Home worker with video calls that keep dropping
You mainly want to improve the connection in one regular meeting spot and see whether you can add a Wi-Fi point there.
Choose a plug-in repeater if you want to improve Wi-Fi in one meeting spot, have a compatible FRITZ! network and can find a suitable power socket in the right place. For several work areas, standalone mesh nodes give you more placement options. A PoE node can be mounted on a wall or ceiling, but requires suitable cabling and a power source. None of these setups alone can guarantee an uninterrupted video call.
You mainly want to improve the connection in one regular meeting spot and see whether you can add a Wi-Fi point there.
You may have a suitable power socket or a spot on the wall, but little room for a separate device. Compare the placement options and check what power supply and cabling are required.
You want Wi-Fi in more than one meeting spot and may be able to connect the nodes by cable. So consider the number of nodes, where they can go and whether ethernet backhaul is an option.
A good fit if: you want to improve one spot and already have a compatible FRITZ!Box.
Bear in mind: the position of the power socket partly determines where the device can go.
A good fit if: you want Wi-Fi in several locations and have room for standalone nodes.
Bear in mind: you’ll need space for the nodes and their power supplies; ethernet backhaul may require a cable run.
A good fit if: you have a suitable mounting spot and ethernet cable, and want to keep your shelves clear.
Bear in mind: the TP-Link Deco X50-PoE requires IEEE 802.3at or 802.3bt for PoE; 802.3af is not supported.
| Concern | What to look for | Who should pay particular attention? |
|---|---|---|
| Connection in your meeting spot | Check where the problem occurs and whether a node can maintain a connection to the network in that spot. Also consider whether you can run a cable for ethernet backhaul. | If my connection is unreliable mainly at my work area, I want to know whether a node can go there and still reach the network. Around 36% of consumers prioritise connection quality in their meeting spot. |
| Placement without shelf space | Compare the plug-in placement of a FRITZ!Repeater with the mounting options for the Deco X50-PoE. Check which fixings are included with the version you choose. | With little spare shelf space, I want to know whether a power socket or wall spot is practical. Around 29% of consumers prioritise a setup that doesn’t take up shelf space. |
| Connection to your home network | Check whether the repeater supports the features you want from your router. FRITZ! describes FRITZ! Mesh as working with a FRITZ!Box and FRITZ! devices; compatibility with other routers shouldn’t be taken for granted. | If I want to keep my existing router, I want to know in advance which features will work with it. Around 21% of consumers make compatibility with their existing network their top priority. |
| Complete setup and support | Check the number of nodes and the power supply needed for each version. A PoE setup may also require a suitable PoE source and ethernet cable. | If I want to keep costs under control, I want to know in advance what I’ll need for the complete setup. Around 14% of consumers prioritise knowing what the full setup requires. |
Using it as a repeater with another router is not the same as the integration described for FRITZ! Mesh.
Before buying, check which router models support the mesh features you want.
You may need a different network setup or additional compatible equipment.
The TP-Link Deco X50-PoE supports IEEE 802.3at and 802.3bt, but not 802.3af.
Check the PoE standard, power budget, cable route and what’s included in the pack you choose.
Your chosen setup may require a suitable PoE switch or injector and a usable ethernet cable.
Manufacturers’ specifications alone don’t tell you how a video call will perform at your work area.
Consider where the node can go and what kind of connection is available there. Treat stated maximum speeds as specifications, not as a real-world test of your video call.
TP-Link describes the Deco X50 as a mesh system with optional ethernet backhaul. According to the manufacturer, the Deco X50-PoE can be placed on a table, wall or ceiling.
FRITZ! describes the Repeater 1200 AX as a plug-in option for an existing network, with FRITZ! Mesh integration in a compatible FRITZ! network.
ASUS describes the ZenWiFi XD5 as a system with standalone mesh nodes and support for ethernet backhaul.
These multi-node mesh systems are designed for households that want Wi-Fi in different locations. Check how much space, power and any cabling each version requires.
No image available
A two-unit set for extending Wi-Fi to several areas of your home.
The product description lists Wi-Fi 7, Multi-Link Operation and wired or wireless backhaul.
No image available
A three-unit set for Wi-Fi in several locations. Bear in mind the space needed for the units and their power supplies.
Dual-band Wi-Fi 5 (802.11ac), with 2.4 GHz and 5 GHz bands.
No image available
A three-unit mesh set for anyone who wants Wi-Fi in different locations.
Dual-band Wi-Fi 6 (802.11ax); TP-Link describes ethernet backhaul as an option. According to the product description, each unit has three gigabit ports.
No image available
A two-unit set for anyone who wants to mount a mesh node on a wall or ceiling and has the right setup to do so.
Wi-Fi 6 (802.11ax). PoE power requires IEEE 802.3at or 802.3bt; 802.3af is not supported.
No image available
A three-node set for Wi-Fi in several locations. Bear in mind the space and power supply each node needs.
Tri-band Wi-Fi 6E (802.11ax), with 2.4 GHz, 5 GHz and 6 GHz bands. According to the product description, each node has three gigabit ports.
No. A mesh system can help distribute Wi-Fi points around different locations, but product specifications don’t guarantee uninterrupted calls. Check the connection in your work area and where you could place an extra Wi-Fi point.
For power over ethernet, the TP-Link Deco X50-PoE requires a suitable PoE source that meets IEEE 802.3at or 802.3bt; 802.3af is not sufficient. TP-Link also lists a DC adapter as an alternative power source.
According to FRITZ!, the repeater can also work with other common routers. However, the mesh integration FRITZ! describes for FRITZ!Box and FRITZ! devices shouldn’t be assumed to apply to that combination.
No. According to the Dutch government, there is no fixed period for statutory warranty in the Netherlands: a product must do what you could reasonably expect of it. A manufacturer’s warranty is additional; if a product is faulty, the seller must provide a solution under the applicable terms.
Radio equipment must meet the applicable European requirements and carry the required CE marking. According to the Dutch Authority for Digital Infrastructure, tougher European digital security requirements have also applied to almost all wireless devices since 1 August 2025. These general rules don’t confirm that a specific version complies; check the marking and product documentation for the item in question.