Student on a distant floor
You mainly want to know whether the connection is reliable enough where you usually study. Check coverage and node placement; the Consumers’ Association recommends placing nodes where you want to boost the signal.
Start by checking the connection where you study, then choose mesh nodes that can be positioned well there and in relation to one another. If you can connect floors using Ethernet cables, look for Ethernet backhaul; if not, the placement of the nodes and their wireless connection to each other are crucial. Also check how the system works with your existing router and which features remain available in that setup.
You mainly want to know whether the connection is reliable enough where you usually study. Check coverage and node placement; the Consumers’ Association recommends placing nodes where you want to boost the signal.
You can connect the mesh nodes by cable, so you want to know whether the system supports Ethernet backhaul and has enough ports. TP-Link and ASUS describe Ethernet backhaul for specific models.
You want to extend your Wi-Fi without unexpectedly losing router management or features you rely on. Check whether the mesh system works with your modem and what the chosen operating mode means.
First, check the connection where you study and decide where the nodes can go. Then see whether they’ll connect to each other wirelessly or via existing Ethernet cables, and how the system will work with your router.
| What to consider | What should you check? | Who should prioritise this? |
|---|---|---|
| Coverage where you study | Test the connection where you use your study portal and see whether you can place nodes in suitable spots between there and the router. | If I study on a distant floor, I need a reliable connection there. I don’t want to choose a system based solely on its claimed range. Around 36% of consumers prioritise coverage in their study space. |
| Connection between nodes | Check whether you have Ethernet cables and whether the model supports Ethernet backhaul and has the ports you need. | If I can use cables between floors, I want to know whether the nodes can connect through them. Without cables, I need to pay extra attention to placement. Around 29% of consumers prioritise the connection between nodes. |
| Compatibility with your router | Check the supported operating modes and which features will remain available if your existing router manages the network. | If I want to keep my broadband provider’s router, I need to extend Wi-Fi without losing settings or features I rely on. Around 21% of consumers make keeping their existing router their main priority. |
| Security and running costs | Check password and update settings, how many nodes will be switched on continuously, and the terms of any extra services. | If I use the system every day, I need to consider security management, power consumption and any service charges after an included trial period. Around 14% of consumers look at this first. |
A product specification can’t account for your home’s layout or where you study. Each node also needs a reliable connection to the rest of the network.
Test the connection where you study and choose locations where the nodes can also connect to one another. Base the number of nodes on your home, not just the number of floors.
If the chosen placement isn’t enough, you may need an extra node or Ethernet cabling.
TP-Link says some Deco app features, including parental controls, aren’t available in access point mode.
First decide which router will manage your network, then check that the features you want are available in that setup.
The Deco X50 and X50-PoE are different models. The Consumers’ Association specifies version EU Ver 1.0 in its X50-PoE test; don’t assume that models with similar names are identical.
Before buying, compare the full model name, hardware version and power supply method with what you need.
A different model may have different connection or power requirements.
The Deco X50 is an expandable mesh system; the X50-PoE is a separate model powered via PoE.
The ZenWiFi XD5 is a Wi-Fi 6 mesh range worth comparing for features such as Ethernet backhaul and network settings.
The Orbi RBK763S is a tri-band Wi-Fi 6 system with a router and two satellites.
SuperWifi 2 is designed to extend Wi-Fi when used with a KPN modem.
These product picks focus on mesh Wi-Fi and Wi-Fi extensions for a study space in a multi-storey home.
No image available
Worth considering if you want to connect your mesh nodes by cable or wirelessly.
The product name specifies a set of 2 nodes. The product information lists wired and wireless backhaul, as well as three types of Ethernet port per node.
No image available
A three-node system to compare if you want to extend Wi-Fi to several parts of your home and use app-based placement advice.
Wi-Fi 5 (802.11ac); the listed Ethernet ports support speeds of up to 100 Mbps.
No image available
A three-node system to consider if you want Wi-Fi in several parts of your home and help choosing where to place the nodes is important to you.
Wi-Fi 5 (802.11ac); the product information lists Ethernet ports on each node.
No image available
Worth comparing if you have Ethernet cables between the nodes; TP-Link says the Deco X50 supports Ethernet backhaul.
The product name specifies a set of three nodes with Wi-Fi 6 (802.11ax). TP-Link lists three gigabit ports per node for this model.
No image available
A mesh router to consider if you want a network with a single network name and roaming managed through an app.
The product name specifies AX3000, dual-band and Wi-Fi 6; the product information lists mesh technology, a single SSID and roaming.
No, the number of nodes doesn’t automatically depend on the number of floors. Choose their positions based on your home and check the connection where you study; the Consumers’ Association recommends placing nodes where you want to boost the signal.
According to TP-Link, a Deco system can work behind a main router in access point mode. Check which features you need beforehand, as TP-Link says some features, including parental controls in the Deco app, aren’t available in this mode.
Use a strong router and Wi-Fi password, and install software updates. The Dutch Data Protection Authority also recommends turning off remote access to your router settings if you don’t use it.
Remember to factor in the power used by nodes that stay switched on all the time. NETGEAR includes one year of Armor with the Orbi RBK763S; check the terms if you want to keep using the service afterwards.
Radio equipment placed on the market in the Netherlands must display the correct CE marking on the device, according to the Dutch Authority for Digital Infrastructure. Check the model actually supplied: a listing in an online shop doesn’t confirm the marking on the device itself.