Who should consider this?

Studio with weak coverage between floors

You want to reach workspaces on every floor and may be able to install Ethernet. So compare where to place the points and how to connect them before relying on advertised coverage. TP-Link Netherlands and ASUS describe models with different placement and backhaul options.

Studio with lots of devices in use at once

You use workstations, mobile devices and online collaboration tools at the same time. Check the connections and management features, and don’t treat stated device capacity as a guarantee of performance in your studio. TP-Link Netherlands and Ubiquiti describe relevant features across their models.

Studio that gives visitors internet access

You want to give visitors internet access without automatically letting them access internal devices. Compare the guest network settings and any network and device isolation options. TP-Link Netherlands and Ubiquiti describe different features.

What should you look for when buying?

Mesh with Ethernet backhaul

Choose this when: Ethernet is already installed between floors or can be added, and you want to manage your mesh points easily.

Bear in mind: you’ll need cables and, for PoE models, a suitable power supply or switch.

Wireless tri-band mesh

Choose this when: installing Ethernet isn’t practical and a trial setup shows a usable connection on every floor.

Bear in mind: an extra radio band is no substitute for testing the signal through floors and walls.

Centrally managed access points

Choose this when: you need separate networks, guest isolation and more advanced management, and can arrange cabling and PoE.

Bear in mind: a standalone access point isn’t a complete mesh system. Factor the power supply and management platform into your setup.

What to consider What should you check? Who is this most relevant to?
Coverage between floors Compare wired and wireless backhaul, and test the planned position of the points on every floor. If I need usable Wi-Fi at the workspace furthest away, I want to test the connection there first. Around 33% of consumers make coverage their top buying priority.
Simultaneous use and connections Check the Ethernet ports, backhaul and management features alongside your internet connection. Don’t treat maximum speeds as results measured on site. When several workspaces are collaborating online at the same time, I look at connections and management. Around 27% of consumers give simultaneous usage their top priority.
Guest access and separation Check which network and device isolation settings are available, and test the access rules with a guest device. If visitors need to get online without automatically accessing studio devices, I want to be able to control that access. Around 20% of consumers prioritise guest access and separation.
Installation and infrastructure Take stock of existing cables and sockets. For the Deco X50-PoE, check whether your chosen PoE supply supports 802.3at or 802.3bt; TP-Link states that 802.3af is not supported. If I want to keep installation and the required infrastructure manageable, I map out the cables and power supply first. Around 20% of consumers name installation as their top priority.

Common buying mistakes

  • Assuming the combined Wi-Fi speed is the speed you’ll get at one workspace

    Manufacturers sometimes quote combined theoretical speeds for a system or band. This doesn’t tell you what speed a designer will get in a specific spot.

    Compare the backhaul and ports too, and test the system at your busiest workspaces.

  • Buying a PoE point without a suitable power supply

    PoE standards vary by model. So, before deciding where to mount the Deco X50-PoE or UniFi U7 Pro, check that your chosen power supply is compatible.

    Check the PoE standard and per-port power supply of the switch or power adapter before running cables.

  • Assuming a guest network provides tested isolation

    A guest network name alone doesn’t tell you what access has been set up to internal networks or other guest devices.

    Decide what access visitors need, then test the access rules with a guest device after setting them up.

Brands to compare

TP-Link

The Deco range in the Netherlands includes mesh models for different placement and backhaul options.

  • TP-Link Netherlands describes the Deco X50-PoE as suitable for ceiling or wall mounting, with PoE. Each Deco BE65 unit has four 2.5Gbps ports.
  • These model specifications don’t show how well Wi-Fi will reach across the floors of a particular studio.

ASUS

The ZenWiFi BT8 is a tri-band Wi-Fi 7 mesh model you can compare for wireless placement and Ethernet backhaul.

  • ASUS lists two 2.5G Ethernet ports and an option for wired backhaul.
  • The manufacturer’s combined speed rating isn’t a measured speed for one device or workspace.

Ubiquiti

The UniFi U7 Pro is a standalone access point with wireless meshing, for studios considering more advanced network management.

  • Ubiquiti lists a 2.5GbE uplink, PoE+, guest network isolation and client isolation.
  • A standalone access point isn’t a complete package, so remember to factor in the required power supply and management platform.

NETGEAR

The Orbi 770 range is a tri-band Wi-Fi 7 mesh option to compare if you’re looking for several ready-to-use points.

  • NETGEAR lists wired backhaul as an option for the RBE773 three-pack.
  • The stated capacity for simultaneous devices applies to this model; it isn’t an independently measured result for a studio.

Joybuy products

These Joybuy product picks cover mesh Wi-Fi for multiple floors, with mesh systems across different Wi-Fi generations, numbers of points and connection options.

ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7

A two-point mesh system to compare for shared Wi-Fi and guest access.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 7 (802.11be); two 2.5Gbps ports; guest network.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

A two-unit mesh system to compare if a wired connection between the points is important.

Wi-Fi 6; Ethernet backhaul and a separate guest network are listed in the product description.

View at Joybuy
ASUS ZenWiFi BT10 (2-pack), tri-band Wi-Fi 7

ASUS ZenWiFi BT10 (2-pack), tri-band Wi-Fi 7

A two-unit mesh system to compare if you also want to connect wired devices.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 7 (802.11be); two 10G Ethernet ports; guest network.

View at Joybuy
TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

A three-unit mesh system to compare if you want to spread Wi-Fi across several points.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 6E (802.11ax); three Ethernet ports per unit; guest access.

View at Joybuy
TP-Link Deco X50-PoE (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50-PoE (3-pack), dual-band Wi-Fi 6

A three-point mesh system to compare if you want to power the points over Ethernet.

Dual-band 2.4 GHz and 5 GHz; Wi-Fi 6 (802.11ax); two Ethernet ports per unit. TP-Link lists 802.3at and 802.3bt as supported PoE standards, but not 802.3af.

View at Joybuy

Frequently asked questions

Do I need a frequency licence for Wi-Fi in a Dutch studio?

According to the Dutch Authority for Digital Infrastructure (RDI), Wi-Fi in homes and commercial buildings is licence-exempt if you use the designated frequencies and comply with the conditions of use. The RDI also states that radio equipment must meet the applicable requirements and carry a CE marking. Check the specific model and settings before use.

What power supply do I need for a ceiling-mounted Deco X50-PoE?

TP-Link lists 802.3at and 802.3bt as supported PoE standards, but not 802.3af. TP-Link also states that a DC adapter is included. Before installation, check that your chosen switch or adapter and its connections are suitable for the power supply you need.

Is a guest network automatically fully separated from studio devices?

Don’t assume that it is. Ubiquiti describes separate settings for network and client isolation. Check the access rules for your chosen configuration and test them with a guest device.

What do privacy rules mean if the studio processes Wi-Fi users’ data?

If the studio processes personal data, its setup must take the GDPR into account. The Dutch Data Protection Authority advises businesses, among other things, to establish what data they process, why they process it and how they protect it. A guest network on its own doesn’t amount to a full GDPR assessment.