Who is this guide for?

Home worker with weak Wi-Fi upstairs

Your workspace is on a different floor from your router. Where you place your mesh nodes and how they connect to each other will determine whether the extra coverage helps at your desk. The Consumers' Association (Consumentenbond) also points out that walls and ceilings can interfere with the signal.

Home worker with local network storage

You copy documents to storage at home and may want to connect a computer or mesh node via Ethernet. Check which ports the model you choose has and how they need to be connected; TP-Link and ASUS describe different port layouts and connection options.

Home worker with cloud backup

Your backup goes over the internet. So check both the Wi-Fi at your workspace and your internet connection, as well as how your files are protected. VeiligInternetten describes backups to destinations including cloud and local storage.

What should you consider when choosing?

Mesh with wired backhaul

Best if: suitable network cables are already in place, or can be installed, between the locations you want to connect. This is especially worth considering if you regularly copy files to local storage.

Bear in mind: you’ll need to consider installation, space for connections, and the ports and connection rules for the specific model. TP-Link describes different connections for Deco depending on the mode.

Fully wireless mesh

Best if: running cables between floors isn’t practical and you can position the nodes where they can connect reliably to each other.

Bear in mind: ceilings and other obstacles can weaken the signal. NETGEAR lists a dedicated router-to-satellite connection for the Orbi RBK763S, but this doesn’t guarantee coverage in your home.

Check your existing connection first

Best if: you’re not yet sure whether the problem is with your Wi-Fi, internet connection or backup destination. VeiligInternetten advises storing backups on a suitable storage destination.

Bear in mind: this could delay buying a mesh system, but a mesh kit doesn’t make copies of your files.

What to consider What should you check? Who is this important for?
Coverage across floors Check the number of nodes, whether the system can be expanded, and the connection at your workspace. If my workspace is upstairs, I want a usable connection there and between the mesh nodes; around 36% of consumers prioritise reliable coverage.
Connection for backups Decide whether you’ll copy files to local storage or the cloud, then check the cables and ports you’ll need. When I copy documents to a local drive or online destination, I want my chosen connection to be suitable; around 29% of consumers prioritise the backup connection.
Protection for work documents Check the security settings and any requirements your employer has for storage and encryption. For work files, I want to be able to store a copy and restore it in line with the relevant requirements; around 21% of consumers prioritise document protection.
Compatibility with your network Check the package configuration, router or access point mode, and which ports will still be available after installation. I want to choose a kit that suits my router and devices, without paying for features I can’t use; around 14% of consumers are most concerned about compatibility and suitable features.

Common pitfalls

  • Assuming the stated coverage applies to every floor

    A coverage figure applies to a specific package configuration. Ceilings and other obstacles affect the signal in your home; the Consumers' Association (Consumentenbond) highlights this too.

    Compare like-for-like package configurations, then check the connection at your workspace and between the nodes once everything is set up.

    If the connection isn’t good enough, you may need an extra node or to install cabling.

  • Assuming Wi-Fi speed is the same as backup speed

    A higher quoted Wi-Fi speed doesn’t, by itself, tell you how quickly documents will be copied to local storage or sent to the cloud over your internet connection.

    First decide where you’ll back up your files, then test your existing internet connection using a wired computer.

  • Thinking of mesh as a backup

    A mesh kit connects devices, but it doesn’t automatically store a recoverable copy of your work documents.

    Separately check that you have a recent copy on a suitable destination and that you can restore your files.

    You’ll also need to choose separately where to store your files; local storage and cloud services each have their own terms.

Brands to compare

TP-Link

The Deco X50 is worth considering if you’re looking for an expandable dual-band Wi-Fi 6 system with Ethernet backhaul.

  • TP-Link lists Ethernet backhaul and three gigabit ports per Deco X50 unit.
  • Coverage and speed figures aren’t measurements taken in your home. Check the connection requirements for your chosen mode and package configuration.

ASUS

The ZenWiFi BD4 is a dual-band Wi-Fi 7 kit to compare if you’re weighing up wired backhaul options and router or access point mode.

  • ASUS lists two 2.5G ports per unit and various security options for the BD4.
  • The kit operates on 2.4 and 5 GHz; the Wi-Fi generation or stated coverage alone won’t predict how the connection will perform in your home.

NETGEAR

The Orbi RBK763S is worth looking into if the connection between the router and satellites is important to you.

  • For this kit, which includes a router and two satellites, NETGEAR describes a dedicated router-to-satellite connection and seven gigabit ports in total.
  • The stated coverage and performance figures aren’t measurements taken in your home; assess the connection between floors at the intended locations.

FRITZ!

The FRITZ!Mesh Wi-Fi Set 1700 (3-pack) is a three-node kit to compare if you want to keep your existing router.

  • FRITZ! describes the kit as three FRITZ!Repeaters 1700 for use with an existing router.
  • Before choosing, check that the exact package configuration and its connection to your existing router suit your setup.

Joybuy products

The Joybuy options below are mesh kits with two or three devices for Wi-Fi across multiple floors. Check that the number of nodes and connections on each model suit your backup setup.

ASUS ZenWiFi BT8 (2-Pack) Tri-Band Wi-Fi 7

ASUS ZenWiFi BT8 (2-Pack) Tri-Band Wi-Fi 7

A two-device mesh kit to compare if you need Wi-Fi across multiple floors.

Tri-band Wi-Fi 7 (802.11be), with 2.4 GHz, 5 GHz and 6 GHz bands; the specifications list 2.5 Gbps Ethernet ports and WPA3.

View at Joybuy
TP-Link Deco M4 (3-Pack) Dual-Band Wi-Fi 5

TP-Link Deco M4 (3-Pack) Dual-Band Wi-Fi 5

A three-device mesh kit to compare if you want to position nodes across multiple floors.

Dual-band Wi-Fi 5 (802.11ac), 2.4 and 5 GHz. The product description lists two Ethernet ports per unit.

View at Joybuy
TP-Link Deco X50 (3-Pack) Dual-Band Wi-Fi 6

TP-Link Deco X50 (3-Pack) Dual-Band Wi-Fi 6

A three-device mesh kit to compare if you want to use Wi-Fi across multiple floors.

Dual-band Wi-Fi 6 (802.11ax), 2.4 and 5 GHz. TP-Link lists three gigabit ports per unit.

View at Joybuy
ASUS ZenWiFi BT10 (2pk) Tri-Band Wi-Fi 7

ASUS ZenWiFi BT10 (2pk) Tri-Band Wi-Fi 7

A two-device mesh kit to compare if you need Wi-Fi across different floors.

Tri-band Wi-Fi 7 (802.11be), with 2.4 GHz, 5 GHz and 6 GHz bands.

View at Joybuy
TP-Link Deco XE75 Pro (3-Pack) Tri-Band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-Pack) Tri-Band Wi-Fi 6E

A three-device mesh kit to compare if you want to use Wi-Fi across multiple floors.

Tri-band Wi-Fi 6E, with 2.4 GHz, 5 GHz and 6 GHz bands. The specifications list three gigabit ports per unit and WPA3.

View at Joybuy

Frequently asked questions

Do I always need three nodes for a mesh system because my house has three floors?

No, the number of nodes doesn’t automatically depend on the number of floors. Consider where your router and workspace are, position the nodes so they have a usable connection to each other, and check the signal at your workspace. The Consumers' Association (Consumentenbond) points out that walls and ceilings affect coverage.

How do I connect Deco nodes to my existing router using a cable?

The right connection depends on whether you’ve chosen router or access point mode. For router mode, TP-Link describes connecting the satellite to the LAN side of the main Deco or to a switch connected to it; access point mode has different connection options. Check the mode and backhaul status in the app.

Does mesh Wi-Fi back up my work documents automatically?

No, a mesh kit isn’t a storage destination for your files. Keep a recent backup separately on a suitable local or online destination, and check that you can restore your files. Make sure your storage and any encryption comply with your employer’s rules.

What if the kit doesn’t work properly or meet expectations after I buy it?

With normal use, a product in the Netherlands must meet what you could reasonably expect of it. If a product is faulty, the seller must provide an appropriate remedy free of charge. ACM ConsuWijzer states that ordinary online consumer purchases also usually come with a 14-day cooling-off period, subject to legal exceptions.

What Dutch conformity rules apply to a new mesh router?

The Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) states that radio equipment placed on the EU market must meet the applicable requirements and carry the correct CE marking. Since 1 August 2025, stricter cybersecurity requirements have also applied to certain wireless equipment placed on the market. Check the specific version supplied; specifications for a different version don’t, by themselves, show that it meets Dutch requirements.