Who is this relevant for?

Someone working from home with a NAS on another floor

You want to store work documents locally and need to consider the entire network route between your workspace and storage. TP-Link describes the port options on its Deco systems; the National Cyber Security Centre advises setting up backups separately and testing them.

Someone working from home without Ethernet between floors

You need coverage across multiple floors and must place mesh nodes where they can connect to each other wirelessly. The Dutch Consumers’ Association warns that the Wi-Fi version alone doesn’t determine performance; the Dutch Authority for Digital Infrastructure notes that 5GHz Wi-Fi generally has a shorter range than 2.4GHz.

Small office with several work devices

As well as coverage, consider connections, management and how your backups are set up. The Dutch Authority for Digital Infrastructure highlights centralised management of updates and security settings as an important consideration for devices in organisations.

What should you look for in mesh Wi-Fi for work backups?

Mesh with Ethernet backhaul

Choose this if: you already have Ethernet cables between floors, or can install them, and use a local backup destination.

Bear in mind: installation work, and the speed of every port and link, including those on a switch and NAS.

Wireless mesh

Choose this if: you can’t install cables and can place the mesh nodes where they have a strong enough connection to each other.

Bear in mind: floors, distance and interference can affect data transfer; Wi-Fi 7 or extra bands don’t guarantee a particular speed in your home.

Extend your existing network

Choose this if: a wired access point or a suitable extension to your existing network can reach the floor with poor coverage.

Bear in mind: compatibility and available management features depend on your router and the equipment you choose.

What to consider What should you check? Who should pay particular attention?
Connection between floors Check whether you can use Ethernet between the mesh nodes; if not, test your planned placement and the connection between the nodes. If I’m backing up to a NAS on another floor, I want to know whether the mesh nodes can connect to each other. Around 33% of consumers prioritise this connection between floors.
Transfer to the backup destination Map the route through your computer, mesh nodes, any switches and storage; distinguish between a local NAS and a cloud backup. For a local backup, I want to know which link limits my transfer speed; for the cloud, the internet connection matters too. Around 27% of consumers prioritise transfer speed.
Installation and connections Check how many nodes you need, which cables or switches you already have, and whether you can keep your existing router. I want to make use of my existing network without unnecessary installation work or equipment. Around 20% of consumers prioritise easy integration and manageable costs.
Backup and recovery Check where copies are stored and whether you’ve carried out a restore; also keep router updates and network management up to date. I don’t want to assume that documents can be recovered just because the connection works. Around 20% of consumers prioritise data protection and recovery.

Buying pitfalls

  • Mistaking the combined Wi-Fi speed for the speed of a single backup

    The advertised radio speed isn’t a measure of the transfer speed to your storage. The Dutch Consumers’ Association stresses that the Wi-Fi version alone doesn’t determine performance.

    First map the route to your backup destination and check the speed of the ports you’ll use; only then compare Wi-Fi generations.

    A higher specification can’t overcome a slower port or a slower connection between mesh nodes.

  • Expecting extra mesh nodes to automatically fix a poor connection through floors

    Wireless mesh nodes need a usable connection of their own. Adding another node somewhere with poor reception won’t automatically solve the problem.

    Test possible locations and look into Ethernet between floors if the wireless route isn’t good enough.

    An unsuitable setup could mean you need extra nodes or have to install cables after all.

  • Confusing a stable network with a recoverable backup

    A working network connection doesn’t prove that files have been saved or can be restored later. The National Cyber Security Centre advises checking backups and carrying out a restore test.

    Set up your copies and restore tests separately from your mesh purchase.

    Without checking that recovery works, you could lose work documents if a backup turns out to be unusable.

Brands worth comparing

TP-Link

TP-Link offers the Deco X50 with gigabit ports and the Deco BE65 (EU) V1 with 2.5Gbps ports. TP-Link says both systems support a wired connection between Deco units.

  • The ports on these models give you a clear basis for comparing wired backup routes.
  • The stated Wi-Fi speed and coverage don’t guarantee transfer speeds through the floors of a particular home.

FRITZ!

According to FRITZ!, the FRITZ!Mesh Set 4200 (3-pack) consists of three FRITZ!Repeater 3000 AX nodes and can be connected to an existing router via LAN.

  • Each FRITZ!Repeater 3000 AX has two gigabit LAN ports.
  • If you need more than gigabit through a single LAN port, bear this port specification in mind. Also check which features work with your router.

ASUS

The ASUS ZenWiFi XT9 is a tri-band Wi-Fi 6 system. ASUS lists two 5GHz bands alongside 2.4GHz.

  • The band specifications give you specific details to compare if you need a wireless connection between mesh nodes.
  • ASUS says 160MHz on 5GHz may not be available in some countries; the specifications don’t predict how the system will perform in a particular home.

NETGEAR

NETGEAR describes the Orbi 770 as a tri-band Wi-Fi 7 mesh range with a wireless connection between mesh nodes.

  • NETGEAR lists 2.5Gig Ethernet on every unit, giving you a point of comparison when checking port speeds.
  • NETGEAR’s performance and coverage claims come from the manufacturer; they aren’t measurements of the backup route in your building.

Mesh Wi-Fi products on Joybuy

This selection includes mesh sets with multiple nodes, including options that let you compare wired connections and wireless links between nodes. Check which setup suits your building and the entire route to your backup destination.

ASUS ZenWiFi BT8 2-pack, white

ASUS ZenWiFi BT8 (2-Pack), Wi-Fi 7, white

An option to compare if you’re considering a wireless mesh setup with two nodes.

2-pack with tri-band Wi-Fi on 2.4GHz, 5GHz and 6GHz; Wi-Fi 7 (802.11be).

View on Joybuy
TP-Link Deco X50 3-pack

TP-Link Deco X50 (3-Pack), Wi-Fi 6

An option to compare if you want to use three mesh nodes and a wired connection between Deco units.

3-pack; dual-band Wi-Fi 6 (2.4GHz and 5GHz); three gigabit ports per unit; supports Ethernet backhaul according to TP-Link.

View on Joybuy
ASUS ZenWiFi BT10 2-pack

ASUS ZenWiFi BT10 (2-Pack), Wi-Fi 7

An option to compare if you’re considering a wireless mesh setup with two nodes.

2-pack with tri-band Wi-Fi on 2.4GHz, 5GHz and 6GHz; Wi-Fi 7 (802.11be).

View on Joybuy
TP-Link Deco XE75 Pro 3-pack

TP-Link Deco XE75 Pro (3-Pack), Wi-Fi 6E

An option to compare if you’re considering three mesh nodes and tri-band Wi-Fi for a multi-floor setup.

3-pack; tri-band Wi-Fi 6E on 2.4GHz, 5GHz and 6GHz; three Ethernet ports per unit.

View on Joybuy

Frequently asked questions

Does mesh Wi-Fi back up my work documents?

No. Mesh provides the network connection; set up backup software and a destination for your copies separately. The National Cyber Security Centre advises keeping copies separate and checking that they can be restored by carrying out a restore test.

Where should I place mesh nodes if there’s no cable between floors?

Place the nodes where they still have a usable wireless connection to each other, then test the connection at your workspace. The Dutch Authority for Digital Infrastructure notes that 5GHz Wi-Fi may have a shorter range than 2.4GHz.

Do I need a licence to use standard Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi can be used without a licence under the applicable conditions, with no notification or registration requirement; this also applies to business use. Radio equipment sold in Europe must carry the CE marking.

What warranty applies if I buy the system for work?

ACM ConsuWijzer explains the statutory guarantee for consumer purchases. If you use the purchase mainly or exclusively for business, that consumer protection doesn’t automatically apply, according to ACM. So before buying, check the seller’s and manufacturer’s terms and the capacity in which you’re making the purchase.

Do I need faster internet to back up to a NAS on my own network?

Not just for a local NAS route: first check the connections between your computer, mesh nodes and storage. For a cloud backup, the internet connection matters too. The destination and your existing connections determine which speed is right for you.