Who should consider this?

Workshop participant at the end of a weak-signal hallway

Your workshop space gets noticeably weaker Wi-Fi than the area around your router. Finding a suitable midway position for an extra point matters more than relying on the advertised maximum coverage. The Consumentenbond recommends placing Wi-Fi extenders where you want to improve the signal, while eero advises against putting a mesh point in a dead zone.

Participant with video or audio dropouts

Before buying extra equipment, you want to find out whether the dropouts occur in your workshop space, between mesh points or at the internet connection itself. VodafoneZiggo reported in May 2025 that 51% of the home workers surveyed sometimes experience video-calling problems; this figure isn’t specific to mesh Wi-Fi or this workshop setup.

Homeowner with a difficult connection between rooms

You may be able to use existing network cables or consider another way to connect your mesh points if walls or floors are interfering with the wireless connection. TP-Link describes both Ethernet backhaul and powerline for Deco models; the right option depends on what’s available in your home.

What should you look for?

Your choice mainly depends on where the signal drops out and which connection between the points is practical for you.

Wireless mesh through the hallway

Choose this if: you have a safe spot out of the way where the extra point can still receive a good connection from the first point.

Bear in mind: a point placed in the dead zone itself may not receive a strong enough signal. Advertised coverage doesn’t tell you how well it will work in your home.

Ethernet backhaul

Choose this if: you have a usable network cable running to the other end of the hallway or to your workshop space.

Bear in mind: the cable, ports and connections need to suit your network setup.

Powerline backhaul

Choose this if: you don’t have Ethernet, a wireless connection seems tricky and suitable power sockets are available.

Bear in mind: the advertised powerline speed isn’t a measurement of performance in your home. Test the connection where you plan to use the points.

Keep your existing router

Choose this if: repositioning your existing equipment solves the weak spot, or a wired test also suffers from dropouts.

Bear in mind: this may not solve an identified Wi-Fi dead zone.

What to consider What to look for when buying Who is this most important for?
Coverage in the workshop space Check whether there’s a suitable place for an extra point, away from the narrow walkway. If I need coverage at the end of the hallway, I want to find a spot where the extra point can still receive a signal. Around 36% of consumers say getting usable coverage in their workshop space is their main concern.
Reliable video and audio Where possible, compare the Wi-Fi in your workshop space with a wired test; mesh won’t automatically fix problems beyond your local Wi-Fi. If my video or audio keeps dropping out, I want to find out whether the Wi-Fi in my space is the cause. Around 29% of consumers prioritise avoiding interruptions to their workshop.
Connection between mesh points Check whether Ethernet is available. Consider powerline only if a wireless connection is difficult, and test the setup at home. If walls or distance make it difficult to connect rooms, I want to know which option will work in my home. Around 21% of consumers say a working connection between mesh points is their top priority.
Total cost and features Consider whether you need that many points, and check whether the extra features you want require a subscription. If I want to avoid unnecessary equipment or features, I want to check first whether repositioning what I already have will be enough. Around 14% of consumers say keeping purchase and running costs down is their main concern.

Common buying mistakes

  • Putting an extra point in the dead zone

    A wireless mesh point still needs to communicate with another point. If it’s placed where there’s no usable signal, it won’t be able to pass on a good connection either.

    First, find a safe midway spot where the point can still receive a signal. Then test the connection in your workshop space.

  • Treating advertised Mbps or square metres as a guarantee

    Advertised speeds and manufacturer coverage claims don’t show how well the connection will work in your hallway or workshop space.

    Check the connection where you need it, and compare the backhaul options before focusing mainly on wireless speeds.

  • Relying only on the powerline speed

    The quoted powerline speed isn’t a measurement of the connection through your home’s electrical wiring.

    Consider this option mainly if wireless backhaul is weak and you don’t have Ethernet. Test the setup in the places where you’ll actually use it.

  • Confusing basic features with paid extras

    TP-Link says that certain HomeShield features require paid subscriptions, which renew automatically until cancelled.

    Before buying, check which features you need and review the current subscription terms for the Netherlands.

Brands to compare

TP-Link

The Deco X50 and Deco PX50 are different mesh models. The X50 offers a wireless setup with optional Ethernet backhaul, while the PX50 uses powerline.

  • TP-Link lists three gigabit ports per point for the Deco X50 and G.hn powerline for the Deco PX50.
  • Advertised speeds and coverage aren’t a measurement of performance in your hallway. Check the product version, pack size and any paid HomeShield features.

ASUS

The ZenWiFi XT9 is a tri-band Wi-Fi 6 model to consider if you’re looking at a wireless connection between points and more advanced settings.

  • ASUS lists separate 2.4GHz and two 5GHz radios for the XT9.
  • The advertised radio speeds aren’t workshop speeds. ASUS says 160MHz availability may vary by region.

eero

eero describes the eero 6+ as an app-focused Wi-Fi 6 alternative and offers advice on where to place wireless mesh points.

  • eero describes both wireless placement and Ethernet backhaul.
  • According to eero, Beacon and eero 6 Extender devices don’t have an Ethernet port, so check the exact model.

NETGEAR

The Orbi range offers multi-band mesh options to compare if the wireless connection between points is a key consideration.

  • NETGEAR describes the Orbi 870 expansion satellite as using tri-band technology with enhanced backhaul.
  • This is a NETGEAR claim about that product range; it doesn’t prove how an Orbi setup will perform in your hallway or work with any router.

Joybuy product picks

Joybuy product picks for mesh Wi-Fi across multiple rooms.

TP-Link Deco BE68, 2-pack

TP-Link Deco BE68 (2-pack)

For anyone looking to use mesh points in several rooms and considering wired backhaul.

Joybuy
ASUS ZenWiFi BT8, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack)

For anyone looking for a mesh setup across several rooms and multiple Wi-Fi frequency bands.

2-pack; tri-band (2.4 GHz/5 GHz/6 GHz); Wi-Fi 7 (802.11be).

Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

For anyone looking for mesh Wi-Fi across several rooms and wanting to use Ethernet backhaul if there’s a suitable cable.

2-pack; Wi-Fi 6.

Joybuy
TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack)

For anyone considering a three-point mesh setup and wanting to use optional Ethernet backhaul if there’s a suitable cable.

3-pack; dual-band (2.4 GHz/5 GHz); Wi-Fi 6 (802.11ax).

Joybuy
ASUS ZenWiFi BT10, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT10 (2-pack)

For anyone looking for a mesh setup across several rooms and multiple Wi-Fi frequency bands.

2-pack; tri-band (2.4 GHz/5 GHz/6 GHz); Wi-Fi 7 (802.11be).

Joybuy

Frequently asked questions

Where should you put an extra wireless mesh point if your hallway is narrow?

Place it somewhere stable and out of the way, where it can still communicate well with the first point—not right in the dead zone. Then test the connection in your workshop space. This placement advice from eero isn’t a fixed distance rule for every home.

Which backhaul should you use if the connection between rooms is weak?

If you have a usable network cable, you could consider Ethernet backhaul. Without a cable, powerline may be an option to test at home. The right choice depends on the connections available and the conditions in your home. The advertised powerline speed isn’t a measurement of your setup.

Will mesh help if your workshop connection still drops out despite good Wi-Fi coverage?

Not necessarily. Mesh can improve a weak local Wi-Fi connection, but it won’t automatically fix a problem beyond that connection. Where possible, compare the connection in your workshop space with a wired test, and check whether other devices or locations are affected too.

Do you need to replace your provider’s modem to use your own mesh Wi-Fi?

Not necessarily. ACM ConsuWijzer explains that you’re free to choose your router, but your provider’s technical requirements and settings still matter. Check whether the mesh system can work behind your existing modem or in a suitable access point mode.

What should you look for in CE marking for Wi-Fi mesh in the Netherlands?

Check the CE marking on the actual device and make sure the product version is the one you intend to buy. The Rijksinspectie Digitale Infrastructuur states that equipment placed on the market in Europe must meet the applicable requirements and carry a CE marking. A mention on a sales page doesn’t verify the device itself.