Who is this suitable for?

Video caller working beyond the kitchen

If your connection mainly drops out in the room where you have meetings, it’s important to consider where you place your mesh nodes and how well they connect to each other. The Consumentenbond recommends positioning Wi-Fi nodes with as few obstacles between them as possible.

Resident who can’t run a cable

If the connection between mesh nodes has to be wireless, you may need to find a halfway point where the next node can still connect well to the previous one. The Consumentenbond offers advice on placement; Tweakers noted that, in its tests of mesh systems, multiple wireless hops could affect response times.

User with a router supplied by their internet provider

If you want to keep your existing modem-router, check which router manages the network and which features will remain available. TP-Link describes an access point mode for Deco, for example, in which the main router continues to manage the network.

What should you look for in mesh Wi-Fi for video calls?

Start by identifying the cause: mesh can improve Wi-Fi in your workspace, but it won’t fix a problem with your internet connection itself.

Mesh with Ethernet backhaul

Choose this when: there’s an Ethernet cable, or you can run one, between suitable locations on either side of the kitchen.

Bear in mind: the cable route and installation; check that the exact system supports Ethernet backhaul.

Dual-band wireless mesh

Choose this when: you can position a node without a cable where it can still connect well to the previous one.

Bear in mind: obstacles and distance. In a tested Deco X50 system, Tweakers found lower speeds for wireless satellites placed further away; this isn’t a measurement in your home.

Wireless mesh with an additional backhaul radio

Compare this when: you can’t run cables and the connection between nodes placed further apart is important.

Bear in mind: check whether each model actually uses an additional radio for backhaul; it won’t make an unsuitable location work automatically.

Improve your existing Wi-Fi first

Try this when: you can move your router or want to check first that your wired internet connection is working well.

Bear in mind: moving the router may require a longer cable and isn’t practical in every home.

Consideration What to look for when buying Who is this most relevant to?
Video calls in your workspace Compare your wired connection with Wi-Fi in the room where you have meetings, and test it during a call. If I have meetings in the room beyond the kitchen, I mainly want to know whether the connection will remain usable there. Around 36% of consumers prioritise stable video calls.
Connection between mesh nodes Check whether Ethernet backhaul is possible, or where a wireless node can still connect well to the previous one. I want to know whether the nodes can reach each other around the kitchen, even if I can’t run a cable. Around 29% of consumers consider this connection their main priority.
Working with your internet provider’s router Check for access point mode, the main unit’s connection and who provides firmware updates. If I want to keep my provider’s router, I want to know in advance how the network will be managed and which features will remain available. Around 21% of consumers prioritise compatibility with their existing router.
What’s included and which features you need Check how many mesh nodes are included and which features are available in the network mode you choose. I don’t want to choose nodes or features that aren’t right for my home and how I use it. Around 14% of consumers mainly want to work out which system contents and features they need.

Common buying mistakes

  • Putting an extra node just beyond the kitchen without testing the connection

    The new node still needs a usable connection to the previous one; otherwise, the obstacle between the nodes may continue to affect the signal.

    First, identify possible halfway points and check the connection in those locations. Compare wireless placement with Ethernet backhaul if you can run a cable.

  • Assuming the highest advertised Wi-Fi speed means stable video calls

    The connection in your workspace also depends on the route between the mesh nodes, where they’re placed and your internet connection.

    Test the connection where you have meetings and compare the Wi-Fi there with a wired test close to the point where your internet enters the home.

  • Waiting until after installation to check the router mode

    According to TP-Link, some advanced features aren’t available in access point mode on Deco systems.

    Decide in advance whether your existing provider’s router or the mesh system will manage the network, and check which features are available with that choice.

Brands to compare

TP-Link

The Deco X50 range is worth considering if ease of installation and the choice between wireless and wired connections between nodes are important to you.

  • TP-Link lists three gigabit ports per X50 and an installation app.
  • Tweakers found the tested X50 system easy to set up, but noted limitations with wireless satellites placed further away. This test result doesn’t indicate how the system will perform in your home.

ASUS

The ZenWiFi XD5 is worth comparing if Ethernet backhaul or separate Wi-Fi network names are relevant to you.

  • ASUS describes Ethernet backhaul for situations where network sockets are available.
  • ASUS notes that 160 MHz on 5 GHz may be restricted in some regions. An independent comparison from 2024 covered the configuration tested at the time, not every ASUS mesh system.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering if you want to extend an existing FRITZ! mesh network or connect a node via LAN.

  • FRITZ! lists three radio bands and two gigabit LAN ports for this model.
  • Automatic transfer of FRITZ!Box settings applies when used with a FRITZ!Box; don’t assume it will work the same way with another provider’s router.

NETGEAR

The Orbi RBK762 is a useful point of comparison if you’re considering wireless tri-band backhaul.

  • Tweakers described the Orbi RBK762 tested in 2024 as a system with two nodes and three radio bands.
  • The 2024 test doesn’t reflect all current Orbi models or the coverage you’ll get in your home.

Mesh Wi-Fi at Joybuy

These mesh Wi-Fi products are options to compare for a workspace beyond an obstacle. In particular, check where you can place them, how they connect to each other and how they’ll work with your existing router.

TP-Link Deco BE68 mesh Wi-Fi system, 2-pack

TP-Link Deco BE68 (2-pack)

An option to compare if you want to consider both wired and wireless connections between two mesh nodes.

View at Joybuy
TP-Link Deco X50 mesh Wi-Fi system, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6 (802.11ax)

An option to compare if you want to place several nodes around the kitchen and keep Ethernet backhaul in mind.

The product name lists dual-band 2.4 GHz and 5 GHz, and Wi-Fi 6 (802.11ax). TP-Link lists three gigabit ports per X50; check the connections on the exact system you’re considering.

View at Joybuy
Linksys Velop Pro 7 tri-band mesh Wi-Fi, Wi-Fi 7

Linksys Velop Pro 7, tri-band Wi-Fi 7

Worth considering if you’re looking at a tri-band mesh network and want the option to add compatible Linksys mesh devices later.

The product name lists tri-band 2.4 GHz, 5 GHz and 6 GHz, and Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link Deco XE75 tri-band mesh Wi-Fi, Wi-Fi 6E

TP-Link Deco XE75, tri-band Wi-Fi 6E

An option to compare if you’re considering a tri-band mesh system around the kitchen; the connection between nodes will still depend on placement and backhaul.

The product name lists Wi-Fi 6E and the 2.4 GHz, 5 GHz and 6 GHz bands.

View at Joybuy
TP-Link Deco X50-PoE mesh Wi-Fi system, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50-PoE (3-pack), dual-band Wi-Fi 6 (802.11ax)

An option to consider if you want to place three nodes and powering them via a network cable suits your setup; check the connections you’ll need in advance.

The product name lists dual-band 2.4 GHz and 5 GHz, Wi-Fi 6 (802.11ax) and two Ethernet ports.

View at Joybuy

Frequently asked questions

How can you tell whether mesh could improve your video calls?

First, compare your internet connection via an Ethernet cable close to where it enters your home with the Wi-Fi in the room where you have meetings. If the wired connection is repeatedly poor too, investigate your internet connection first. If it’s mainly the Wi-Fi in your workspace that drops out, a different placement or an extra access point are options to consider.

Where should you place a wireless mesh node when the kitchen is in the way?

Don’t automatically place the node where the signal is weakest. Try a halfway point where it can still connect well to the previous node, with as few obstacles as possible, and check the connection during a call.

Can you connect a Deco wirelessly to your existing provider’s router?

Not as a standard wireless repeater: according to TP-Link, the main Deco must be connected to a modem, router or internet cable. A satellite Deco can connect wirelessly to the Deco network. In access point mode, the main router continues to manage the network, but some advanced Deco features aren’t available.

What should you know about Dutch regulations for mesh routers?

According to the Dutch Authority for Digital Infrastructure, radio equipment sold in the Netherlands must meet the applicable European requirements and carry a CE mark. Tighter requirements for wireless equipment have applied since 1 August 2025. Check which requirements apply to the exact model; a CE statement on a shop page is not, by itself, an independent assessment of compliance.