Designer dealing with interrupted uploads
You send design files from a workstation where Wi-Fi may be the bottleneck. First, work out whether the issue is your internet connection or your wireless connection.
First, use an Ethernet cable at the connection point to check whether your internet connection is limiting your upload speed. Mesh Wi-Fi can’t make a slow internet connection faster. If Wi-Fi at your workstation is the weak link, choose the number and position of your nodes based on the areas you want to cover. A compact freestanding node needs shelf space, while a mountable PoE node requires suitable cabling and power. Before buying, check the dimensions, exact version and the power supply that’s compatible with it.
You send design files from a workstation where Wi-Fi may be the bottleneck. First, work out whether the issue is your internet connection or your wireless connection.
You want to position Wi-Fi nodes without taking up too much space on your desk or shelves, so you compare their dimensions with your mounting and power options.
You use devices in more than one place and want to work out how many Wi-Fi nodes you need and whether you can connect them by cable.
Choose this when: you have a small, clear space and don’t want to arrange mounting or PoE power. ASUS lists the dimensions of the ZenWiFi XD5 as 90 × 90 × 85 mm per unit.
Trade-off: each unit needs space and power; wired backhaul requires Ethernet connections between the nodes.
Choose this when: you want to keep your shelves clear and can arrange the mounting and cabling. TP-Link describes the Deco X50-PoE as suitable for wall or ceiling mounting.
Trade-off: for power over Ethernet, this model supports IEEE 802.3at or 802.3bt, but not 802.3af. Also check which power supply and accessories are included with the version you choose.
Choose this when: you have space for the units and may be able to connect the nodes using Ethernet. TP-Link lists wireless connections and optional Ethernet backhaul for the Deco X50.
Trade-off: an extra node takes up space and needs power; advertised Wi-Fi speeds don’t guarantee the upload speed of your internet connection.
| What to consider | What to look for | Who is this important for? |
|---|---|---|
| Upload connection | Compare your package with a measurement taken using an Ethernet cable at the connection point; then assess Wi-Fi at your workstation. | When I send design files, I want to know whether my internet connection or Wi-Fi is limiting the upload. Around 36% of consumers rank a reliable upload connection as their top priority. |
| Shelf space | Measure the space, allowing room for cables; check the dimensions, mounting options and available power supply. | I don’t want to clutter my workstation, so I check whether a node will fit or can be mounted. Around 29% of consumers prioritise keeping their shelves clear. |
| Coverage and number of nodes | Identify weak spots and check whether the nodes can be connected to each other by cable. | When I work in several places, I want suitable coverage without buying a node that has nowhere suitable to go. Around 21% of consumers prioritise coverage in the work areas they need. |
| Installation and connection | Check what’s included in the set, what PoE equipment is required and whether it connects to your existing modem or router. | I want to know in advance what power supply and connections the setup needs. Around 14% of consumers prioritise easy installation and clear requirements. |
Your internet connection speed and Wi-Fi speed are two different things. ACM ConsuWijzer recommends measuring your connection with an Ethernet cable close to the connection point.
Compare that measurement with your package, then assess the connection at your workstation.
According to TP-Link, the TP-Link Deco X50-PoE supports IEEE 802.3at and 802.3bt, but not 802.3af.
Check your equipment’s PoE standard and power budget; TP-Link lists a DC adapter as an alternative.
Powering the node via PoE may require a compatible switch or injector, as well as cabling.
The number of nodes you need depends on the areas you want to cover. The Consumentenbond suggests one node for a studio, for example, and two for several rooms or floors as a guide—not a guarantee for every home.
First work out where the connection is weak and where a node can go; then choose the number of units.
The Consumentenbond warns that hardware versions of the TP-Link Deco X50-PoE may differ in software and support.
Compare the hardware version and what’s included in the exact set you’re considering.
The Deco X50 and Deco X50-PoE are different models designed for different placement needs. TP-Link lists Ethernet backhaul and three gigabit ports per unit for the X50; the X50-PoE is designed for mounting and PoE.
ASUS lists the ZenWiFi XD5 as measuring 90 × 90 × 85 mm per unit and supporting Ethernet backhaul. Compare the dimensions with the space available and check whether wired connections are possible.
FRITZ! says the Mesh Set 2700 can be used with an existing router or modem. The set is available with different numbers of nodes.
For the Orbi RBK763S, NETGEAR lists a dedicated connection for router-to-satellite communication and seven gigabit ports across the set.
These mesh Wi-Fi systems selected from Joybuy each include two units for use in multiple areas. Check the connections and placement options for each version.
No image available
A good fit if you want to use two mesh units and connect devices by cable too.
Wi-Fi 7; each unit is listed with 10, 2.5 and 1 Gbps ports. The set contains two units.
No image available
A two-unit set for anyone who wants Wi-Fi in several areas and wants to connect devices by cable.
Wi-Fi 7 with tri-band on 2.4, 5 and 6 GHz. Each unit is listed with 1 and 2.5 Gbps Ethernet ports.
No image available
Worth considering if you want Wi-Fi in two areas and can run a cable between the units.
The description lists Wi-Fi 6, a total Wi-Fi speed of 1800 Mbps and optional Ethernet backhaul. The set contains two units.
No image available
A mesh router to consider if you want to build a network with multiple units.
The product information lists Wi-Fi 7 and dual-band; it says multiple units can work together under one network name.
No image available
A two-unit set for anyone who wants to use Wi-Fi nodes in several areas and needs wired connections.
Tri-band Wi-Fi 7 on 2.4, 5 and 6 GHz; the product information lists 10 Gbps Ethernet ports.
Not necessarily. ACM ConsuWijzer recommends measuring your internet speed with an Ethernet cable close to the connection point and comparing it with your package. If your connection is already the bottleneck there, look at your internet service first.
Start with the areas where the connection is weak. The Consumentenbond suggests one node for a studio, for example, and two for several rooms or floors as a guide—not a guarantee for every home. Also consider suitable locations and power.
Not the TP-Link Deco X50-PoE: TP-Link lists IEEE 802.3at and 802.3bt as supported, but not 802.3af. Also check the switch’s power budget; TP-Link lists a DC adapter as an alternative.
According to ACM ConsuWijzer, you have the right to use your own router, although a provider may refuse an unsafe device. Check that your chosen router works with your connection and find out what requirements your provider has.
No. ACM ConsuWijzer distinguishes between a manufacturer’s or seller’s warranty and statutory consumer rights. If a product is faulty despite normal use, the seller is responsible for providing an appropriate solution; there isn’t a fixed number of years for the statutory warranty on every device.