Who is this buying guide for?

Gamer who can run a cable upstairs

You want to connect your gaming setup and improve Wi-Fi on other floors at the same time. Your options are to run a cable to your gaming device or use a wired mesh node. The Consumers' Association and eero Support outline points to consider when extending Wi-Fi and using Ethernet backhaul.

Gamer who can’t run a cable

You don’t have enough coverage upstairs and need to work out where wireless mesh nodes can still reach one another reliably. The Consumers' Association highlights the importance of placing them in suitable locations.

Household looking to extend its existing Wi-Fi

You want coverage across several floors without unnecessarily replacing a network that already works well. The Consumers' Association discusses how many nodes to choose, while FRITZ! describes a repeater as a way to extend an existing network.

What should you look for in upstairs mesh Wi-Fi?

Run a cable upstairs

When: if you can run a cable and a reliable connection to your gaming setup is your priority. Connect your gaming device directly, or use a wired mesh node to provide Wi-Fi as well.

Trade-off: running a cable takes effort. A cable to a mesh node won’t automatically make the final connection to a wirelessly connected console wired.

Wireless mesh across floors

When: if running a cable isn’t practical and you can place the nodes where they can still reach one another reliably.

Trade-off: placement and the connection between nodes remain crucial. A higher quoted Wi-Fi speed doesn’t guarantee lower ping in your home.

Extend an existing FRITZ! network

When: if you already have a suitable FRITZ!Box and want to extend your existing mesh network. FRITZ! says the FRITZ!Repeater 3000 AX can also connect to a FRITZ!Box via LAN.

Trade-off: the repeater is an extension, not a standalone multi-node kit. Check that it’s compatible with your existing equipment and connections.

What to consider What to look for when buying Who is this important for?
Connection to your gaming setup Work out whether a cable can reach your gaming device or the mesh node upstairs. Check that the system supports Ethernet backhaul and find out which ports are available on each unit. If a reliable connection to my gaming setup is my priority, I’ll first look at the cable route and the connection between the mesh nodes. Around 36% of consumers say stability is their main concern when buying.
Coverage across floors Map out which floors need coverage, where you can place the nodes and whether you can add more to the system later. If I want to tackle dead zones on several floors, I’ll look at the number of nodes and choose locations where they can still reach one another. Around 29% of consumers prioritise coverage across floors.
Connection to your router Check the model of your modem-router, whether you need router or access point mode, and whether any FRITZ! extension will work with your existing FRITZ!Box. ASUS lists access point mode for the ZenWiFi XT9. If I want to keep my current network, I’ll check in advance that the new kit is compatible and how to connect it. Around 21% of consumers prioritise compatibility with their existing network.
Features and costs Compare the kit size, ports and Wi-Fi support you need for your own devices. Bear in mind that mesh nodes stay switched on all the time. If I don’t want to pay for features I don’t need, I’ll compare the version with my devices and the coverage I’m looking for. Around 14% of consumers prioritise value for money.

Common mesh Wi-Fi pitfalls

  • Mistaking a LAN port on a satellite for wired backhaul

    You can connect a console to a satellite using a local cable, while the satellite itself still communicates wirelessly with the rest of the network.

    Before you buy, map out both the connection to your gaming device and the connections between the mesh nodes. Check separately whether the kit supports Ethernet backhaul.

  • Putting a mesh node in the room with the weakest signal

    An extra node still needs a usable connection to the rest of the network. A spot where coverage is already weak isn’t necessarily a suitable place for it.

    Plan locations where the nodes can reach one another, then check the connection where you’ll be gaming.

  • Assuming a different Deco X50 version is the same product

    The TP-Link Deco X50 and X50-PoE are different versions. TP-Link lists three gigabit ports per unit for the standard X50, while Joybuy lists two Ethernet ports per unit for the X50-PoE.

    Compare the full model name, kit size, power supply and ports before choosing a version.

    A different power supply, mounting method or port layout may mean you need to make extra changes to your planned installation.

Brands to compare

TP-Link

The Deco range includes mesh kits with Wi-Fi 6 and Wi-Fi 7. Compare the exact version and kit size.

  • TP-Link lists three gigabit ports per unit for the Deco X50 and four 2.5Gbps ports for the Deco BE65 (EU) V1.
  • These port specifications alone don’t tell you anything about ping or upstairs coverage in your home.

ASUS

The ZenWiFi XT9 is a Wi-Fi 6 mesh system worth comparing if access point mode and Ethernet ports are important to you.

  • ASUS lists access point mode, one 2.5G WAN port and three gigabit LAN ports.
  • ASUS warns that 160 MHz on 5 GHz may be restricted in some regions.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering if you want to extend a compatible existing FRITZ! mesh network.

  • FRITZ! lists three radio bands and two gigabit LAN ports. According to the manufacturer, the repeater can also connect to a FRITZ!Box via LAN.
  • This isn’t a standalone multi-node kit, so check that it’s compatible with your existing FRITZ!Box.

eero

eero is a brand to look into if you want to compare Ethernet backhaul over existing cabling.

  • eero Support describes Ethernet backhaul as an option and recommends using existing Ethernet cabling when available.
  • This general information doesn’t confirm the ports or features of any specific model, so check the version you’re considering.

Joybuy products for upstairs mesh Wi-Fi

These product options focus on mesh kits and extensions for an upstairs gaming setup. Compare support for wired backhaul, kit size and compatibility with your existing router. For the exact model, also check the CE marking: according to the Dutch Authority for Digital Infrastructure, only products with CE marking may be sold in Europe.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

A good option to compare if you’re looking for a mesh kit with wired and wireless backhaul and ports on the units. The product name specifies Wi-Fi 7 and a two-pack; the description lists 10, 2.5 and 1 Gbps ports per unit. Check the Dutch terms of use for this 6 GHz version.

Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

An option to compare if you’re considering three mesh nodes and Ethernet backhaul. The product name specifies dual-band Wi-Fi 6, while the product description lists optional Ethernet backhaul and three gigabit ports per unit. Check where you can place the nodes and how the kit connects to your existing router.

Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

A good option to compare if you’re looking for a Wi-Fi 7 mesh router that can form a network with multiple units. Check how many units you’ll need for the floors you want to cover and whether control via the Huawei app suits the way you use your network.

Joybuy
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

An option to compare if you’re considering a dual-band Wi-Fi 6 mesh router with a single network name. Check how many units you’ll need for your home and how the kit will work with your current router and planned placement.

Joybuy
TP-Link Deco X50-PoE 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50-PoE 2-pack, dual-band Wi-Fi 6

A good option to compare if you’re looking for a two-unit Wi-Fi 6 mesh kit with PoE support. The product description lists two Ethernet ports per unit. Check that the power supply and mounting method suit your planned installation.

Joybuy

Frequently asked questions

How many Wi-Fi nodes do I need for a three-storey home?

It depends on your home and where you place the nodes. The Consumers' Association suggests three nodes as a guide for a three-storey home, but also notes that two are enough for most homes and that you can add more later. Check the coverage where you want to game.

Is my console fully wired if it’s connected by cable to a wireless mesh satellite?

No. The cable connects the console to the satellite locally, but the satellite may still connect wirelessly to the rest of the network. Ethernet backhaul also requires a cable between the network nodes.

What should I check during installation and maintenance?

First, check where you’ll place the nodes and how the system connects to your existing router. Keep the firmware on your chosen equipment up to date, and remember that mesh nodes stay switched on all the time when comparing energy use.

Who should I contact about a faulty mesh product in the Netherlands?

Report the fault to the seller. The Dutch Government explains that there is no fixed statutory warranty period in the Netherlands: what you could reasonably expect from the product and the cause of the fault are both relevant. A manufacturer's warranty is in addition to your statutory rights.

What product regulations apply to mesh Wi-Fi sold in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, radio equipment sold in Europe must meet the relevant requirements and carry a CE marking. Check the marking and version of the exact product; the brand or model name alone doesn’t confirm this.