Who is mesh Wi-Fi relevant for?

Workshop attendee with a weak signal

Your workspace is outside the good coverage area of your existing Wi-Fi. The Consumentenbond recommends placing Wi-Fi nodes where they can still receive a good signal themselves.

Users of a shared workspace

You make video calls at the same time or use several devices. So compare the connection between the Wi-Fi nodes and the options for wired connections, such as those on the Deco X50 according to TP-Link and the Orbi RBK763S according to NETGEAR.

Manager of a space used by visitors

You want to give visitors access without losing sight of how your work network is managed. The Dutch Data Protection Authority stresses the importance of a secure working environment; VeiligInternetten recommends keeping routers up to date.

What should you look for in mesh Wi-Fi for a workshop?

First check whether the problem in the workshop space is caused by poor Wi-Fi coverage. Then choose a set-up that suits the connection between the Wi-Fi nodes and how the space is used.

What to consider What should you check? Who is this important for?
Coverage in the workshop space Check where the existing signal gets weaker and whether you can add an intermediate node or run a network cable. If my workspace is a long way from the router, I want to know whether a node in a suitable position can relay the signal. Around 36% of consumers say coverage is their top purchasing priority.
Making video calls at the same time Compare wired backhaul with a wireless connection between nodes; assess the connection while it is in use. If several people are in meetings at the same time, I want to make sure the connection between the nodes doesn’t distract from the internet connection itself. Around 29% of consumers prioritise support for simultaneous calls.
Guest access and network management Check the guest network options for the exact model and find out who is responsible for firmware updates. When visitors need Wi-Fi, I want to manage access and work devices carefully and be able to apply updates. Around 21% of consumers put guest access and network management first.
Purchase and installation Decide how many nodes you need and check the ports, what’s included in the box and whether you need PoE equipment. If I’m installing equipment in a shared space, I want to know in advance which cables, ports or power supply my chosen set-up requires. Around 14% of consumers prioritise installation and the equipment needed.

Pitfalls to avoid when buying

  • Confusing maximum Wi-Fi speed with the speed of your workshop call

    Your connection also depends on your internet service, local Wi-Fi conditions and the settings of your meeting service. The Zoom Technical Library presents its bandwidth figures as general guidelines that vary from one situation to another.

    First assess coverage and the connection in your workspace. Test the call using the devices that will be in use at the same time.

  • Putting an extra Wi-Fi node somewhere the signal is already poor

    The additional node also needs to connect to the rest of the network; otherwise, it won’t automatically solve the existing problem in the new location.

    Plan where all the nodes will go before you buy, and check whether ethernet backhaul is possible. Consider the cable route and where the units can be placed.

    You may need a different set-up or cabling.

  • Assuming any PoE switch can power a PoE mesh node

    For the Deco X50-PoE, TP-Link lists support for 802.3at and 802.3bt, but not 802.3af.

    Check the PoE standard supported by the power supply and the exact model variant. TP-Link also lists a DC adapter as an alternative.

    Powering a device over PoE may require compatible equipment and cabling.

  • Assuming a security service or manufacturer’s warranty provides ongoing cover

    NETGEAR includes one year of Armor with the RBK763S. A manufacturer’s warranty is separate from your statutory rights. ACM ConsuWijzer explains that statutory warranty does not give every product a fixed term of exactly two years.

    Check which features remain available after the included period, and distinguish between service terms and your statutory rights.

Brands to consider

TP-Link

The Deco X50 and the separate Deco X50-PoE range are worth comparing if you’re looking at mesh Wi-Fi with wired connections or PoE.

  • According to TP-Link, the Deco X50 has three gigabit ports per unit and supports ethernet backhaul.
  • The X50-PoE is a different model. Powering it over a network cable requires compatible PoE equipment.

ASUS

The ZenWiFi XD5 is a dual-band Wi-Fi 6 mesh option to compare if you’re considering wired backhaul.

  • ASUS describes ethernet backhaul as an option when ethernet ports are available in the walls.
  • You’ll need compatible devices to benefit from Wi-Fi 6. ASUS warns that 160 MHz on 5 GHz may not be available in some countries.

NETGEAR

The Orbi RBK763S is a tri-band mesh system with a router and two satellites, worth comparing when running cables between nodes isn’t practical.

  • NETGEAR describes a dedicated connection between the router and satellites, and lists seven gigabit ports for the system.
  • The stated set-up doesn’t prove that video calls will work better in every room than with another solution that’s been placed well.

Mesh Wi-Fi at Joybuy for a shared workspace

This selection includes mesh systems with multiple units, including models with a wired backhaul option or PoE. Check that the ports and power supply for each version suit your set-up.

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack)

A three-unit mesh system to extend Wi-Fi coverage to several areas of a space.

The product listing describes dual-band Wi-Fi 5 (802.11ac) and two network ports per unit, with speeds of up to 100 Mbit/s through those ports.

View at Joybuy
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack)

A three-unit mesh system for anyone who wants coverage in several areas and may be able to connect the units with a network cable.

According to TP-Link, the Deco X50 supports optional ethernet backhaul and has three gigabit ports per unit. It’s a dual-band Wi-Fi 6 model.

View at Joybuy
TP-Link Deco X50-PoE (2-pack), dual-band Wi-Fi 6

TP-Link Deco X50-PoE (2-pack)

A PoE mesh system for a location where powering the unit over a network cable could be convenient, provided your equipment and cabling are compatible.

The product listing describes two ethernet ports per unit and guest access. TP-Link specifies 802.3at or 802.3bt for PoE and lists a DC adapter as an alternative.

View at Joybuy
TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack)

A three-unit system to compare if you want to connect several areas of your workspace.

The product listing describes tri-band Wi-Fi 6E, three gigabit ports per unit and guest access.

View at Joybuy
TP-Link Deco XE75 (3 nodes), tri-band Wi-Fi 6E

TP-Link Deco XE75 (3-pack)

A three-unit system for anyone who wants to connect several areas and compare guest access options.

The product listing describes tri-band Wi-Fi 6E, three gigabit ports per unit and guest access.

View at Joybuy

Frequently asked questions about mesh Wi-Fi for workshops

Will mesh Wi-Fi fix every workshop connection that keeps dropping?

No. Mesh Wi-Fi can improve wireless coverage in your workspace, but also check that your internet connection is fast enough during the call. The Zoom Technical Library describes its bandwidth figures as general guidelines that vary, among other things, by resolution and meeting format.

Where should you place an extra Wi-Fi node?

Place the node where it can still get a good connection to the network and reach the workshop space. If you can run a network cable, check whether your chosen system supports ethernet backhaul.

Can you use your own router in the Netherlands instead of your internet provider’s?

Yes. According to ACM ConsuWijzer, you’re free to choose your router. There may be exceptions for your own modem, and a provider may set requirements for connection and maintenance. If you’re using your router alongside your provider’s modem, check which settings your set-up requires.

How can you keep a shared network and work data secure?

Where possible, use your organisation’s secure working environment and equipment. This is the advice of the Dutch Data Protection Authority; it doesn’t mean you need a particular mesh system. Keep your router up to date too, and check whether guest access can be set up to suit your needs.

Is the statutory warranty for a mesh system in the Netherlands always exactly two years?

No. ACM ConsuWijzer distinguishes between a manufacturer’s or seller’s warranty and your statutory rights. How long you can reasonably expect a product to work properly with normal use depends on factors including the product itself; two years exactly is not a general statutory period.