Who is this relevant to?

Watching on a floor with a weak signal

You watch on a floor where your existing Wi-Fi signal is too weak and want to work out where to place the Wi-Fi nodes. The Consumers’ Association recommends starting with three nodes for a three-floor home; this is not a guarantee for every property.

Homeowner with network cables

You can connect floors using a network cable and want to check whether Ethernet backhaul will work with the connections available.

Homeowner without a cable route

You want to connect the floors wirelessly, so the placement of the nodes in relation to each other and any obstacles between them are especially important. The Consumers’ Association recommends placing the nodes with as few obstacles between them as possible.

What should you look for when choosing?

Start with the connection where you watch, then decide how the mesh nodes will connect to each other. The Consumers’ Association suggests three nodes as a starting point for a three-floor home; getting the placement right is still important.

What to consider What to look for when buying Who is this important for?
Coverage where you watch Check how many nodes are included and where you can place them; the number of nodes does not guarantee coverage through every floor. If I mainly watch TV on one particular floor, I want the signal to be reliable there. Around 36% of consumers prioritise coverage where they watch.
Connection between nodes Check whether the system supports Ethernet backhaul and which ports are available. Without cables, it’s important to keep obstacles between wireless nodes to a minimum. If I can use cables between floors, I want to know whether the system can use those connections; without a cable route, I need to assess the wireless placement. Around 29% of consumers prioritise the connection between nodes.
Streaming on your playback device Test the connection by your TV or playback device and compare it with your streaming service’s requirements. If I mainly want to watch a documentary without interruptions, I focus on the connection by my TV, not just the Wi-Fi specifications. Around 21% of consumers prioritise streaming where they watch.
Purchase, installation and management Check what the complete setup requires in terms of nodes, cables and power, how the system connects to your existing router, and how updates are managed. If I want to keep my existing equipment and make installation simple, I also compare what the system needs once it’s set up. Around 14% of consumers prioritise cost and management.

Common buying mistakes

  • Assuming maximum Wi-Fi speed equals streaming quality

    A stated radio speed doesn’t tell you what speed your TV will receive where you watch. Your internet connection also plays a part.

    Test the connection by your TV or playback device and compare it with the requirements of the streaming service you use.

  • Placing an extra node where it can barely get a signal itself

    Three nodes alone don’t guarantee a good connection between floors. The Consumers’ Association recommends keeping obstacles between Wi-Fi nodes to a minimum.

    Plan the placement of the nodes in relation to each other first. If you can run cables, compare a system with Ethernet backhaul.

    An unnecessary extra Wi-Fi node also uses electricity and may leave a placement problem unsolved.

  • Treating similarly named Deco versions as the same product

    TP-Link lists different features for the Deco X50, X50 Pro and X50-PoE. Ports, power and mounting options can vary between versions.

    Before buying, check the full model name, ports, power supply and mounting options for the exact system on offer.

Brands to compare

TP-Link

The Deco range includes mesh systems with different connection and placement options. These may be useful if you want to use cables between floors.

  • According to TP-Link, the Deco X50 supports Ethernet backhaul and each unit has three gigabit ports.
  • The X50, X50 Pro and X50-PoE are different versions. Manufacturer figures for wireless speed or coverage are not measurements taken in your home.

FRITZ!

According to FRITZ!, the FRITZ!Mesh Set 1600 (3-piece) consists of three FRITZ!Repeater 1200 AX units and is designed to extend an existing router’s coverage.

  • FRITZ! lists a gigabit LAN connection on each repeater and app-based setup for this system.
  • Check how the system connects to your router and where you can place the three nodes; the number of units does not guarantee coverage on every floor.

ASUS

According to ASUS, the ZenWiFi XT9 is a tri-band Wi-Fi 6 mesh system available with one or two units, making it worth comparing when you’re considering wireless placement.

  • ASUS specifies two 5GHz bands for the XT9.
  • Stated radio speeds don’t tell you what coverage you’ll get in a multi-storey home. A two-pack does not automatically include three units.

Joybuy products

These Joybuy picks are three-unit mesh systems for different placement options around your home. Check how they connect to your existing router and that the exact device has the correct CE marking; the RDI requires this marking for electrical equipment.

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack)

The three-unit system gives you several possible places to position Wi-Fi nodes around your home.

Dual-band Wi-Fi 5 (802.11ac); according to the product description, the Ethernet ports support up to 100 Mbps per unit.

View at Joybuy
TP-Link Deco M4 (3-pack), dual-band Wi-Fi 5

TP-Link Deco M4 (3-pack)

According to the product description, the three stations work together as a mesh network, with several possible placement options.

Dual-band Wi-Fi 5 (802.11ac); the product description lists Ethernet ports.

View at Joybuy
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack)

This three-unit system may suit you if you need several placement options; placement also affects the connection on each floor.

Dual-band Wi-Fi 6 (802.11ax); TP-Link lists optional Ethernet backhaul and three gigabit ports per unit.

View at Joybuy
TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack)

The three units give you several possible places to position mesh Wi-Fi around your home; the number of units alone doesn’t tell you how strong the connection will be where you watch.

Tri-band Wi-Fi 6E (802.11ax), with 2.4, 5 and 6 GHz bands according to the product name.

View at Joybuy
TP-Link Deco XE75 (3-pack), tri-band Wi-Fi 6E

TP-Link Deco XE75 (3-pack)

The three units give you several possible placement options; check the signal on the floor where you watch.

Tri-band Wi-Fi 6E (802.11ax) with 2.4, 5 and 6 GHz bands; the product description lists three Ethernet ports per unit.

View at Joybuy

Frequently asked questions

How many Wi-Fi nodes do I need for three floors?

The Consumers’ Association recommends starting with three nodes for three floors. Don’t treat this as a guarantee of coverage: obstacles and placement also affect how well the nodes connect to each other.

How can I check whether I can stream a documentary smoothly?

Check your network speed where you watch, ideally on the playback device itself. Netflix recommends at least 5 Mbps for 1080p and 15 Mbps for 4K on a stable connection; other streaming services may have different requirements.

Do I need to replace my internet provider’s modem to use a mesh system?

Not necessarily: FRITZ! says the Mesh Set 1600 can connect to an existing router. ACM ConsuWijzer says you can choose your own router in the Netherlands; if you replace a modem, also check the relevant connection and safety requirements.

What ongoing management does a mesh system need?

Keep the firmware up to date; ACM ConsuWijzer highlights updates as important for network security. Also compare the energy use of the complete setup: the Consumers’ Association includes this in its testing method.

Do I need a Wi-Fi permit or registration in the Netherlands?

According to the RDI, you don’t need to notify or register to use the designated licence-exempt frequencies, provided you comply with the conditions of use. Use the correct country settings; the RDI warns that incorrect settings can lead to excessive transmission power and interference.

Which product marking should I check?

According to the RDI, electrical equipment such as a Wi-Fi router must have the correct CE marking. Check the exact device; the general requirement doesn’t confirm that a specific product on offer complies with it.