Who is this choice relevant to?

Designer with a weak connection in their workspace

Works on design files in a room beyond the hallway and wants to find out whether the Wi-Fi there, or the internet connection itself, is limiting upload speed. The Dutch Consumers’ Association recommends a wired speed test to assess the connection without Wi-Fi as an intermediary.

Resident who can run an ethernet cable

Wants to connect an access point closer to their workspace and avoid relying on the Wi-Fi signal through the hallway for the connection between mesh nodes. TP-Link describes ethernet backhaul as a way to connect Deco nodes using a network cable.

Resident without a cable route

May need an extra Wi-Fi node, but will need to consider the signal strength where it’s placed. TP-Link recommends trying different positions.

What should you look for in mesh Wi-Fi?

First, measure upload speed using a cable at your router, then compare it with the result at your workspace. If Wi-Fi is the problem, check whether ethernet backhaul is possible. If not, the position of the wireless node will determine the connection between the mesh nodes.

According to the Dutch Authority for Digital Infrastructure (RDI), radio equipment sold in the Netherlands must carry a CE marking. Check the marking on the specific version you intend to buy.

What to consider What should you check? Who is this important for?
Coverage and positioning Look at possible positions for the extra node and test the connection there; if using wireless backhaul, try different positions if needed. If I work in a room beyond the hallway, I want to know whether an extra node will still have a usable connection there. This is the top priority for around 36% of consumers.
Upload speed from your internet connection Compare a wired upload speed test at your router with one at your workspace; check your internet connection if wired upload speed is already limited. When working with large design files, I want to rule out the internet connection itself as the cause of slow uploads first. Upload speed from the internet connection is the top priority for around 29% of consumers.
Wireless connection Check whether the version you’ve chosen supports wireless backhaul and test whether the extra node can still connect to the main node from the intended position. Without a cable route, I want to be able to place a node somewhere it can still connect to the main node. The freedom to position nodes wirelessly is the top priority for around 21% of consumers.
Connection to your existing router Check which router or access point mode the mesh system requires and whether it’s compatible with your existing router. If I want to keep using my current router, I want to know in advance which mode and connection will work. Around 14% of consumers put integration with their existing router first.

Common buying mistakes

  • Confusing faster Wi-Fi with faster internet uploads

    Your internet connection can limit upload speed, even if Wi-Fi works well close to your router. Mesh won’t increase the capacity of your internet connection.

    Before buying, run a wired speed test at your router and compare the result with one at your workspace.

  • Placing a wireless node where the Wi-Fi signal is already almost gone

    The extra node also needs a usable connection to the main node. Walls and the layout of your home affect signal strength.

    Try different positions where the node itself still has a connection; consider ethernet backhaul if you can run a cable.

  • Assuming every mesh system works the same way with a provider-supplied router

    Router and bridge mode settings vary between systems. Google, for example, says that the main node in a mesh network with multiple devices can’t be set to bridge mode.

    Check the instructions for the exact model and the settings on your existing router before choosing a system.

Brands to compare

TP-Link

The Deco X50 and Deco XE75 Pro are mesh product ranges to consider if you’re looking to set up a new Deco network.

  • TP-Link explains ethernet backhaul and offers help with positioning Deco nodes.
  • Product speeds and stated coverage don’t tell you how Wi-Fi will perform in a particular narrow hallway; also check the set you’ve chosen and how many nodes it includes.

ASUS

ZenWiFi AX (XT8) is worth considering if you want the option to configure a separate wireless backhaul.

  • ASUS says the second 5GHz band can be configured as a dedicated backhaul.
  • This product specification doesn’t predict how the connection will perform in your home; check the exact version and where you plan to place it.

FRITZ!

FRITZ!Repeater 3000 AX can extend an existing compatible FRITZ! network.

  • FRITZ! describes connection via LAN.
  • For the mesh integration described, FRITZ! specifies a FRITZ!Box with FRITZ!OS 7 or later. A repeater isn’t necessarily the same as a new router-and-satellite system.

Google

Nest Wifi Pro is a mesh alternative that lets you connect nodes via ethernet.

  • Google provides instructions for a wired connection between Wi-Fi nodes.
  • Google says that the main node in a mesh network with multiple devices can’t be set to bridge mode, so check how the system will work with your provider-supplied router.

Mesh products at Joybuy

This selection at Joybuy includes mesh systems and a mesh node for Wi-Fi around your workspace. Check that the number of nodes and the connection you want between them are suitable for your home and existing equipment.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

A set of two for a mesh setup; the product name specifies Wi-Fi 7 and tri-band.

View at Joybuy
TP-Link Deco E4 mesh system, 3-pack

TP-Link Deco E4 (3-pack)

A set of three for anyone looking to place multiple nodes; the product name specifies dual-band Wi-Fi 5 and 2.4 GHz and 5 GHz bands.

View at Joybuy
ASUS ZenWiFi BT8 mesh system, 2-pack

ASUS ZenWiFi BT8 (2-pack)

A set of two mesh units; the product name specifies tri-band Wi-Fi 7 with 2.4 GHz, 5 GHz and 6 GHz bands.

View at Joybuy
TP-Link Deco M4 mesh system, 3-pack

TP-Link Deco M4 (3-pack)

A set of three mesh nodes; the product name specifies dual-band Wi-Fi 5 and 2.4 GHz and 5 GHz bands.

View at Joybuy
ASUS ZenWiFi BD4 mesh node

ASUS ZenWiFi BD4

The product name specifies dual-band Wi-Fi 7. One mesh node is included; you’ll need additional compatible equipment for a setup with multiple nodes.

View at Joybuy

Frequently asked questions

How can you tell whether mesh Wi-Fi could improve your slow upload speed?

Compare a wired upload speed test at your router with one at your workspace. The Dutch Consumers’ Association recommends connecting a computer to your home network with a network cable for a speed test. If upload speed is still slow over a wired connection, investigate your internet connection first. If the Wi-Fi signal is particularly weak at your workspace, look at coverage and backhaul.

Where should you place an extra mesh node in a narrow hallway?

Place a wireless node somewhere it can still connect to the main node, and try different positions if needed. If you can run a network cable, the nodes can connect via ethernet.

Can you use your own mesh router with a Dutch internet provider?

According to the Netherlands Authority for Consumers and Markets’ ConsuWijzer service, you have the right to choose your own router, although a provider may refuse to allow certain equipment, for example if it’s unsafe. Ask your provider for the connection settings you need if you want to connect your own router directly. If you’re using it behind the provider’s router, check the settings on both devices too.

Which safety requirement should you check for mesh Wi-Fi?

According to the Dutch Authority for Digital Infrastructure, radio equipment sold in the Netherlands must carry a CE marking. Check the marking on the specific version being offered; the general product name doesn’t tell you whether that particular version carries the marking.