Who is mesh Wi-Fi suitable for?

Watching from different floors

You want to follow the concert in places where your current Wi-Fi signal is weakened by floors or walls. The location of your viewing devices and mesh nodes matters more than the quoted coverage area. Hardware Info and TP-Link Netherlands explain, respectively, the impact of connections and what mesh systems can offer.

Home with network cabling

You can connect mesh nodes on different floors using cables and want their connection to avoid relying on Wi-Fi passing through the floors. eero Support and NETGEAR Support describe Ethernet backhaul as a connection option for compatible mesh systems.

Household with several simultaneous streams

While you’re watching the concert, other devices are in use too. So it’s worth assessing the connection between nodes, the available bands and the speed where you’ll be watching. Hardware Info discusses shared capacity on mesh networks, while the Netflix Help Centre provides speed guidance for its own streaming service.

What should you look for when choosing?

Consideration What to look for Who it matters to
Coverage where you watch Map out viewing spots and possible node locations; check how many nodes are included and test the signal where you’ll be watching. I want to follow the concert on the floor where my current signal is weak. Around 36% of consumers prioritise coverage where they watch.
Connection between nodes Check that your chosen nodes support Ethernet backhaul and that there’s a suitable cable route. If not, test the wireless connection at the intended locations. If I can run cables between floors, I want to connect the nodes using them rather than relying on Wi-Fi passing through floors. Around 29% of consumers prioritise the connection between mesh nodes.
Simultaneous use Compare the actual band configuration and measure the connection on your viewing device while other devices are in use. If other devices are streaming during the concert, I want to know how well the connection holds up where I’m watching. Around 21% of consumers prioritise capacity when several devices are in use at once.
Provider router and features Decide which device will handle the router functions, and check the features available in your chosen mode and any additional services. I want to take my existing provider router and the features I need into account when choosing. Around 14% of consumers prioritise compatibility with their setup and the management features they want.

Common buying mistakes

  • Assuming a coverage area or AX speed guarantees reception in the loft

    Your actual connection also depends on floors, walls and where you place the nodes. A quoted coverage area doesn’t prove that your stream will be stable in every viewing spot.

    Map out your viewing spots and possible node locations, then test the connection where you want to watch the concert.

  • Assuming every additional node can be connected by cable

    For example, eero distinguishes between the eero 6+ router, which has Ethernet ports, and the eero 6+ Extender, which does not. Check the connections on every component in your chosen set.

    A wired setup may require compatible node variants, cables or a switch.

  • Expecting access point mode to retain all router features

    According to TP-Link, gateway features disappear from the Deco app when the system is in access point mode.

    Before installation, decide which device will handle the router functions and check which features are available in your chosen setup.

  • Relying on the Deco XE75 Pro port details without checking them

    The Joybuy product page lists both three gigabit ports and two 1Gbps ports plus one 2.5Gbps port.

    Check the port details for the exact version with the manufacturer and on the device you receive before planning your cabling around them.

Brands to consider

TP-Link

The Deco range includes dual-band and tri-band systems, as well as models designed for wired setups.

  • TP-Link Netherlands lists three gigabit ports per unit and optional Ethernet backhaul for the Deco X50. The Deco XE75 Pro has a different band configuration, with 2.4, 5 and 6 GHz.
  • An additional band doesn’t guarantee a strong connection through floors. TP-Link says gateway features disappear from the app when a Deco system is in access point mode.

ASUS

The ZenWiFi XT9 is a tri-band Wi-Fi 6 system with two 5GHz bands.

  • ASUS specifies one 2.5Gbps WAN port, three gigabit LAN ports and an access point mode for the XT9.
  • These are model specifications, not measurements in a three-storey home. ASUS also notes that 160MHz bandwidth at 5 GHz may be restricted in some regions.

eero

The eero 6+ is a dual-band Wi-Fi 6 option for anyone looking for mesh nodes with Ethernet ports.

  • According to eero, the 6+ router has two gigabit ports, and compatible eero devices can be connected using Ethernet backhaul.
  • According to eero, the eero 6+ Extender has no Ethernet ports. eero also offers an optional Plus subscription; check the applicable terms in the Netherlands before taking its features into account.

NETGEAR

Orbi is an option to compare when considering wireless and wired connections between the router and satellites.

  • NETGEAR describes both backhaul options for compatible Orbi systems.
  • The support information doesn’t automatically apply to every Orbi set. NETGEAR recommends updating the firmware before setting up Ethernet backhaul.

Mesh systems at Joybuy

These products are mesh sets for multi-storey homes, with differences in Wi-Fi generation, band configuration and wired connectivity. For radio equipment, check that the hardware version actually on offer meets the applicable requirements and carries the CE marking. The Dutch Radiocommunications Agency reports that stricter European digital security requirements have applied since 1 August 2025; information about a different model or hardware version does not confirm that the item you receive meets them.

TP-Link Deco E4 mesh set, 3-pack, dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

Three mesh units give you several possible locations; how well they work on each floor also depends on the connection and where you place them.

Dual-band, 2.4 and 5 GHz, Wi-Fi 5 (802.11ac). According to the product description, the Ethernet ports support speeds of up to 100 Mbps.

Joybuy
TP-Link Deco M4 mesh set, 3-pack, dual-band Wi-Fi 5

TP-Link Deco M4 (3-pack), dual-band Wi-Fi 5

The set includes three stations that can be placed on different floors; the eventual connection also depends on your home and where you place them.

Dual-band, 2.4 and 5 GHz, Wi-Fi 5 (802.11ac). The product description lists Ethernet ports on each station.

Joybuy
TP-Link Deco X50 mesh set, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

An option to compare if you want to connect the mesh units by cable. Placement and the connection where you watch remain key.

Wi-Fi 6, dual-band at 2.4 and 5 GHz. TP-Link Netherlands lists three gigabit ports per unit and optional Ethernet backhaul.

Joybuy
TP-Link Deco S7 mesh set, 3-pack, dual-band Wi-Fi 5

TP-Link Deco S7 (3-pack), dual-band Wi-Fi 5

Three units give you possible locations on different floors; a reliable connection on every floor is not guaranteed.

Dual-band, 2.4 and 5 GHz, Wi-Fi 5 (802.11ac). The product description lists three Ethernet ports per unit.

Joybuy
TP-Link Deco XE75 Pro mesh set, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

The tri-band configuration is an option to compare if the connection between mesh nodes will remain wireless; 6 GHz does not guarantee a strong signal through floors.

The product title lists 2.4, 5 and 6 GHz and Wi-Fi 6E. Check the port details for the exact version before planning your cabling around them.

Joybuy

Frequently asked questions

Will a faster mesh router help if the concert also stutters close to my current router?

Not necessarily. First check your internet connection and the speed on the device you’re watching on. Netflix recommends a stable connection of at least 15 Mbps for its own 4K films, series and live events; don’t assume this guidance applies to another streaming service.

Can I keep my provider’s router?

You can with a suitable setup, but decide which device will handle the gateway functions. TP-Link explains that in access point mode, the existing router remains the gateway and gateway features disappear from the Deco app. Check which features are available for your exact model and chosen setup.

How do I maintain a wired mesh connection?

After installation, check that the nodes are actually connected via Ethernet. NETGEAR recommends updating the firmware on the router and satellites before setting up Ethernet backhaul on Orbi; for other systems, follow the manufacturer’s instructions.

Do I need to register a Wi-Fi mesh system or apply for a licence for it in the Netherlands?

According to the Dutch Radiocommunications Agency, no notification or registration is required for designated licence-exempt uses, including Wi-Fi. Radio equipment must still meet the applicable requirements. So check the hardware version actually on offer and its CE marking.

Is a manufacturer’s warranty the same as a statutory guarantee?

No. According to the Dutch government, there is no fixed term for the statutory guarantee in the Netherlands; a manufacturer’s warranty is in addition to it. If a product is faulty, the retailer is your point of contact for a solution.