What should you look for when choosing?
First, test your existing connection while both workspaces are in use. Then decide whether to improve your current router, add mesh or connect the nodes with cables.
Improve your existing connection
Choose this if: the connection is already usable at both workspaces, or you’re having problems even close to the router. If possible, test a desktop computer connected directly by Ethernet.
Bear in mind: you may need to change settings or use a cable. This won’t necessarily solve a weak router signal in a more distant workspace.
Add mesh
Choose this if: one workspace is demonstrably outside the router’s good coverage and you can place an extra node somewhere with a reliable connection.
Bear in mind: an extra node uses power and needs a good connection of its own. Ethernet backhaul is an alternative if you can connect the nodes by cable.
| What to consider |
What should you check? |
Who should pay particular attention? |
| Reliable calls |
Test both workspaces while calls are taking place at the same time and, if possible, compare the results with a wired connection. Also check the recommendations for the video-calling service you use. |
I want two calls to remain clear at the same time, and I don’t want to mistake an internet connection problem for a Wi-Fi issue. That’s why around 36% of consumers prioritise reliable calls. |
| Coverage at your workspace |
Find out where your current signal starts to drop and whether an extra node can still connect reliably to the first one from there. |
If my home office is a weak spot, I want to place a node somewhere that still has a good signal. That’s why around 29% of consumers prioritise coverage at their workspace. |
| Modem and ports |
Check how to set the system up behind your modem and how many ports will remain free after connecting the modem, work computer and any backhaul. |
I want to keep my broadband provider’s modem and connect wired devices without unexpected network problems. That’s why around 21% of consumers prioritise compatibility with their existing network. |
| Cost and maintenance |
Compare how many nodes you need, where you’ll need power sockets and how you’ll keep the firmware up to date. |
I don’t want to install nodes I don’t need, and I want to be able to keep installing updates. That’s why around 14% of consumers prioritise cost and maintenance. |
Mesh systems at Joybuy
These products include Wi-Fi 6 and Wi-Fi 7 mesh systems, including two-node sets and a more extensive model. Compare the number of nodes, wired connectivity options and ports with your workspace and existing modem.
No image available
TP-Link Deco BE68 2-Pack
For anyone comparing a two-pack mesh system with wired or wireless backhaul.
Tri-band Wi-Fi 7; three ports per unit; Multi-Link Operation (MLO).
View at Joybuy
No image available
ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7, White
An option to compare if you want to include Wi-Fi 7 and wired backhaul in your decision.
Dual-band (2.4 GHz / 5 GHz); Wi-Fi 7; MLO; two 2.5 Gbit/s Ethernet ports.
View at Joybuy
No image available
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack
A two-node option to compare if you want to extend mesh coverage to a workspace with weak Wi-Fi.
Wi-Fi 6; Ethernet backhaul; gigabit-rated wired connections.
View at Joybuy
No image available
TP-Link Deco X50-PoE (2-Pack)
For anyone comparing a two-node Wi-Fi 6 mesh system with PoE support.
Dual-band (2.4 GHz / 5 GHz); Wi-Fi 6; two Ethernet ports per unit; PoE.
View at Joybuy
No image available
TP-Link Deco X50 (2-pack) Dual-band Wi-Fi 6
A compact two-node option to compare if a workspace is outside the router’s good coverage.
Three gigabit ports per unit; Ethernet backhaul.
View at Joybuy
Frequently asked questions
How can you tell whether you need mesh or a faster broadband plan?
Compare a test at your workspace with one close to the router, ideally using a wired computer too, and test while both workspaces are in use. If the wired connection also falls short of what your video-calling service needs, extending Wi-Fi coverage isn’t the first solution to try. Zoom recommends 2.6 Mbps upload and 1.8 Mbps download per participating device for 720p group video. These figures aren’t universal requirements for other apps or call settings.
Where should you put a second mesh node?
Don’t put a wirelessly connected node in the hardest-to-reach corner: it still needs to connect well to the first node. Use the placement guide if available, and consider a wired connection between the nodes if walls or floors are blocking the wireless signal.
Is a two-year manufacturer’s warranty the same as the statutory warranty in the Netherlands?
No. According to the Dutch government, there’s no fixed term for the statutory warranty in the Netherlands; it depends in part on what you can reasonably expect from the product. If a product is faulty, contact the retailer, even if a separate manufacturer’s warranty has expired.
Do you need a licence for normal Wi-Fi use in the Netherlands?
No. According to the Dutch Authority for Digital Infrastructure, Wi-Fi uses frequencies that don’t require a licence, notification or registration, provided you meet the applicable conditions for licence-exempt use.
What should you check about CE marking on a new mesh system?
Radio equipment placed on the EU market must meet the applicable requirements and carry the required CE marking, according to the Dutch Authority for Digital Infrastructure. Check the marking on the actual device you receive: a brand name or product page doesn’t confirm that an individual item has been checked.