Who is mesh Wi-Fi suitable for?

Working across a difficult floor

You want to be able to work downstairs, but the floor or walls weaken the signal from the shared workspace. The possible cable route and the placement of the mesh nodes are important considerations. TP-Link Netherlands and ASUS Netherlands describe Ethernet backhaul as a way to connect mesh nodes using cables.

A team on simultaneous video calls

Several people share the connection, and you want to know how the link between wireless mesh nodes holds up when devices are using them at the same time. Tweakers compares mesh systems with and without a dedicated backhaul radio.

Managing an existing network

You want to keep your current modem-router and connect devices downstairs and in the shared workspace. So check the network mode and available ports. TP-Link Netherlands describes both router and access point modes for Deco.

What should you look for when choosing?

Start by asking whether you can run a cable between the mesh nodes. If not, check where a wireless node can still maintain a usable connection to the main node.

Concern What to check before buying Who is this important to?
Connection through floors or walls Check for Ethernet backhaul support. Without a cable, placement, building materials and interference all affect the wireless connection. If I work downstairs and the floor weakens the signal, I want to know whether a cable can connect the mesh nodes. Around 36% of consumers say this is their main concern.
Simultaneous use Compare wired backhaul with systems that have a dedicated backhaul radio. For wireless satellites, look for tests that reflect the setup you have in mind. If several people are working at once, I want to know how the connection between the mesh nodes is shared. Around 29% of consumers put simultaneous use first.
Existing router and devices Check the network mode, connection sequence and number of spare Ethernet ports for devices and any backhaul connection. If I want to keep my modem-router, the mesh system needs to connect to it without leaving me short of ports for work devices. Around 21% of consumers say this integration is their main concern.
Cost, features and support Check whether you’ll need a cable or switch, and whether the software features you want are included or require a subscription. If I’m also concerned about additional costs and getting help with problems, I want to understand the terms in advance. Around 14% of consumers prioritise these factors.

Common buying mistakes

  • Putting a wireless node straight into the room with poor coverage

    A mesh node also needs a usable connection to the rest of the network. Floors and walls can affect that connection.

    Check the signal where you plan to put the node. If the connection is weak there, find out whether Ethernet backhaul is an option.

  • Assuming the combined Wi-Fi speed is the speed you’ll get at your work computer

    The stated combined speed doesn’t tell you on its own what performance you’ll get downstairs through a wireless satellite. In Tweakers’ test of the TP-Link Deco X50 3-pack, performance dropped off through wireless satellites placed further away.

    Compare results from a similar satellite setup, and check the port speed if you want to connect your computer by cable.

  • Connecting mesh nodes without checking the network mode

    The connection setup depends on the operating mode you choose. TP-Link warns that certain connections in Deco router mode can create a network loop.

    First decide which router will manage the network, then follow the connection diagram for the mode you’ve chosen.

  • Assuming all security features are included

    According to Tweakers, some of the advanced security and parental control features on the Deco X50 they tested require a subscription.

    Check exactly which features are available without a subscription for the specific set you’re buying, and only pay for the extras you need.

Brands to consider

TP-Link

The Deco X50 is a dual-band mesh model worth including in your comparison if Ethernet backhaul and connection ports matter to you.

  • TP-Link Netherlands lists Ethernet backhaul and three gigabit ports for the Deco X50.
  • In Tweakers’ test of the X50 3-pack, performance fell off through wireless satellites placed further away. Manufacturer specifications aren’t an independent measurement of performance in your home.

ASUS

ZenWiFi and AiMesh are worth considering if you want to weigh up wired mesh nodes while keeping an existing router or switch.

  • ASUS describes Ethernet backhaul and connections via switches for AiMesh.
  • In Tweakers’ test, the ZenWiFi XD4 Plus 2-pack was best suited to wired use. The test also noted limitations on 5 GHz.

FRITZ!

FRITZ!Repeaters are worth considering if you want to extend a compatible FRITZ! mesh network.

  • FRITZ! lists two gigabit LAN ports on the Repeater 3000 AX, as well as a LAN connection to a FRITZ!Box.
  • Centralised mesh management requires a suitable Mesh Master. A standalone repeater is not the same as a complete set with a main router.

NETGEAR

The Orbi RBK763S is a set with a router and two satellites to compare if you’re considering wireless connections between several workspaces.

  • NETGEAR lists a dedicated connection between the router and satellites for this set, along with seven gigabit ports across the system.
  • The manufacturer’s coverage and speed claims don’t prove that the connection will work well through the floor in your home.

Mesh Wi-Fi for multiple workspaces

These mesh systems are designed to extend Wi-Fi across several rooms. Where specified, we’ve also included relevant backhaul or Ethernet options.

TP-Link Deco BE68 mesh system with 2 units

TP-Link Deco BE68 (2-pack)

This set could suit you if you’re weighing up a mesh connection across several rooms and Ethernet backhaul.

Tri-band Wi-Fi; wired and wireless backhaul; 10, 2.5 and 1 Gbps Ethernet ports per unit.

View at Joybuy
TP-Link Deco E4 mesh system with 3 units

TP-Link Deco E4 (3-pack), Wi-Fi 5

This set of three units is designed to extend a mesh network across several rooms.

Dual-band Wi-Fi 5 (2,4 GHz/5 GHz); Ethernet ports with a maximum speed of 100 Mbps.

View at Joybuy
ASUS ZenWiFi BT8 mesh system with 2 units

ASUS ZenWiFi BT8 (2-pack), Wi-Fi 7

This two-unit mesh system is an option for extending Wi-Fi across several rooms.

Tri-band Wi-Fi 7 (2,4 GHz/5 GHz/6 GHz); the product information mentions AiMesh integration with compatible ASUS routers.

View at Joybuy
ASUS ZenWiFi BD4 mesh Wi-Fi system

ASUS ZenWiFi BD4, Wi-Fi 7

This mesh system could suit you if you’re looking for a model with a wired backhaul option.

Dual-band Wi-Fi 7; the product information mentions MLO and a wired backhaul option.

View at Joybuy
TP-Link Deco M4 mesh system with 3 units

TP-Link Deco M4 (3-pack), Wi-Fi 5

This set of three units is designed for a mesh network across several rooms.

Dual-band Wi-Fi 5 (2,4 GHz/5 GHz); two Ethernet ports per unit.

View at Joybuy

Frequently asked questions

Can I put a mesh node straight into the downstairs workspace?

Only if it can still get a usable connection to the rest of the mesh network there. Floors, walls and placement all affect the wireless connection. With supported Ethernet backhaul, the location is less dependent on the wireless signal between mesh nodes.

How do I connect mesh Wi-Fi if I need to keep my provider’s router?

Check whether the system you’ve chosen has an access point mode, then follow the connection diagram for that mode. In Deco access point mode, the existing router continues to manage the network functions; router mode has different connection rules. After installation, also check that the backhaul connection is actually wired if you’re using that option.

Do I need a radio licence for Wi-Fi in workspaces in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi at home or in a business premises is licence-exempt when you use the designated frequencies and comply with the conditions of use. Licence-exempt use of frequencies does not require notification or registration, but equipment must still comply with the applicable conditions of use.

What should I check to make sure an imported mesh system is safe?

Check that the product version is intended for the EU market and read the accompanying product information. The Dutch Authority for Digital Infrastructure describes the applicable European requirements for radio equipment and the CE marking. Since 1 August 2025, stricter cybersecurity requirements have applied to equipment placed on the market. A product listing on its own doesn’t prove that a specific item meets all the requirements.

Do I lose my rights when the manufacturer’s warranty expires?

No. ACM ConsuWijzer distinguishes between a manufacturer’s warranty and your statutory guarantee. If a product doesn’t perform as you could reasonably expect under normal use, the retailer is responsible for providing an appropriate remedy under your statutory rights.