Who is this advice for?

Designer working behind thick walls

You upload files from a workspace with weak Wi-Fi and want to know how to improve the connection there. The Consumers' Association points out that upload speed matters when sending and synchronising files.

Regular uploader of large files

You want to find out whether slow uploads are caused by your home Wi-Fi or your internet connection. The Consumers' Association recommends a wired test so you don’t confuse Wi-Fi speed with the speed of your internet connection.

Resident who can’t run a cable

You need to choose between wireless mesh nodes and a powerline solution, and want to know what will work in your home. Compare the possible setups and test the connection in the intended locations.

What should you look for?

Start with a wired upload test at the router, then decide how to improve the connection to your workspace.

What matters What to look for when buying Who should consider this?
Connection through thick walls Check for Ethernet backhaul support and whether you can place a mesh node on the other side of the wall, near your workspace. If I send design files from a room with weak Wi-Fi, I want to know whether the node will get a usable connection there. Around 36% of consumers are mainly concerned about coverage through walls.
Actual upload speed Compare a wired upload test at the router with one at your workspace, and check your broadband plan too. If I send large files, I first want to establish whether the limitation is my internet connection or my home Wi-Fi. Around 29% of consumers prioritise upload speed.
Installation and equipment Check the connection options, the router or access point mode you need, and whether the planned locations are practical. If I want to keep using my existing network, I want to know how the mesh system will connect to it and where the nodes can go. Around 21% of consumers focus mainly on finding a suitable setup.
What’s included and aftercare Check which components are included in the set, what you’ll need for installation and what support is available for the model. If I want to know in advance which components and support I’ll need, I check what the set and seller provide. Around 14% of consumers prioritise these points.

Common buying mistakes

  • Confusing Wi-Fi speed with your internet upload speed

    Wi-Fi specifications and the upload capacity of your internet connection describe different parts of the connection. A mesh system can’t overcome a limitation imposed by your broadband plan.

    First, run an upload test using an Ethernet cable at the router, then compare it with a test at your workspace.

  • Putting a wireless mesh node beyond the wall without testing the connection

    Walls and other obstacles can also affect the connection between mesh nodes. A node placed where reception is at its weakest may struggle to maintain a connection itself.

    Test the connection in the intended location. If you can run a cable, look into Ethernet backhaul.

  • Assuming a larger package guarantees better coverage

    The number of nodes alone doesn’t tell you whether the weak link in your home will be fixed. Placement and room layout matter too.

    Choose the number of nodes based on the rooms you need to cover and the reception you test in the planned locations, not just on a quoted coverage area.

Brands to compare

TP-Link

The Deco range includes models for different network setups. Compare the exact model and pack size before choosing.

  • According to TP-Link, the Deco X50-PoE V2 has two 2.5 Gbps ports and PoE, while the Deco BE65 EU V1 has four 2.5 Gbps ports.
  • These model specifications alone don’t tell you how quickly files will upload through thick walls.

ASUS

AiMesh and ZenWiFi may be worth considering if you want to connect mesh nodes via Ethernet and configure the network setup yourself.

  • ASUS describes Ethernet backhaul for router and access point configurations.
  • Check that the exact model supports the connection you need, and follow the installation instructions, especially if you’re using a switch.

FRITZ!

The Mesh Wi-Fi Set 4200 (3-pack) is a Wi-Fi 6 set to compare if you need several mesh nodes.

  • The Consumers' Association lists three Wi-Fi nodes, Ethernet ports and Wi-Fi 6 for this set.
  • Consider whether the set suits your home and the connection to your workspace. The listed features don’t predict upload performance through the walls in your home.

devolo

The Magic 2 WiFi 6 next combines Wi-Fi with powerline, which uses your home’s electrical wiring for the connection.

  • According to devolo, the starter kit includes two adapters; the Wi-Fi adapter has Wi-Fi 6 and two gigabit ports.
  • Test it in your own home. The product specifications don’t tell you what upload speed you’ll get at your workspace.

Joybuy products

These Joybuy products are mesh Wi-Fi systems for connecting several rooms. Check that the connections and setup of each model suit your workspace.

TP-Link Deco X50 mesh system, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

A set with several mesh nodes for connecting different rooms. Check that Ethernet backhaul will work with your setup.

The product name lists a 3-pack, dual-band (2,4 GHz/5 GHz) and Wi-Fi 6 (802.11ax).

View at Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

An option to compare if you’re looking for a Wi-Fi 7 mesh network. Check that the model and connection between units suit your network.

The product name lists BE3600, dual-band and Wi-Fi 7.

View at Joybuy
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

A mesh router to compare if you’re looking for a Wi-Fi 6 setup. Check how the model connects to your existing network and whether it can be placed where you need it.

The product name lists AX3000, dual-band and Wi-Fi 6.

View at Joybuy
Linksys Velop Pro 7 tri-band Wi-Fi 7 mesh router

Linksys Velop Pro 7 tri-band Wi-Fi 7

An option to compare if you’re looking for a tri-band Wi-Fi 7 mesh system. Check the connections and options for linking the mesh nodes.

The product name lists tri-band (2,4 GHz/5 GHz/6 GHz) and Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link Deco X50-PoE mesh system, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50-PoE (2-pack), dual-band Wi-Fi 6

A set to compare if you want to power mesh nodes via Ethernet. Check that the cabling and power supply required will work with your setup.

The product name lists a 2-pack, PoE, dual-band (2,4 GHz/5 GHz) and Wi-Fi 6 (802.11ax).

View at Joybuy

Frequently asked questions

Will mesh automatically make my uploads to a client faster?

No. First, test your upload speed using a computer connected to the router with an Ethernet cable, then compare it with the speed at your workspace. If your internet connection is the limitation, adding Wi-Fi won’t solve the problem.

Where should I place an extra mesh node?

Don’t place a wirelessly connected node somewhere the signal from the previous node is already unusable. Test the connection in the intended location. If you can run a cable to the other side of the wall, check that your chosen system supports Ethernet backhaul and follow the installation instructions.

Do I need a three-node set straight away?

Not necessarily. The Consumers' Association suggests starting with two nodes in many homes and adding more later if needed. With thick walls, your home’s layout and reception in the planned locations will still be decisive.

What should I check after installation?

Compare the upload test at your workspace with the earlier wired test and check that the mesh node is using the intended connection. Keep your equipment’s software up to date and check what support is available for the exact model.

What are my rights when buying online in the Netherlands?

For eligible online consumer purchases, you generally have a statutory 14-day cooling-off period from the date of delivery. Your statutory guarantee is separate from any manufacturer’s warranty. If a product is faulty, contact the seller.