Who is this relevant to?

Home worker at the end of the corridor

Your workspace is beyond the point where the router still provides good coverage, so you want to work out where a relay node would be useful. The Consumentenbond advises placing a range extender closer to the middle of the home when coverage is weak.

Regular creator of work backups

You often transfer work files, or transfer large numbers of them, and may be able to run a cable. The connection between the Wi-Fi nodes is therefore an important consideration; TP-Link describes ethernet backhaul as a connection for data between Deco units.

Worker handling sensitive documents

You want to improve coverage without bypassing your organisation’s storage and security policies. The Autoriteit Persoonsgegevens advises using a secure working environment wherever possible.

What to consider when choosing

Mesh with ethernet backhaul

Choose this option if: you can run a network cable to a suitable spot in or beyond the corridor.

Bear in mind: the cable route and the suitable ports and connections on the system you choose.

Fully wireless mesh

Choose this option if: cabling isn’t practical and you can place a relay node where the existing signal is still strong.

Bear in mind: placement and obstacles; a higher Wi-Fi version alone doesn’t guarantee good coverage at the end of the corridor.

Mesh over powerline

Choose this option if: a network cable isn’t practical, wireless nodes can’t reach each other well enough and you have suitable power sockets.

Bear in mind: powerline works differently from ethernet backhaul; also check which adapters are compatible with each other.

Consideration What should you check? Who is this important to?
Coverage and placement Check how many nodes the system includes, where you can place them and whether the set-up support helps you assess the connection between nodes. If my workspace is at the end of the corridor, I want to know where a relay node can still get a good connection to the network. Around 36% of consumers give coverage and placement the highest priority.
Stability of the backup connection Check whether the system supports ethernet backhaul, which ports are available and whether you can assess the connection after installation. For regular or large work backups, I mainly want to know how the mesh nodes connect to each other. Around 29% of consumers put a stable transfer at the top of their list.
Security of work documents Check the Wi-Fi security and updates available; make sure the backup destination complies with your organisation’s rules. If my documents are sensitive, I want to use an approved storage destination rather than relying solely on better Wi-Fi coverage. Around 21% of consumers give secure work storage the highest priority.
Connection to your existing network Check how it connects to your router and any existing adapters, the power supply required and whether you need any extra ports. Anyone who wants to connect the system to existing equipment will want to know in advance which power supply, adapters and connections are needed. For around 14% of consumers, easy integration comes first.

Pitfalls when buying and using

  • Putting the only extra node right at the end of the corridor

    The new node still needs to be able to establish a usable connection to the network.

    Try a spot in between first, and check the connection between the nodes during set-up.

    If that spot doesn’t work, you may need another node or to run a cable after all.

  • Assuming the advertised Wi-Fi speed is the backup speed

    The Wi-Fi version or claimed radio speed doesn’t show what speed you’ll get at your workspace. The Consumentenbond notes that the Wi-Fi version alone doesn’t say enough about performance.

    Compare the backhaul route, placement and available ports before choosing a higher Wi-Fi version.

  • Assuming PoE or powerline will be compatible automatically

    According to TP-Link, the Deco X50-PoE requires power in line with IEEE 802.3at or IEEE 802.3bt; IEEE 802.3af isn’t sufficient. Devolo says that Magic adapters don’t work with the older dLAN range.

    Check the power supply, version and existing adapters for the exact model.

    You may need a suitable PoE switch, cable or different powerline adapters.

  • Assuming a better home network means your work backup is approved

    A stronger Wi-Fi connection doesn’t determine where work documents may be stored or how they must be protected.

    Use your secure working environment wherever possible and check which backup method your organisation allows. The Autoriteit Persoonsgegevens advises using your organisation’s secure environment wherever possible.

Brands to consider

TP-Link

The Deco range includes mesh systems with ethernet backhaul. The Deco X50-PoE V2 is a separate model designed for installation with a suitable PoE power supply.

  • According to TP-Link, the Deco X50-PoE V2 has two 2.5 Gbps ports and supports PoE.
  • Check the hardware version and power supply; these specifications don’t automatically apply to other Deco models. TP-Link lists IEEE 802.3at and IEEE 802.3bt as suitable PoE standards for this model.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh range for which ASUS describes ethernet backhaul when ethernet ports are available in the walls.

  • The wired connection described may be useful if ethernet ports are already available between the nodes.
  • Advertised wireless speeds aren’t a measure of backup speed at the end of your corridor.

devolo

Magic 2 WiFi next combines mesh Wi-Fi with a connection between adapters over the powerline, offering an alternative when running a network cable isn’t practical.

  • According to devolo, the Wi-Fi adapter has two gigabit LAN ports and works with adapters from the Magic range.
  • Devolo says the older dLAN range isn’t supported; the product’s claims don’t guarantee how it will work or what speed you’ll get in a particular home.

FRITZ!

According to the manufacturer, the FRITZ!Mesh Set 1700 can also be used via LAN with a router from another brand.

  • FRITZ! lists automatic updates and a guest network among the features of this set.
  • Check how the set connects to your router; Wi-Fi 7 alone doesn’t prove you’ll get better coverage where you need to back up.

Mesh products at Joybuy

These product options are mesh systems with multiple placement points, including models for different Wi-Fi generations and wired connections. Check each version to make sure its backhaul route and connections suit your corridor and router.

TP-Link Deco X50 mesh system, 3-pack, Wi-Fi 6

TP-Link Deco X50 (3-pack)

The three-unit mesh system gives you several points to place along the corridor.

Wi-Fi 6; optional ethernet backhaul. According to the product description, each unit has three gigabit ethernet ports.

View at Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600

A mesh router can be a good starting point if you want to expand your network with multiple units.

Dual-band Wi-Fi 7; the product description mentions mesh expansion under one network name.

View at Joybuy
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

Huawei eKit OptiX FG630 AX3000

This mesh router may suit you if you want to build a mesh network with multiple nodes.

Dual-band Wi-Fi 6; the product description mentions roaming under one network name.

View at Joybuy
TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack)

The three-unit system gives you several possible places to position nodes in a mesh network.

Tri-band Wi-Fi 6E with 2.4 GHz, 5 GHz and 6 GHz bands. According to the product description, each unit has three ethernet ports.

View at Joybuy
TP-Link Deco XE75, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 (3-pack)

The three-unit system gives you several possible places to position nodes in a mesh network.

Tri-band Wi-Fi 6E with 2.4 GHz, 5 GHz and 6 GHz bands. According to the product description, each unit has three ethernet ports.

View at Joybuy

Frequently asked questions

Where should you put a mesh node if coverage is poor at the end of the corridor?

Try an intermediate spot where the node still has a good connection to the previous one, then check the connection at your workspace. The Consumentenbond advises placing it closer to the middle of the home when coverage is weak at the back, with as few obstacles as possible.

Will a mesh system with a higher Wi-Fi speed make your cloud backup faster?

Not necessarily: the Wi-Fi version or claimed radio speed alone doesn’t tell you enough about performance. The Consumentenbond also advises checking the connection between nodes; you should also find out where any delay is occurring.

Can you back up work documents to your personal cloud storage if the Wi-Fi works?

Better Wi-Fi coverage doesn’t give you permission to do that. The Autoriteit Persoonsgegevens advises using a secure working environment wherever possible; check with your organisation which backup destinations are allowed.

Do you need a permit or registration for home Wi-Fi mesh in the Netherlands?

According to the Rijksinspectie Digitale Infrastructuur, no notification or registration is required for Wi-Fi frequency use that falls under the permit-free rules. This doesn’t exempt equipment from the applicable product regulations.

What can you do if a mesh system breaks down too soon under normal use?

According to ACM ConsuWijzer, you have a legal guarantee as well as any manufacturer’s warranty. Under the applicable conditions, the seller must repair or replace a faulty product free of charge, or sometimes refund you; there isn’t one fixed legal guarantee period for every purchase.