Who might benefit from mesh Wi-Fi?

Workshop attendee at the back of the house

What matters most is that the video and audio don’t cut out at your usual workshop spot. So test the connection there, not just next to the router. The Dutch Consumers’ Association recommends placing Wi-Fi extenders where you need the signal.

Householder who can run a cable

You can connect a mesh node via Ethernet and make the connection between nodes less dependent on the wireless signal travelling down the hallway. TP-Link and Google describe Ethernet backhaul for specific mesh products.

Householder without a cable route

You’re looking for a wireless solution and need to work out where an extra node can still get a usable connection to your existing network. The Dutch Consumers’ Association recommends placing Wi-Fi extenders where you need better coverage.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Coverage at your workshop spot Test the connection where you sit and work out where you could place a mesh node. If I take part in the workshop at the far end of the hallway, I want a usable connection right there. Around 36% of consumers make coverage in that spot their top priority.
Stability for video and audio Test the workshop service you use where you sit, and check the internet connection itself too. If I want to take part live, I need the video and audio to keep working throughout the session. Around 29% of consumers prioritise a stable connection during calls.
Installation that suits your home Check how many nodes are included, which connections are available and where you could place them. If I don’t have a cable route or have few suitable spots, I want to be able to set up a system that works in my home. Around 21% of consumers make installation and placement their top priority.
Purchase and support First decide whether you need to buy anything, then check what’s included and the warranty terms. If I want to avoid an unnecessary purchase and need clarity about support, I want to know what’s included in the set beforehand. Around 14% of consumers prioritise purchase and support.

Buying pitfalls

  • Going by the advertised coverage area alone

    An advertised coverage area doesn’t tell you what the connection will be like at your workshop spot at the end of the hallway.

    Assess the placement and connection where you take part in the workshop; don’t treat the manufacturer’s figures as a guarantee for your home.

  • Placing a wireless node where the signal has already dropped out

    A wireless mesh node still needs a connection to another node.

    First, find an intermediate spot where the existing signal is still usable. If that isn’t possible, see whether Ethernet backhaul could work.

  • Treating a different pack size as the same product

    A 2-pack and a 3-pack don’t contain the same number of nodes.

    Check the full model name, the number of units and what’s included in the box before comparing products.

  • Assuming the manufacturer’s warranty covers all your warranty rights

    A manufacturer’s commercial warranty does not determine your statutory rights against the seller.

    Keep your proof of purchase and report any fault to the seller. ACM ConsuWijzer explains the seller’s responsibilities if a product doesn’t perform as you could reasonably expect under normal use.

Brands to consider

TP-Link

The Deco X50 is an expandable Wi-Fi 6 mesh system worth comparing if you’re considering Ethernet backhaul.

  • TP-Link says each Deco X50 unit has three gigabit ports and supports optional Ethernet backhaul.
  • The advertised coverage doesn’t guarantee a connection at the end of your hallway. Also check whether the pack you choose contains one, two or three units.

FRITZ!

The FRITZ!Mesh Set 1700 is worth considering if you want to compare a three-node set and keep your existing router.

  • According to FRITZ!, the 3-pack contains three FRITZ!Repeaters 1700 and can be used with a router.
  • Not every hallway needs a three-node set, so first work out where you could place the nodes.

ASUS

The ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh system worth comparing if you’re considering wired backhaul.

  • ASUS lists wired backhaul as an option for the BD4.
  • Check the pack size for the exact model: a two-node pack is not the same variant as a 3-pack.

Google

Nest Wifi Pro is worth comparing if you’re considering Ethernet backhaul among Google’s mesh solutions.

  • Google describes Ethernet backhaul for Nest Wifi Pro.
  • According to Google, Nest Wifi Pro can’t be combined in one mesh network with older Nest Wifi or Google Wifi nodes.

Joybuy products

These mesh systems are for anyone looking to add extra nodes around the home. Check the pack size and supported connection options for your hallway. Mesh Wi-Fi equipment marketed in the Netherlands as radio equipment must meet European requirements. Check that the exact model carries the required CE marking, as specified by the Dutch Authority for Digital Infrastructure.

TP-Link Deco BE68, 2-pack

TP-Link Deco BE68, 2-pack

This two-node mesh system is worth considering if you want to extend coverage to your workshop spot with an extra node.

For this model, check which connection method is supported between the nodes.

View at Joybuy
TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50, 3-pack

This three-node set could work if you have several suitable spots for placement. First, work out where the nodes could go in your home.

The title specifies dual-band Wi-Fi 6. According to TP-Link, the Deco X50 supports optional Ethernet backhaul.

View at Joybuy
TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro, 3-pack

This three-node set is for anyone comparing several possible placement spots. Before you buy, check that the nodes can maintain a usable connection with one another in those locations.

The product name specifies tri-band Wi-Fi 6E and the 2.4 GHz, 5 GHz and 6 GHz bands.

View at Joybuy
TP-Link Deco XE75, tri-band Wi-Fi 6E

TP-Link Deco XE75, tri-band Wi-Fi 6E

Compare this mesh system with other models if you’re weighing up multiple Wi-Fi bands for the connection between nodes.

The product name specifies tri-band Wi-Fi 6E with 2.4 GHz, 5 GHz and 6 GHz. Check the contents of the exact model’s box.

View at Joybuy
TP-Link Deco X50-PoE, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50-PoE, 3-pack

This three-node set could work if you want to cover several locations. Check that the connections available in your home are suitable for the installation.

The product name specifies PoE, dual-band Wi-Fi 6 and two Ethernet ports.

View at Joybuy

Frequently asked questions

Should I buy a mesh system straight away if the workshop connection drops out at the end of the hallway?

No. First, try adjusting your existing Wi-Fi settings and router placement, then test the connection again at your workshop spot. The Dutch Consumers’ Association notes that you don’t always need a new device.

Can I connect a mesh node using a network cable?

It depends on the model and version. TP-Link lists optional Ethernet backhaul for the Deco X50, while Google describes this option for Nest Wifi Pro. Check the connections and instructions for the exact product.

What can I do if my mesh router breaks down too soon?

In the Netherlands, your statutory guarantee rights are separate from the manufacturer’s warranty. ACM ConsuWijzer explains that, subject to the applicable conditions, the seller is responsible for providing a suitable solution at no extra cost if a product doesn’t perform as you could reasonably expect under normal use.

Which CE requirements apply to mesh Wi-Fi equipment in the Netherlands?

Radio equipment marketed in the Netherlands must meet the applicable European requirements. The Dutch Authority for Digital Infrastructure specifies that equipment must carry the required CE marking. Check the marking on the exact model.