Who is mesh Wi-Fi suitable for?

A family with two workspaces in use at the same time

You want to study and work in different places without activity in one area disrupting the connection in the other. Careful placement or a wired connection between the mesh nodes may influence your choice; Tweakers discusses wired backhaul as a stable way to connect nodes.

A family without Ethernet between rooms

You want wireless access in the study nook and need to work out how many nodes you need and where to place them so they maintain a strong enough connection with each other.

A family that wants to manage network access

As well as coverage, you want to manage guest access or parental controls. The features available may depend on the system, its settings and its operating mode.

What should you look for when choosing?

First decide how the mesh nodes will connect to each other, then consider coverage, available features and compatibility with your existing equipment.

What to consider What to look for when buying Who is this most important for?
Coverage in both areas Map out your router, floors, walls and workspaces. Check how many nodes are included and where you can place them. If I need a usable connection in the study nook too, I want to know where the nodes can go and how they’ll connect to each other. Around 36% of consumers prioritise coverage in both areas.
Using both workspaces at the same time Check whether Ethernet backhaul is supported and whether you’ll have a spare port for a work computer after connecting the nodes. When studying and working at the same time, I mainly want a suitable connection between the nodes and enough ports. Around 29% of consumers prioritise a stable connection for simultaneous use.
Family management Check which guest access and parental control features are available, whether a subscription is required and what changes in access point mode. If I want to manage access for family members or guests, I want to know in advance which features will work in my setup. Around 21% of consumers prioritise family management as their main requirement.
Existing equipment Write down the full model names of your router and current mesh nodes. Check which combinations and operating modes are supported. If you want to keep using your current router or mesh nodes, you’ll want to avoid buying a new set that isn’t compatible with them. Around 14% of consumers prioritise keeping their existing setup.

Buying pitfalls

  • Assuming the stated speed or coverage area reflects performance in your home

    A maximum speed or coverage claim doesn’t automatically tell you how good the connection will be in both workspaces. Tweakers also emphasises the importance of the connection between the mesh nodes.

    First choose between wired and wireless backhaul, then consider where you can place the nodes in your home.

  • Expecting the same features in access point mode

    According to TP-Link, the main router manages the clients in this mode. Some Deco features, including parental controls and port forwarding, aren’t available.

    Before buying, decide whether you want to keep your existing router and check which features work in your chosen operating mode.

  • Assuming a different pack size or mesh generation is an identical upgrade

    The number of nodes can vary between packs. Google also states that Nest Wifi Pro can’t be used in the same mesh network as older Nest Wifi or Google Wifi nodes.

    Compare the full model name and pack size, and check compatibility with your current equipment.

  • Assuming advanced parental controls are always included

    TP-Link states that some advanced HomeShield features, including time limits and enhanced filtering, require a subscription.

    Check which features are available with the specific model and what terms apply.

Brands to consider

TP-Link

TP-Link describes the Deco X50 as a dual-band Wi-Fi 6 system with three gigabit ports per node and support for Ethernet backhaul.

  • The stated ports may be useful if you want to connect a work computer using a cable.
  • According to TP-Link, Deco parental controls and port forwarding, among other features, aren’t available in access point mode. Some HomeShield features require a subscription.

ASUS

ASUS describes the ZenWiFi BD4 as a dual-band Wi-Fi 7 system with wired backhaul and two 2.5-gigabit ports per node.

  • The ports may be useful if you want to connect equipment with ports that support speeds above gigabit.
  • Check how many nodes are included in the full version. ASUS speed and coverage figures are manufacturer claims, not a guarantee of performance in your workspaces.

FRITZ!

FRITZ! offers the Mesh Set 1700 as a 3-pack. FRITZ! lists Wi-Fi 7, guest access and parental controls among its features.

  • This set is worth considering if you’re looking for three nodes and management features.
  • According to FRITZ!, the individual Repeater 1700 has one gigabit LAN port. Check the connections if you need both wired backhaul and a work computer in the same location.

KPN

According to KPN, SuperWifi 2 is a Wi-Fi point for extending a KPN setup, managed through MijnKPN.

  • Worth considering if you want to extend your KPN network.
  • Check your modem and subscription. KPN says SuperWifi 1 doesn’t work with the KPN Box 14, which is required for its 4 Gbit/s offer. This doesn’t mean SuperWifi 2 will form a mesh network with every router.

Google

Google describes Nest Wifi Pro as a Wi-Fi 6E mesh system that supports Ethernet backhaul and can be expanded with extra Nest Wifi Pro routers.

  • Worth looking into if you already use Google Home.
  • According to Google, older Nest Wifi and Google Wifi nodes can’t be used in the same mesh network as Nest Wifi Pro.

Mesh Wi-Fi products at Joybuy

These Joybuy products are mesh systems designed to connect multiple areas of your home. For the version on offer, also check for the correct CE marking: the Dutch Authority for Digital Infrastructure (RDI) describes this as a mark for equipment that meets the applicable requirements.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68, 2-pack

If you want to connect the nodes with a cable, check that the ports and cable route will work with your setup.

The product name indicates a set with two nodes.

View at Joybuy
ASUS ZenWiFi BT8 mesh system, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8, 2-pack, tri-band Wi-Fi 7

If you’re looking for a two-node system with tri-band Wi-Fi, check that it suits your layout and the connection between your workspaces.

The product name lists 2.4 GHz, 5 GHz and 6 GHz.

View at Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7 mesh system

ASUS ZenWiFi BD4, dual-band Wi-Fi 7

If you’re considering a ZenWiFi mesh system with Wi-Fi 7, check that the number of nodes and ports on this version suit your workspaces.

The product name lists 2.4 GHz and 5 GHz.

View at Joybuy
TP-Link Deco AX1800 mesh system, 2-pack, Wi-Fi 6

TP-Link Deco AX1800, 2-pack, Wi-Fi 6

If you’re looking for a mesh system with two nodes, check that you can place them where you need them and decide how you want to connect them.

The product name lists a 2-pack and Wi-Fi 6.

View at Joybuy
TP-Link Deco M4 mesh system, 3-pack, dual-band Wi-Fi 5

TP-Link Deco M4, 3-pack, dual-band Wi-Fi 5

If you want to connect several areas, compare the number of nodes with your home’s layout and check where they’ll be able to reach each other.

The product name lists a 3-pack, 2.4 GHz and 5 GHz.

View at Joybuy

Frequently asked questions

How do you set it up alongside an existing router?

First decide whether you want to use the mesh system as a router or as an access point. TP-Link recommends setting up Deco as a router in the app first, then switching to access point mode. Your existing main router will continue to handle tasks such as DHCP, and some Deco features won’t be available.

Can you connect a computer in the shared workspace to a mesh node with a cable?

It depends on the ports on the node you choose and how the mesh system is connected. TP-Link says you can use a Deco port for a computer, but the main unit also needs to connect to the modem or router. Check how many ports will be left in your setup.

Do you have to keep paying for parental controls?

It depends on the feature. TP-Link states that some advanced HomeShield features, including time limits and enhanced filtering, require a subscription. Check which features are available with the version you choose and whether they work in your preferred operating mode.

What are your rights when buying online in the Netherlands?

For a standard online purchase, you generally have a statutory 14-day cancellation period from delivery; different rules may apply to exceptions. The statutory guarantee isn’t automatically limited to two years either. According to the Netherlands Authority for Consumers and Markets (ACM) Consumer Information, the expected lifespan depends on factors including the product.

What should you look for in a mesh router for the Dutch market?

Check the CE marking on the specific version. The Dutch Authority for Digital Infrastructure (RDI) describes it as a mark for equipment that meets the applicable European requirements; a product listing alone doesn’t confirm that every version meets those requirements.