Start by identifying where your seminar connection drops out. Mesh can improve Wi-Fi coverage in other rooms, but it won’t increase the capacity of your internet connection. If you can run a cable to your workspace or between mesh units, this can reduce your reliance on wireless connections. If not, the placement of the units and the connection between them matter more than a high advertised Wi-Fi speed alone.
Who can benefit from mesh Wi-Fi?
Seminar attendees on another floor
If Wi-Fi is weak where you usually work, you’ll want to know where mesh units can go and whether you can run a cable. The Consumers' Association points out that the Wi-Fi version alone doesn’t determine performance.
Households with simultaneous video calls
If you’re presenting while other people at home are on video calls, consider the available upload speed on your internet connection, not just the advertised Wi-Fi speed. Zoom’s bandwidth recommendations vary depending on how you use it and the video quality.
Users with a provider-supplied modem
If you’re adding mesh to your provider’s equipment, you’ll want to avoid accidentally creating a second router network. The ACM’s consumer information service points out that provider settings may be relevant when you connect your own equipment.
What should you look for when choosing?
First, map out where the connection drops out and whether it also happens next to the main router. Then choose based on coverage, connection options and where you can place the mesh units.
| What to consider |
What should you look for? |
Who is this important for? |
| Coverage in your workspace |
Work out where calls drop out and check how many mesh units you’ll need for the locations you have in mind. |
If your usual seminar spot is outside the router’s range, you’ll want to know whether a mesh unit can be positioned there effectively. Around 26% of consumers prioritise coverage. |
| Simultaneous calls |
Compare the connection in your workspace with the one next to the main router, and check both upload and download speeds while several people are online. |
If you’re presenting while others at home are on video calls, you’ll want to know whether your internet connection can cope with the combined demand. Around 26% of consumers prioritise simultaneous calls. |
| Connecting to your provider’s equipment |
Check the router or access point mode, the number of Ethernet ports on each unit, and any connection instructions from your provider. |
If you want to keep using your provider’s router, you’ll need a set-up that works with it and has the connections you need. Around 21% of consumers prioritise ease of connection. |
| Security and maintenance |
Check for the CE marking on the product supplied and find out how firmware updates are provided. |
If you use networking equipment at home, you’ll want to know which markings and maintenance information apply to the product supplied. Around 16% of consumers prioritise security and maintenance. |
| Size and ongoing use |
Compare the number of units you need and bear in mind that this equipment is usually left switched on. |
If you’re choosing a complete set-up, you’ll want to know how many units you need and what’s involved in running them continuously. Around 11% of consumers take size and ongoing use into account. |
Common pitfalls
-
Mistaking a high combined AX or BE speed for the speed of a single seminar connection
Your home connection also depends on your internet service, device, distance and placement. The Consumers' Association warns that the Wi-Fi version alone doesn’t determine performance.
Start by checking the connection where you’ll be attending the seminar and the link between the mesh units. Only then compare the Wi-Fi specifications.
-
Choosing a wireless extender when you need Ethernet backhaul
A device without Ethernet ports can’t act as a wired connection point. According to eero, the eero 6+ Extender has no Ethernet ports, unlike the eero 6+ router.
Check that the version and packaging you choose include the ports you need.
-
Installing an extra router without checking its operating mode
Your chosen network set-up determines how mesh works with your existing provider router.
Before installation, check whether router or access point mode is right for your current network, and find out which provider settings you’ll need.
-
Looking only at the number of mesh units
More units will only help if you can place them in suitable locations and the connection between them remains usable. Mesh units are usually left switched on.
Choose the number of units to suit the rooms you want to cover, and check whether your set-up needs cables or additional services.
Brands to compare
TP-Link
The Deco X50 is a dual-band Wi-Fi 6 mesh system available with one, two or three units, so you can choose a set size to suit your home.
- TP-Link says the Deco X50 has three gigabit ports per unit and supports optional Ethernet backhaul.
- The stated coverage depends on the set you choose and doesn’t predict performance in a specific home. The Deco X50 Pro has a different port configuration.
ASUS
The ZenWiFi XD5 is a Wi-Fi 6 mesh system for anyone looking for configurable network features and the option of a wired connection between units.
- ASUS lists Ethernet backhaul, a choice of network name and an access point mode.
- To benefit from Wi-Fi 6 on a laptop, you’ll need a compatible device. Check the set size too: a two-unit pack is not the same version as a three-unit pack.
NETGEAR
The Orbi RBK763S is a tri-band set with one router and two satellites, designed for a set-up where not every unit is connected by cable.
- NETGEAR specifies a dedicated connection for router-to-satellite traffic and seven gigabit ports across the set.
- These are model specifications, not a guarantee that video calls won’t drop out. Performance also depends on placement and your internet connection.
eero
The eero 6+ is a dual-band Wi-Fi 6 system with wireless connections between units and, with compatible versions, the option of Ethernet backhaul.
- eero lists Ethernet backhaul for compatible eero units.
- The eero 6+ router has two gigabit ports. The eero 6+ Extender has no Ethernet ports, so it can’t be used as a wired connection point.
Mesh Wi-Fi products on Joybuy
These mesh sets with two or three units are designed for anyone who wants to use Wi-Fi in several areas of their home. For the version you choose, check the CE marking, the ports you need and whether it will connect to your existing provider equipment.
No image available
TP-Link Deco BE68 (2-pack)
A mesh set with two units for using Wi-Fi in several areas of your home.
Tri-band; three WAN/LAN ports per unit; wired and wireless backhaul.
Joybuy
No image available
TP-Link Deco E4 (3-pack)
A set with three mesh units for anyone who wants Wi-Fi in several rooms and to connect wired devices.
Dual-band Wi-Fi 5 (2,4 GHz/5 GHz); two Ethernet ports per unit, rated at a maximum of 100 Mbps.
Joybuy
No image available
ASUS ZenWiFi BT8 (2-pack)
A mesh set with two units for anyone who wants to set up a network in several areas and needs wired connections.
Tri-band Wi-Fi 7 (2,4 GHz/5 GHz/6 GHz); the product description lists Ethernet ports on the units.
Joybuy
No image available
TP-Link Deco M4 (3-pack)
A set with three mesh units for anyone who wants to extend Wi-Fi coverage to several rooms.
Dual-band Wi-Fi 5 (2,4 GHz/5 GHz); Ethernet ports on the units. The product description says that setup and network management are handled through the Deco app.
Joybuy
No image available
TP-Link Deco X50 (3-pack)
A set with three mesh units for anyone who wants coverage in several areas of their home and is considering a wired connection between units.
Dual-band Wi-Fi 6 (2,4 GHz/5 GHz); three gigabit ports per unit and optional Ethernet backhaul.
Joybuy
Frequently asked questions
How can you tell whether mesh Wi-Fi, rather than your internet connection, is limiting your seminar connection?
Compare the connection where you work with the one next to the main router, or try using a cable. Zoom’s bandwidth recommendations vary depending on video quality and usage, so check both upload and download speeds while several people are online.
Do mesh units need to be connected by cable?
No, the systems covered can connect wirelessly. If you have network cables in place, models such as the Deco X50 and compatible eero units also support Ethernet backhaul. Check which eero version you’re buying: the eero 6+ Extender has no Ethernet ports.
Can you use your own router in the Netherlands instead of your provider’s equipment?
According to the ACM’s consumer information service, you have the right to use your own router, but a provider can refuse a device under certain conditions, for example if it’s unsafe. You may need your provider’s settings to connect it. This doesn’t mean that every mesh set can replace a modem directly.
Which product marking should you check on a mesh set in the Netherlands?
The Netherlands Authority for Digital Infrastructure says that applicable radio equipment must carry the correct CE marking. Check the marking on the product supplied. Since 1 August 2025, applicable strengthened cybersecurity requirements have also applied to wireless equipment placed on the EU market.
What warranty do you have if your mesh system is faulty?
When you buy as a consumer in the Netherlands, you’re entitled to a product that meets reasonable expectations, and the seller is your point of contact for a solution. The Dutch government states that there is no fixed statutory warranty period in the Netherlands; a manufacturer’s warranty may be available in addition.