Who is this guide for?

Gamers who want a stable connection upstairs

Your main concern is the connection to your gaming setup. You may be able to run a cable between floors or connect a device upstairs to a mesh point.

Tenants without a practical cable route

You want to improve coverage upstairs with points you can move, and work out whether a wireless or powerline connection will work in your home.

People in a small home with an existing router

You want to know whether two points will be enough and whether a new system can work with your current router, without buying more points than you need.

What should you look for when choosing?

Start with the connection between downstairs and upstairs, then work out how many points and ports you actually need.

What to consider What to look for Who is this important for?
Stability for your gaming setup Check that both mesh points support Ethernet backhaul and that you’ll have a free Ethernet port upstairs for your PC or console. If I game upstairs, I want to know whether the connection between floors can be wired and whether I can also connect my device by cable. Around 36% of consumers put this kind of stability first.
Coverage without a cable route Consider where you can place the points. Try powerline only if it’s suitable for your home’s electrical wiring. If running a cable through my rented home isn’t practical, I’m looking for an alternative that can provide coverage upstairs without major alterations. Around 29% of consumers prioritise coverage without a cable route.
The right system size Start with the layout of your floors and compare the number of points. Don’t base your decision on the advertised coverage alone. In a compact home, I don’t want to buy more points than I need for the places where I use Wi-Fi. Around 21% of consumers consider choosing the right system size most important.
Connecting to your existing router Check whether the system supports access point mode, which router will manage the network and whether your existing mesh points are compatible. If I want to keep using my current router, I want to know in advance how the new system will be set up and which features will remain available. Around 14% of consumers prioritise easy integration with their existing router.

Common buying mistakes

  • Wiring only the console upstairs and assuming the whole connection is wired

    A cable from the console to the mesh point only wires that final section. Without Ethernet backhaul, the point upstairs may still communicate with the point downstairs wirelessly.

    Check the connection between the console and the point separately from the backhaul between the mesh points.

  • Choosing a large system based on its advertised coverage

    The number of points alone doesn’t predict coverage in your home. The Dutch Consumers’ Association recommends starting with two points for two floors, but the layout and placement still matter.

    Start with the floors and possible locations, then decide whether you need to expand the system.

    An extra point may be unnecessary and will also use more electricity.

  • Assuming a powerline specification guarantees performance upstairs

    TP-Link describes G.hn powerline as a way to connect Deco points, but this doesn’t tell you how well it will perform over your home’s electrical wiring.

    Consider powerline as an alternative when running a cable isn’t practical, then assess the connection in your home.

  • Assuming an existing router or product listing is automatically compatible

    Access point mode can change which features are available. A product page may also give conflicting information about ports. For example, the PX50 listing gives different figures in different places: one and three Ethernet ports per device.

    Check the network mode and port layout of the version you’re choosing before relying on them.

Relevant brands

TP-Link

The Deco X50 and Deco PX50 offer two different ways to connect a mesh system: Ethernet backhaul or a connection between points using G.hn powerline.

  • TP-Link lists three gigabit ports per point for the Deco X50.
  • The manufacturer’s specifications don’t prove how well the system will perform for gaming in your home. The port information on the PX50 product page is contradictory, so check the version if the number of ports matters to you.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh product range. ASUS offers a two-piece version and says it supports Ethernet backhaul.

  • ASUS describes wired connections between points and offers systems in different sizes.
  • Check that you’ll have a free Ethernet port on the point upstairs for your gaming device. Stated coverage isn’t a measurement of performance in your home.

FRITZ!

The FRITZ!Mesh Set 1700 is described as a two-piece system that can be used with an existing router.

  • FRITZ! says it can connect to a FRITZ!Box, another router or directly to a fibre modem/ONT.
  • Product claims about Wi-Fi 7 and low latency don’t prove that ping will be lower in your particular home. Check the connections on the version you’re choosing.

Mesh products at Joybuy

This selection includes mesh systems for an upstairs gaming setup, with two-point systems and a TP-Link Deco X50 system with three points. For each specific device, also check for the CE mark. The Dutch Authority for Digital Infrastructure states that radio equipment sold on the European market must meet the applicable requirements and carry a CE mark.

TP-Link Deco BE68, 2-pack

TP-Link Deco BE68, 2-pack

This two-piece mesh system is an option if you want to place a mesh point upstairs and connect a device to it by cable.

The product description lists tri-band Wi-Fi 7, wired and wireless backhaul, and multiple WAN/LAN Ethernet ports per point.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6, 2-pack

This two-point system could suit you if you’re looking for mesh with Ethernet backhaul between the points.

The product description lists Wi-Fi 6 and Ethernet backhaul.

View at Joybuy
TP-Link Deco X50-PoE, 2-pack

TP-Link Deco X50-PoE, 2-pack

This two-piece system is an option if you want to place mesh points across two floors.

The product description lists PoE support and two Ethernet ports per point.

View at Joybuy
TP-Link Deco X50, 2-pack

TP-Link Deco X50, 2-pack

This two-point system could suit you if you want to put a mesh point upstairs and possibly connect a PC or console to it by cable.

The product description lists dual-band Wi-Fi 6 (802.11ax), Ethernet backhaul and three gigabit ports per point.

View at Joybuy
TP-Link Deco X50, 3-pack

TP-Link Deco X50, 3-pack

This version includes three points. Compare this with your home’s layout before choosing a larger system.

The product description lists dual-band Wi-Fi 6 (802.11ax), Ethernet backhaul and three gigabit ports per point.

View at Joybuy

Frequently asked questions

How many mesh points should I consider for two floors?

The Dutch Consumers’ Association recommends starting with two points for two floors. Your home’s layout and obstacles will also affect whether that’s enough; only consider adding more if you need better coverage.

Will a cable from my console to the point upstairs make the whole connection wired?

No. That cable only connects the console to the point upstairs. For Ethernet backhaul, the connection between the mesh points must also run over a cable. Check which type of backhaul is active.

Can I use mesh while keeping my existing router as the main router?

Yes, if the system supports access point mode. TP-Link says that some advanced features won’t be available in the Deco app in this mode. Check how to set up the model you’re considering.

Will powerline mesh work in every home?

Performance depends on your home’s electrical wiring. TP-Link describes G.hn powerline for communication between Deco points, but check the connection in your home before assuming this option will suit you.

Can I run a cable or drill holes in a rented home?

According to the Dutch government, you don’t need permission for minor changes that can be undone without much expense, such as filling small drill holes; renovations do require permission. Check the specific cable route and alteration before carrying out any work.