwanted noise and room sound are their main concern when buying. |
| The sound of vocals or an instrument | Decide which sound source takes priority and compare recordings from different positions. | If you mainly want to capture the sound of vocals or an acoustic instrument, consider whether one microphone will give you the balance you want. Around 31% of consumers prioritise this sound goal. |
| Connection and recording chain | Check the exact model, whether it uses USB or XLR, the power required and the number of recording channels available. | If I first want to know whether the microphone will connect to my existing equipment, I also check what else I need to make the recording. Around 23% of consumers say a working recording chain is their main concern when buying. |
| Group balance and stereo | Decide whether you want a single room microphone, one focused microphone or a stereo pair; if using two microphones, check the number of inputs. | If you want to preserve the group’s performance or a stereo image, the setup and available channels are part of the decision. Around 15% of consumers say group balance or stereo is their main concern when buying. |
Your microphone choice and its position affect how much of the instrument and the room you hear. A microphone won’t automatically make the acoustics of your rehearsal room neutral.
First, make test recordings from different positions and listen back to decide how much room sound you want to keep.
Allow time to adjust the position and compare recordings.
According to Audio-Technica, the standard Audio-Technica AT2020 doesn’t have USB. The AKG P170 has a specified power requirement, while the RØDE NT1 5th Generation has both USB and XLR.
Before buying, check the full model number, connection, power requirements and what’s included in the box.
Depending on the microphone and your existing equipment, you may need suitable recording equipment and cables.
The RØDE M5 is sold as a pair and can be used for stereo, but stereo isn’t automatically necessary for a single sound source.
First decide whether you want a stereo image or simply want to be able to position one sound source easily.
A pair means an extra microphone, more setup and possibly a second recording channel.
The SM57 is a focused dynamic microphone for recording a single sound source up close.
The P170 is a small-diaphragm XLR condenser microphone that AKG recommends for uses including acoustic guitar.
The M5 is designed for use as one or two small-diaphragm microphones; the NT1 5th Generation is a large-diaphragm option with USB and XLR.
The AT2020 is a cardioid XLR condenser microphone for a recording chain with a suitable power supply.
The LCT 240 PRO is a cardioid XLR condenser microphone for vocals and acoustic instruments.
Yes, if you deliberately want to capture sound from all directions; Shure recommends an omnidirectional pattern for this. This is different from a focused recording of one instrument, so make a test recording first to see whether the room sound suits your goal.
Try different distances and positions, then listen back to your recordings. For poor acoustics or unwanted noise, Shure recommends moving the microphone closer to the instrument or isolating the sound source further. The right position varies depending on the instrument and room.
It depends on the model and connection. AKG specifies 44–52 V for the XLR P170 and RØDE specifies P24/P48 for the XLR M5. According to RØDE, the NT1 5th Generation can also connect directly to a computer via USB. Check the power supply, input and included accessories for the exact version.
No. According to Audio-Technica, the standard AT2020 has an XLR connection and no USB. Check the full model number and make sure your recording equipment has a suitable input and power supply.