Uploading across multiple floors
You don’t always work next to your router and want to find out whether Wi-Fi is the bottleneck where you upload. Consumentenbond recommends running a speed test using a network cable.
First, check your upload speed using a wired connection at your router, then compare it with a test at your workstation: mesh can improve Wi-Fi coverage around your home, but it won’t make your internet connection faster. If you have suitable cables between floors, you could consider a mesh system with Ethernet backhaul; without them, placement and the wireless connection between the units are key. Also check that the network mode you choose works with your existing router.
You don’t always work next to your router and want to find out whether Wi-Fi is the bottleneck where you upload. Consumentenbond recommends running a speed test using a network cable.
You can connect floors with cables and are looking for mesh points that support Ethernet backhaul. TP-Link and ASUS describe this option for certain systems.
You want to position mesh points wirelessly and need to take floors, walls and the connection between the units into account. That’s why the connection at your planned location matters more than the stated coverage area alone.
Choose this when: suitable network cables run to the floors you need and you want to connect the points with cables.
Bear in mind: you’ll need the right cables and ports; mesh won’t fix a slow upload speed from your broadband connection.
Choose this when: running cables between floors isn’t practical and you can position the points where they can still connect to the network.
Bear in mind: walls, floors and distance can weaken the wireless connection.
Start here when: upload speeds are disappointing in one location or a wired test at the router is already slow.
Bear in mind: this could save you from an unnecessary mesh purchase, but it won’t automatically fix weak spots across several floors.
| What to consider | What to look for | Who should pay extra attention? |
|---|---|---|
| Wi-Fi where you upload | Test in the places where you work; don’t rely on the stated coverage area alone. | If I upload on different floors, I want to know whether Wi-Fi is available there. Around 36% of consumers prioritise having usable Wi-Fi where they upload. |
| Connection between mesh points | Check whether Ethernet backhaul is possible; if not, test the wireless connection at the planned location. | If I have cables between floors, I want to connect the mesh points by cable; without cables, I need to check whether each point can maintain a wireless connection. Around 29% of consumers prioritise the connection between mesh points. |
| Upload speed from your broadband connection | Run a wired test at the router and compare the result with the upload speeds in your contract. | If my portfolio is also slow to upload over a wired connection, I want to find out first whether my broadband connection is the bottleneck. Around 21% of consumers want to run this upload-speed check first. |
| Router and what’s included in the set | Check the network mode, the cables you’ll need and the number of units in the exact version. | I may want to keep using my provider’s router and understand in advance which features and equipment I’ll need. Around 14% of consumers prioritise router integration and the set-up required. |
A Wi-Fi test and a test of your broadband connection answer different questions. A mesh system won’t make the internet connection itself faster.
First, run a wired test at the connection point and compare the result with the upload speeds in your contract.
Floors, walls and distance all affect the connection. A wireless mesh point also needs to stay connected to the rest of the network.
Plan where to place the points on each floor and check the connection where you actually upload.
Positioning may take extra work; if a wireless connection isn’t reliable enough, you may need to run cables.
TP-Link says that in Deco access point mode, the existing router manages tasks such as assigning IP addresses; some Deco features aren’t available in this mode.
Check which features you use and consult the documentation for your exact system and firmware.
A manufacturer’s warranty doesn’t replace your statutory rights against the seller.
Keep your proof of purchase and contact the seller if there’s a fault.
The Deco X50 is a Wi-Fi 6 mesh range to consider if you’re looking for optional Ethernet backhaul and a choice of router or access point mode.
The ZenWiFi XD5 is a Wi-Fi 6 option to compare if you can run wired connections between units.
The FRITZ!Mesh Set 1700 (3-pack) is worth considering separately if you’re looking for three units and compatibility with an existing router.
eero 6+ is a Wi-Fi 6 mesh option to consider if you’re looking for a set with multiple units and a choice of wired or wireless connections.
This selection includes mesh Wi-Fi sets with multiple units. Check the number of units and the stated Wi-Fi standard for each version, and make sure the connections and network mode are compatible with your home network.
No image available
A mesh system with two units; first, check whether two points are enough for the places where you upload across your three floors.
No image available
For anyone considering a mesh system with three units to place in several locations.
The Ethernet ports are rated for a maximum speed of 100 Mbps; bear this in mind if you need wired connections.
No image available
For anyone looking to spread three mesh points across several locations; check where each point can maintain a connection to the network.
No image available
For anyone looking to position three mesh points and connect wired devices.
No image available
For anyone considering a mesh system with three units and looking for Wi-Fi 6E.
The product name specifies tri-band and Wi-Fi 6E (802.11ax).
Check the connection where you upload and position the points so they can maintain a connection to the network. With wireless connections, walls, ceilings and distance can weaken the signal; if you have suitable cables, you can connect compatible systems by cable.
That depends on the system and the configuration you choose. TP-Link describes an access point mode for Deco in which the existing main router assigns IP addresses and Deco extends wireless coverage. Some Deco features aren’t available in this mode, so check the documentation for your exact system.
No, mesh won’t increase the agreed upload speed of your broadband connection. First, run a wired test at the connection point and compare the result with the upload speeds in your contract. ACM ConsuWijzer says providers must state, among other things, the minimum upload and download speeds for a fixed connection.
According to the Dutch government, there’s no fixed statutory warranty period in the Netherlands; you’re entitled to a product that meets the standards you can reasonably expect. A manufacturer’s warranty is in addition to those statutory rights. Contact the seller if there’s a fault.
Radio equipment placed on the market in the Netherlands must meet the relevant European requirements and carry a CE mark. Check the marking and details for the exact version you’re considering.