Who is this choice relevant to?

People using a study at the far end of the house

If the signal weakens behind walls or between floors, it’s more important to start by checking where the mesh nodes are placed and how they connect to one another than to focus on their advertised top speed. Consumentenbond points out that walls and ceilings can interfere with Wi-Fi and recommends placing an extender where the signal is still strong.

Teams designing and meeting at the same time

If several people need to connect at once, it’s worth considering both Wi-Fi and wired connections when choosing a system. Consumentenbond tests Wi-Fi and wired connections with multiple devices connected; for fixed workstations, also check how many Ethernet ports each node has.

People managing a shared network

If you want to keep your existing router or give guests access, check the network mode and the available access settings. TP-Link, for example, states that Deco’s gateway features are disabled in access point mode; capabilities vary by model and configuration.

What should you look for in mesh Wi-Fi?

Mesh with Ethernet backhaul

Choose this if: there’s a suitable network cable or working network connection between the studio and the study.

Bear in mind: you’ll need the right cabling, ports and wired mesh configuration for your chosen nodes.

Fully wireless mesh

Choose this if: running cables isn’t practical and you can place an intermediate node where it still gets a good signal from the previous one.

Bear in mind: distance, walls, ceilings and signal reception between nodes all matter, so test the connection in the study too.

Move your router first or add a single node

Choose this if: a wired test gives good results and you want to see whether your current router is simply in a poor location, or if only the study needs extra Wi-Fi coverage.

Bear in mind: moving the router may require cabling, and adding one node won’t necessarily provide coverage in every room.

What to consider What should you check? Who is this important for?
Coverage in the study Check whether wired backhaul is possible. If not, place an intermediate node where the signal from the previous node is still strong, then test the connection in the study. If I work in the study, I want to know whether the signal reaches the room and whether an intermediate node can be placed effectively. Around 36% of consumers prioritise usable coverage there.
Several people using the studio at once Compare the number and speed of the Ethernet ports on each node. Also test the internet connection using a network cable before assuming a Wi-Fi upgrade is the answer. When several people are designing or meeting at the same time, I want to know whether the connection and wired ports will suit those workstations. Around 29% of consumers give simultaneous use in the studio top priority.
Connecting to your existing router Check which network modes are available and decide which device will manage the network. TP-Link states that Deco’s gateway features are disabled in access point mode. If I want to keep using my existing router, I want to know in advance which features will remain available with that setup. Around 21% of consumers prioritise keeping their existing network configuration.
Guest access and maintenance Check the guest network, supported encryption, update management and which features remain available in your chosen network mode. When visitors need Wi-Fi, I want to manage access and maintain the network. Around 14% of consumers give access management top priority.

Common buying mistakes

  • Placing an extra wireless node in a dead zone

    A mesh node needs a usable connection to the previous node. Distance and obstacles can weaken the signal there too; Consumentenbond recommends placing an extender where the signal is still strong.

    First, try an intermediate location or find out whether Ethernet backhaul is possible.

  • Treating advertised Wi-Fi speeds or coverage as a guarantee

    An advertised top speed or coverage area doesn’t tell you how the system will perform in your studio and study. Consumentenbond notes that the Wi-Fi version alone doesn’t determine performance.

    Compare the connection between the nodes and their ports. Where possible, test the intended locations before making a choice.

  • Choosing access point mode and expecting all router features to remain

    According to TP-Link, Deco’s gateway features are disabled in access point mode, with the existing router managing the network functions.

    Decide in advance which device should manage the network and check which features will remain available in your preferred mode.

Brands to compare

TP-Link

The Deco X50 is worth considering if you want to compare Wi-Fi 6 and multiple Ethernet ports per node, with the option of connecting the mesh nodes wirelessly or by cable.

  • TP-Link lists three gigabit ports per Deco X50 node and optional Ethernet backhaul.
  • According to TP-Link, gateway features aren’t available in access point mode. The advertised coverage isn’t a measurement of your space.

ASUS

The ZenWiFi BD4 is an expandable dual-band Wi-Fi 7 option; the ZenWiFi AX XT8 is a separate tri-band Wi-Fi 6 option.

  • ASUS lists wired backhaul for the BD4 and a configurable second 5GHz band for the XT8.
  • The XT8’s wireless backhaul description doesn’t automatically apply to the BD4. Actual coverage depends on where you place the nodes.

FRITZ!

According to the manufacturer, the three-node FRITZ!Mesh Set 1700 is an expandable Wi-Fi 7 set that can be used with an existing router or modem.

  • FRITZ! lists one gigabit LAN connection per node and a five-year warranty for this set.
  • Check that the connections suit your workstations; the manufacturer’s specifications aren’t a speed test of your layout.

devolo

According to devolo, the WiFi 7 Mesh BE6500 is available as a two- or three-piece set, as well as an additional node.

  • The manufacturer lists one 2.5G port and three gigabit ports per device.
  • An advertised data rate isn’t a measurement of the throughput between your studio and study.

Mesh Wi-Fi at Joybuy

These mesh sets are designed to extend Wi-Fi between a shared design studio and a study further away. Compare the connections between the nodes and their ports with your own setup. Before buying, check that the device itself bears the correct CE marking; the Dutch Authority for Digital Infrastructure states that this is mandatory for Wi-Fi routers.

TP-Link Deco BE68 2-pack mesh Wi-Fi system

TP-Link Deco BE68 2-pack

An option if you want to connect the mesh nodes by cable or connect wired devices to them.

The product description lists two mesh nodes, wired and wireless backhaul, and 10G, 2.5G and 1G WAN/LAN ports per node.

View at Joybuy
ASUS ZenWiFi BT8 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 2-pack

A mesh option to compare if Wi-Fi 7 and guest access matter in your shared space.

The product name lists tri-band Wi-Fi 7 with 2.4GHz, 5GHz and 6GHz bands. The product information lists 1G and 2.5G Ethernet ports and a guest network feature.

View at Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack

An option if you want three mesh nodes and the flexibility to use Ethernet backhaul.

The product information lists dual-band Wi-Fi 6, three included nodes, optional Ethernet backhaul and three gigabit Ethernet ports per node.

View at Joybuy
TP-Link Deco X50-PoE 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50-PoE 3-pack

An option to compare if a wired PoE setup suits your workstations.

The product information lists three mesh nodes, dual-band Wi-Fi 6, PoE, two Ethernet ports per node and WPA3.

View at Joybuy
TP-Link Deco X50 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50 2-pack

An option if you want to compare a two-node mesh set with the option of using Ethernet backhaul.

The product information lists dual-band Wi-Fi 6, two nodes, optional Ethernet backhaul and three gigabit Ethernet ports per node.

View at Joybuy

Frequently asked questions

Where should I place a wireless mesh node for a study at the far end of the house?

Don’t automatically put it in the room with the weakest reception. Choose an intermediate spot where the node still gets a good connection from the previous one, then test the signal in the study.

Can I keep using my existing router?

Yes, with a system that supports access point mode. TP-Link says Deco can work alongside an existing router, but notes that gateway features are disabled in this mode. Check which features are available in the mode you choose for your model.

Should I get a faster broadband package if the connection in the study is slow?

First, test the internet connection using a network cable. If the wired test is good but the connection in the study is weak, you should also check the Wi-Fi connection between the rooms and where the nodes are placed.

What should I look for in a Wi-Fi device for use in the Netherlands?

Check that the device itself bears the correct CE marking and follow the instructions. The Dutch Authority for Digital Infrastructure states that this marking is mandatory for Wi-Fi routers; a model name alone doesn’t confirm that the specific device is marked.

Do I need a licence or registration for normal Wi-Fi use in the studio?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi use on the designated licence-exempt frequencies doesn’t require a licence or registration, including for business use. Licence-exempt doesn’t mean interference-free, so use equipment in accordance with the applicable conditions.