Designer working upstairs
You send design files from a workspace far from the router and want to find out first whether the bottleneck is the Wi-Fi connection or your internet service.
First, measure your upload speed by the router, then at your workspace. If the upload speed is already too low by the router, mesh Wi-Fi cannot make your internet connection faster. ACM ConsuWijzer advises taking your provider’s upload speeds into account. If your connection is fast enough, choose based on the link between floors: TP-Link describes Ethernet backhaul as more stable and faster than the Wi-Fi link between Deco units, while placement and the link between units matter in a wireless setup. Three units may be an option for a three-storey home, but they do not guarantee coverage or upload speed.
You send design files from a workspace far from the router and want to find out first whether the bottleneck is the Wi-Fi connection or your internet service.
You want to extend Wi-Fi across three floors without running cables. In that case, the placement and links between the mesh units are important considerations.
You can connect mesh units using existing cabling and are mainly looking for a stable connection between floors.
First, check whether your internet connection offers enough upload speed. Then see whether wired backhaul is possible. If it isn’t, pay extra attention to the placement and the connection between the wireless mesh units.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Coverage on the floor where you work | Test your workspace and potential locations for the units. Compare the number of units included, not just a claimed coverage area in m². | I send files from upstairs and want to know whether the network is usable there. Around 26% of consumers say coverage in their workspace is their top buying priority. |
| Reliable uploads | Compare a measurement by the router, preferably over a wired connection, with one taken at your workspace and your provider’s upload speeds. | When I send design files, I want to know whether the limitation is inside my home or with my internet connection. Around 26% of consumers prioritise reliable uploads. |
| Connection between floors | Check whether existing Ethernet cabling can be used and whether the system supports the backhaul you want. | I want to run cables if practical, but otherwise use a wireless connection between floors. Around 21% of consumers give the practicality of this route top priority. |
| Compatibility with existing equipment | Check the router or access point mode, the number of Ethernet ports you need and your provider’s requirements. | If I want to keep using my existing router and devices, I want to know in advance how the mesh system will connect to them. This is the main selection criterion for around 16% of consumers. |
| Costs, updates and support | Check what’s in the box, whether extra units cost more, what update support is available and who to contact if something goes wrong. | I consider not just the system, but also the support available while I’m using it. Around 11% of consumers prioritise costs and support. |
Wi-Fi specifications don’t tell you how much upload speed your fixed internet connection provides. A mesh system won’t overcome a limitation with that connection.
Measure the upload speed by the router and compare it with your provider’s upload speeds before choosing a Wi-Fi system.
A unit near your workspace is only useful if the connection back to the rest of the network is also good enough. A coverage claim doesn’t show how the floors and layout of your home will affect the connection.
Test your workspace and the connection between units. Then decide whether you need to reposition them, add another unit or run cables.
You may need to change the setup, add another unit or run cables to cover the areas you want.
TP-Link describes different connection setups for router and access point modes, and warns that router mode can create a network loop.
Choose the operating mode first and follow the connection diagrams for your exact system.
An unsuitable connection may mean you have to change the installation or cabling.
According to ACM ConsuWijzer, your statutory rights depend on what you could reasonably expect from the product. The seller is responsible for resolving faults.
Keep your proof of purchase and contact the seller if something goes wrong. Check what a paid-for extended warranty adds before you buy it.
The Deco range includes the Deco X50, which offers Wi-Fi 6 and wireless or optional Ethernet backhaul. It’s worth considering if you want to keep both connection options open.
The ZenWiFi BD4 is a Wi-Fi 7 mesh range available with one, two or three units. It may be worth considering if you’re looking for 2.5G ports or AiMesh compatibility.
The FRITZ!Mesh Set 1700, with three FRITZ!Repeaters 1700, is an option to compare if you want three units and plan to use the set with an existing router.
These Joybuy picks are mesh systems with three units for use in different parts of your home. The number of units doesn’t guarantee coverage on every floor, so test the connection between units and the upload speed at your workspace too.
No image available
The three units give you several possible locations for mesh nodes, but they don’t guarantee coverage on every floor.
Dual-band Wi-Fi 5 (2.4 GHz/5 GHz); the network ports described support speeds of up to 100 Mbps. Bear this port speed in mind if you connect a computer by cable.
No image available
The three-unit set gives you several possible locations for the nodes; actual coverage depends on your home and the connection between them.
Dual-band Wi-Fi 5 (2.4 GHz/5 GHz) and two gigabit Ethernet ports, according to the product description. The Deco app is mentioned for setup and help choosing where to place the units.
No image available
If you can connect the mesh units using Ethernet, the optional Ethernet backhaul mentioned may be useful. Your upload speed will still depend on your internet connection and unit placement.
Dual-band Wi-Fi 6 (2.4 GHz/5 GHz) and three gigabit Ethernet ports per unit, according to the product description.
No image available
The three units listed give you several possible locations for mesh nodes, but they don’t prove that your upstairs workspace will have enough coverage.
Dual-band Wi-Fi 5 (2.4 GHz/5 GHz); the product description lists three Ethernet ports per unit.
No image available
The three-unit set gives you several possible locations for the nodes. Check the connection between them and the upload speed at your workspace in your home.
Tri-band Wi-Fi 6E with 2.4GHz, 5GHz and 6GHz bands, according to the product name and description.
First, measure the upload speed by the router, then at your workspace. If the connection is already too slow by the router, compare it with the minimum and normally available upload speeds your provider lists for your fixed connection. Mesh can’t fix the connection itself.
Not necessarily. The number you need depends on the layout, floors and placement. Test the connection between units too: a unit upstairs won’t help much if its connection to the rest of the network is weak.
That depends on the system and the mode you choose. TP-Link describes a different cabling setup for Deco in access point mode than in router mode; ASUS lists both modes for the BD4. ACM ConsuWijzer confirms that, under certain conditions, you can choose your own router to connect to your provider’s network.
Use a strong password and install software updates. The Dutch Data Protection Authority identifies outdated software with no available updates as a potential security risk.
Radio equipment sold in the Netherlands must meet the applicable European requirements and carry the correct CE marking; the Dutch Authority for Digital Infrastructure states that this marking is compulsory. Check the exact version, as a model name alone doesn’t prove that it meets the requirements. Your statutory rights are separate from the manufacturer’s warranty period: according to ACM ConsuWijzer, contact the seller if a product breaks during normal use sooner than you could reasonably expect.