Who is this relevant to?

Viewer with one room with a weak signal

Your video library works in one part of your home but keeps buffering somewhere else. You want to know whether better placement will be enough or whether you need a second Wi-Fi point. The Consumentenbond recommends placing Wi-Fi boosters where you want to improve the signal.

Sharing a local video library

You want to access videos stored on a computer or NAS from your TV or other playback devices. That’s why both your local network setup and guest access settings matter. Plex Support explains how to use devices on the same local network.

Renter looking to expand without a permanent installation

You’re looking for a movable setup to use alongside your existing provider equipment, with only as many points and cables as you need. Think about placement, power sockets and how the network will work with your existing router before you get started.

What should you look for?

First, check the signal where you watch. Then check local access to your video library, and finally consider whether a wired connection between Wi-Fi points is practical.

What to consider What should you check? Who is this important for?
Signal where you watch Test the network where you watch and check how many units are included in the pack. If I can watch comfortably in one room but not another, I first want to know whether better placement will help. Around 33% of consumers give signal strength where they watch top priority.
Local access Check the guest access settings and test the server and playback device on the local network you intend to use. I want my TV or other playback devices to access my local video library, even when I use guest access settings. Around 33% of consumers prioritise access to shared videos.
Connection between points Check whether Ethernet backhaul is supported, how many ports are available and whether running a cable is practical. If I need a second point, I want to know whether it will connect properly to the first one in the chosen location. Around 17% of consumers give the connection between Wi-Fi points top priority.
Simple setup for a rented home Check the supported operating mode, the space and power sockets required, and how the system works alongside your existing router. I want a movable setup with as little extra equipment as possible and no permanent changes. Around 17% of consumers prioritise a simple setup in a rented home.

Common pitfalls

  • Assuming a large advertised coverage area means you need several points

    The placement of the units and the layout of your home both make a difference. An extra point is most useful when the signal is too weak where you need to watch.

    First, check where the connection is unreliable. Add another unit only if you need it to improve coverage; it will also need a suitable location and a power socket.

  • Expecting a device on an isolated guest network to find your video library

    TP-Link states that Deco’s guest network is isolated from the main network in router mode. As a result, a playback device may not be able to reach the server.

    Test the server and playback device on the network you want to use, and check the settings for the exact model.

  • Overlooking the full pack configuration

    A single unit and a pack with several units aren’t the same setup. The number of devices and available ports affect where and how you can set up and connect the system.

    Before buying, compare the full model name, the number of included units and the connections.

Brands to consider

TP-Link

The Deco X50 range includes a Wi-Fi 6 two-point set. TP-Link lists Ethernet backhaul as an option for connecting Deco units.

  • TP-Link lists three gigabit ports per X50 unit.
  • Advertised speeds and coverage are manufacturer figures. Check whether you need two points and how local access works when using a guest network.

ASUS

The ZenWiFi XD4 Plus is also available as a standalone AX1800 unit and, according to ASUS, can be expanded with AiMesh.

  • ASUS specifies one gigabit WAN/LAN port and one gigabit LAN port for the XD4 Plus.
  • One unit doesn’t provide a second Wi-Fi point. Check that the pack configuration suits your needs and whether you might need an extra unit later.

FRITZ!

According to FRITZ!, the two-piece FRITZ!Mesh Set 1700 includes two repeaters and is designed to work with a FRITZ!Box or another router.

  • FRITZ! lists one gigabit LAN connection on the Repeater 1700.
  • Check which connection method and features are compatible with your existing router. A two-piece set isn’t automatically necessary in a compact home.

Products at Joybuy

These product options include a single unit for an expandable starter setup, as well as two-unit sets for a potential weak spot. When buying, check that the specific device has the correct CE marking; the Dutch Authority for Digital Infrastructure states that Wi-Fi radio equipment sold in the Netherlands must meet this requirement.

TP-Link Deco BE68 mesh set with two units

TP-Link Deco BE68 (2-pack)

A two-unit set for a setup with an extra Wi-Fi point.

Wi-Fi 7; wireless and wired backhaul. The description lists 10 Gbps, 2.5 Gbps and 1 Gbps WAN/LAN ports per unit.

View at Joybuy
ASUS ZenWiFi BT8 mesh set with two units

ASUS ZenWiFi BT8 (2-pack)

A two-unit set for anyone looking to use two mesh points.

Tri-band Wi-Fi on 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 7. The description mentions AiMesh integration and Ethernet ports on each unit.

View at Joybuy
ASUS ZenWiFi BD4 mesh unit

ASUS ZenWiFi BD4

A single mesh unit for a starter setup when one Wi-Fi point is enough.

Wi-Fi 7 with dual-band on 2.4 GHz and 5 GHz; two Ethernet ports per unit. The description mentions wired backhaul and expansion with other ASUS mesh systems.

View at Joybuy
ASUS RT-AX52 AX1800 router

ASUS RT-AX52 AX1800 AiMesh router

A router to consider if you’re looking to expand your setup with compatible ASUS routers using AiMesh.

Wi-Fi 6, dual-band on 2.4 GHz and 5 GHz, and three gigabit Ethernet ports.

View at Joybuy
Huawei eKit OptiX FG736 BE3600 mesh router

Huawei eKit OptiX FG736 BE3600

A mesh router for anyone looking to expand their setup with multiple units.

Dual-band Wi-Fi 7. The description says multiple units can work together as a mesh network with one SSID.

View at Joybuy

Frequently asked questions

Do the server and TV need to be on the same network?

For Plex, Plex Support explains how to use devices on the same local network. Check the network requirements of any other video service, and don’t automatically give a playback device access only through an isolated guest network.

Why can’t I see my shared videos on the guest network?

TP-Link states that Deco’s guest network is isolated from the main network in router mode. According to TP-Link, local access can be configured in access point mode; available features may vary by model and software version.

Can I use my own router alongside my internet provider’s equipment?

ACM ConsuWijzer confirms that you can choose your own router and outlines the conditions for connecting it to a provider’s network. The settings you’ll need depend on your connection and the setup you choose.

Do I need a licence to use Wi-Fi at home?

According to the Dutch Authority for Digital Infrastructure, you can use Wi-Fi at home without a licence if you use the designated frequencies and follow the conditions of use. The RDI also recommends choosing the correct country settings.

Do my rights end when the manufacturer’s warranty expires?

No. ACM ConsuWijzer distinguishes between a manufacturer’s warranty and your statutory rights. There isn’t a fixed period for every product that you can reasonably expect it to last.