Student with a desk upstairs
If you study upstairs, you’ll want to know whether an extra mesh node or a cable can bring the connection to your desk. Consumentenbond recommends placing Wi-Fi extenders where you want to boost the signal.
Start by looking at the connection between downstairs and your desk upstairs. If you have a suitable Ethernet cable, mesh with Ethernet backhaul could be a good option; without a cable, the placement of the nodes and the wireless connection between them are key. Then compare the number of nodes, the ports you need and how the system works with your existing router. Consumentenbond and TP-Link Netherlands point out that advertised coverage and speeds don’t measure the connection at your desk.
If you study upstairs, you’ll want to know whether an extra mesh node or a cable can bring the connection to your desk. Consumentenbond recommends placing Wi-Fi extenders where you want to boost the signal.
If your housemates are online while you study, compare the connection in different places and with several devices, rather than looking only at the advertised top speed. Consumentenbond includes speed and ease of use among its test criteria for Wi-Fi extenders.
If you want to keep your current modem or router, check that the system supports the connection type and access point mode you need, as well as any wired connection. ACM ConsuWijzer explains that you can use your own router, subject to connection and security requirements.
First, decide whether you can connect the nodes using Ethernet. Then compare their placement, the size of the set and how it connects to your existing router.
| What to consider | What to look for | Who should prioritise it |
|---|---|---|
| Coverage upstairs | Decide where the router, desk and any additional nodes will go. Don’t treat advertised coverage as a guarantee for every floor. | If I study upstairs, I want to know whether a node there will still have a good connection to the network. Around 36% of consumers would prioritise coverage at an upstairs desk. |
| Using multiple devices at once | Compare speed and coverage reviews where available, and check which Wi-Fi versions your devices support. | If other people are online while I study, I want to take the connection in several places into account. Around 29% of consumers would be most concerned about multiple people using the network at once. |
| Cabling and ports | Check whether there’s an Ethernet cable running upstairs and count how many ports will remain free after connecting the modem and backhaul. | If I can run a cable upstairs, I want to know which connection and mode my setup needs. Around 21% of consumers would prioritise cabling and connections. |
| Cost and management | Check whether you want to keep your existing router, and compare the number of nodes you need and how updates are provided. | If I want to keep my current router, I don’t want to choose an extender that won’t work with my network setup. Around 14% of consumers would be most concerned about management and avoiding unnecessary equipment. |
The placement of the nodes and the connection between them both affect the coverage you get in a particular spot. A product specification isn’t a measurement taken in your home.
Before choosing, map out where your desk is and where the mesh nodes could go. Check the connection after installation.
If your chosen setup isn’t suitable, you may need an extra node or a different cable route.
The number of ports can vary between models and between the router and an extension node. This means there may not be a spare connection for a computer upstairs.
Count the ports on each individual node, including those used for the modem and any backhaul.
If there aren’t enough ports, you may need a different setup or an additional network connection.
A set with two nodes isn’t the same as one with three. Google also says that Nest Wifi Pro can’t be combined in a single mesh network with older Nest Wifi or Google Wifi nodes.
Check the full model name, generation and number of nodes included in the box before comparing.
The Deco X50 range includes mesh sets with two or three nodes. TP-Link lists three gigabit ports per node and optional Ethernet backhaul.
The FRITZ!Repeater 3000 AX is worth considering if you want to extend an existing FRITZ! mesh network.
ZenWiFi BD4 is a Wi-Fi 7 AiMesh system. The Dutch specifications list two 2.5G WAN/LAN ports per node.
Google describes Nest Wifi Pro as an expandable Wi-Fi 6E mesh system that can be used with an existing Wi-Fi modem.
Velop Micro 6 is a dual-band Wi-Fi 6 mesh range with a separate router and smaller extension nodes.
This Joybuy selection includes Deco and ZenWiFi mesh sets with two or three nodes. Compare the set size and Wi-Fi generation in the product name with your setup upstairs.
No image available
An option to compare if you’re looking for a two-node mesh setup to connect downstairs and upstairs.
Set size: 2-pack.
No image available
An option to compare if you need a three-node mesh setup.
Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 5 (802.11ac).
No image available
An option to compare if you’re considering a two-node mesh setup.
Tri-band: 2.4 GHz, 5 GHz and 6 GHz. Wi-Fi 7 (802.11be).
No image available
An option to compare if you’re looking for a three-node mesh setup.
Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 5 (802.11ac).
No image available
An option to compare if you want to spread three nodes across different areas of your home.
Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 6 (802.11ax).
Not necessarily. If the connection is wireless, the node also needs to stay connected to the rest of the network. Check the connection after placing it. If you have a suitable cable running upstairs, you can connect a node by cable according to the instructions for the mode you’ve chosen.
Yes, with a suitable setup. Check the connections and whether the set you’ve chosen has an appropriate access point mode. If you want to connect your own router directly to your provider’s network, ACM ConsuWijzer explains that you can do so in the Netherlands, subject to connection and security requirements.
Keep your network equipment up to date and check how the manufacturer provides updates for your chosen model. ACM ConsuWijzer highlights the importance of security updates for your own network equipment.
No. According to ACM ConsuWijzer, Dutch law doesn’t set a fixed two-year period for the legal guarantee. It depends on what you could reasonably expect from the product. If something goes wrong, contact the seller first.