Who might benefit from mesh Wi-Fi upstairs?

Seminar attendees with weak Wi-Fi upstairs

Your connection works better downstairs than at your upstairs desk, and you want to be seen and heard during a call. The Consumers’ Association (Consumentenbond) points out that walls and ceilings can interfere with the Wi-Fi signal.

Home workers with a network cable upstairs

You can connect an upstairs mesh point by cable and want to check whether your computer can also use an Ethernet connection. TP-Link describes Ethernet backhaul for Deco; check the capabilities of the system you choose.

Users who want to keep their provider’s modem

You want to extend your Wi-Fi without automatically taking over the router function of your existing modem. Check which operating mode and set-up options are suitable for your combination of devices.

What should you look for when choosing?

Start by checking the connection where your desk is. Then decide whether to connect the mesh points wirelessly or run a cable, and check the router mode and ports you’ll need.

What to consider What to look for when buying Who is this important for?
Coverage at your desk Consider where the main unit and additional points can go. Test the connection at your desk rather than relying solely on the stated coverage. If you work upstairs and need a stable connection there, you’ll want to know whether the positioning will work in your home. Around 36% of consumers put upstairs coverage first.
Call stability Test a call with your camera on and screen sharing at your desk. Also check your internet connection and the requirements of the meeting service you use. If you speak or present during a seminar, you’ll want the picture and sound to remain usable in that spot. Around 29% of consumers give call stability top priority.
Cable and Ethernet ports Check whether the system supports Ethernet backhaul, and count how many ports will remain free after you’ve connected the cables. If you already have a network cable upstairs, or want to use one, a wired connection between mesh points may be relevant. Around 21% of consumers start by considering whether they can use a cable.
Existing router Check the access point or extender mode, set-up instructions and which features are available in that mode. If your modem needs to keep managing the network functions, you’ll want to know how the mesh system works with it. Around 14% of consumers prioritise keeping their existing router.

Common buying mistakes

  • Assuming the stated coverage guarantees Wi-Fi at your desk

    Distance, walls and ceilings can affect the signal in your home. So the stated range won’t necessarily tell you how well the connection will work upstairs.

    Consider the possible positions and test the connection at your desk, even if the stated range seems generous.

  • Assuming wireless mesh is the same as Ethernet backhaul

    With wireless mesh, the connection between points depends on the radio signal. Ethernet backhaul uses a cable instead.

    Choose based on the cable route available, and check which type of backhaul is actually active after installation.

    Running a cable upstairs may involve extra work.

  • Counting every port as a free port for your computer

    A port may already be needed to connect to the router or another mesh point.

    Before you buy, plan which cables you’ll connect to each unit and check how many ports will be left for other devices.

  • Confusing the manufacturer’s warranty with your full statutory rights

    According to the Dutch government, there is no fixed statutory warranty period in the Netherlands. A manufacturer’s warranty is not automatically the same as your statutory rights.

    Keep your proof of purchase and contact the seller if a product is faulty. Consider any additional manufacturer’s warranty separately.

Brands to compare

TP-Link

Deco is a mesh range for anyone looking for a standalone system or wanting to see how a mesh set-up can work with an existing router.

  • According to the Dutch product specifications, the Deco X50 has three gigabit ports. TP-Link describes Ethernet backhaul and an access point mode for Deco.
  • Available connections depend on the operating mode. The X50’s specifications don’t predict how the connection will perform at your upstairs desk.

FRITZ!

The FRITZ!Mesh Set 1700 is an expansion set with three FRITZ!Repeaters 1700, for anyone wanting to compare systems with several placement points.

  • FRITZ! lists mesh, Wi-Fi 7 and connection to an existing router or modem as product features.
  • The manufacturer’s product information can’t determine the coverage or call quality you’ll get in a particular home.

ASUS

ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh range for anyone wanting to compare ports and operating modes too.

  • The official specifications list two 2.5G WAN/LAN ports and an access point mode.
  • Variants with different numbers of units are available. Check the exact pack; Wi-Fi 7 alone doesn’t prove that a seminar call will run better.

KPN

SuperWifi 2 may be worth considering as an extension to an existing home network.

  • A response from a KPN moderator on KPN Community confirms that SuperWifi can be used with a router from another manufacturer or provider.
  • For this type of set-up, don’t assume you’ll get the same automatic installation and management experience as with a KPN modem without checking first.

Linksys

Velop Micro 6 is a dual-band Wi-Fi 6 mesh option for comparing features such as the positioning of compact points.

  • Linksys mentions automatic firmware updates and describes the system’s ports.
  • Linksys claims about coverage or uninterrupted video calls are no independent guarantee of performance on an upper floor.

Mesh products at Joybuy

These mesh systems are designed to extend Wi-Fi to several areas of your home. Compare the number of units and Wi-Fi specification with your cable route, router set-up and connection needs.

TP-Link Deco E4 mesh system with three units

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

This three-unit system is designed to extend Wi-Fi to several areas of your home.

Dual-band Wi-Fi 5 (802.11ac). Check how many ports will remain available for your computer after connecting the mesh points.

View at Joybuy
ASUS ZenWiFi BT8 tri-band Wi-Fi 7 mesh system

ASUS ZenWiFi BT8, tri-band Wi-Fi 7

A mesh option to compare if you’re looking for a tri-band system for home Wi-Fi.

Tri-band (2.4 GHz, 5 GHz and 6 GHz); Wi-Fi 7 (802.11be). Check the connection options and whether the system will work with your existing router.

View at Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7 mesh system

ASUS ZenWiFi BD4, dual-band Wi-Fi 7

A mesh option to compare if you’re considering dual-band Wi-Fi 7 and expansion options.

Dual-band (2.4 GHz and 5 GHz); Wi-Fi 7 (802.11be). Check the exact variant and the connection options for a possible wired link between points.

View at Joybuy
TP-Link AX1800 mesh Wi-Fi system, two-pack

TP-Link AX1800 mesh Wi-Fi system (2-pack), Wi-Fi 6

A two-unit system for extending Wi-Fi to several areas of your home.

Wi-Fi 6. If you want to connect the mesh points with a network cable, check that this exact system supports wired backhaul.

View at Joybuy
TP-Link Deco M4 dual-band mesh system with three units

TP-Link Deco M4 (3-pack), dual-band Wi-Fi 5

This three-unit system is designed to extend Wi-Fi to several areas of your home.

Dual-band Wi-Fi 5 (802.11ac). Check how many ports will remain available on each unit after connecting the mesh links.

View at Joybuy

Frequently asked questions

Should you buy a mesh system straight away if your seminar call keeps cutting out upstairs?

Not necessarily. First check your router’s position and the connection at your desk. The Consumers’ Association (Consumentenbond) says that distance, walls and ceilings can interfere with the Wi-Fi signal.

Can a mesh system work alongside your existing modem?

That depends on the system and the operating mode you choose. TP-Link describes an access point mode for Deco in which the existing router continues to manage the network functions. Check the instructions for the exact model before connecting the cables.

How can you check whether the cable between two mesh points is being used?

According to TP-Link, after installation you can use the Deco app to check whether Ethernet backhaul is active at the satellite point. For other brands, follow their own instructions.

Does Wi-Fi 7 automatically mean better video during a Zoom seminar?

No. For a 720p HD group call on Zoom, Zoom specifies 2.6 Mbps upload and 1.8 Mbps download. These bandwidth requirements apply to the stated Zoom setting; they aren’t requirements for every seminar call or mesh system.

What protection do you have if your mesh system turns out to be faulty?

The Dutch government says you’re entitled to a product that works properly in the Netherlands, and that there’s no fixed statutory warranty period. Depending on the circumstances, you may be entitled to a free repair, replacement or refund. Discuss the fault with the seller.