Who is this buying guide for?

Learners behind a thick wall

If your language lessons mainly keep cutting out in the room where you study, first check whether the Wi-Fi signal or the connection between mesh nodes is the limiting factor. The Consumentenbond points out that walls and ceilings can interfere with the signal.

Learners with a cable route

If you can run an Ethernet cable to the floor where you take your lessons, compare mesh systems that support Ethernet backhaul. Also check how the cable needs to connect to the nodes you choose.

Learners without a cable route

If running a cable isn’t practical, you can compare wireless mesh with a suitable powerline mesh kit. With wireless nodes, placement matters; with powerline, the connection needs to work through your home’s electrical wiring.

What should you look for when buying?

For anyone considering mesh Wi-Fi to stream language lessons behind thick walls, the first choice depends on the cable route, your existing router and the connection where you take your lessons.

Concern What to look for when buying Who is this important to?
Connection behind thick walls Compare wireless, Ethernet and powerline backhaul. Decide where the nodes can go, then test the connection where you take your lessons. If my lesson keeps cutting out behind a thick wall, the main thing I want is a usable connection in that room. Around 36% of consumers put coverage behind walls at the top of their buying priorities.
Making use of an Ethernet cable Check whether the system supports Ethernet backhaul and whether the ports and number of nodes suit your setup. If I can run a cable to the room where I take my lessons, I want to use it to connect the nodes. Around 29% of consumers give having a cable route available their top priority.
Connecting to your existing router Check how the system connects to your router and whether access point or bridge mode is available. FRITZ! Mesh has model and software requirements. If I want to keep my current router, I’m looking for a setup that connects to it properly. Around 21% of consumers prioritise easy connection to their existing router.
Running costs and support Compare the number of nodes required, power consumption, update policy and any extra features. Treat the statutory guarantee separately from the manufacturer’s warranty. Once the connection where I take my lessons is sorted, I also want to know what’s involved in running and maintaining the system over time. Around 14% of consumers give costs and support their top priority.

Common pitfalls

  • Placing a wireless node directly behind the thickest wall

    The extra node still needs a usable connection to the rest of the network. Placing it somewhere the signal is already weak won’t solve the problem by itself.

    Try placing it somewhere in between, with fewer obstacles. If you can run a cable to where you take your lessons, check whether Ethernet backhaul is suitable for your system.

  • Taking theoretical combined speeds as the speed of your lesson

    TP-Link lists separate theoretical figures for Wi-Fi bands and G.hn powerline. These don’t measure the connection behind your walls or over your electrical wiring.

    Assess the connection where you take your lessons. If you’re using a Deco PX50 setup, check in the app whether PLC backhaul is active.

  • Assuming all Deco powerline models work together as one backhaul

    According to TP-Link, the PX50 doesn’t form a powerline backhaul with the Deco P7, P9 or PX10.

    Before expanding your setup, check the full model number and the backhaul standard it supports.

  • Confusing the manufacturer’s warranty period with the full statutory guarantee

    ACM ConsuWijzer explains that the Dutch statutory guarantee doesn’t have a fixed period that applies to every product.

    Keep your proof of purchase and discuss any fault with the seller. Treat any additional manufacturer’s warranty as a separate arrangement.

Brands to compare

TP-Link

The Deco range includes systems with Ethernet backhaul and the PX50, which combines Wi-Fi with G.hn powerline between compatible nodes.

  • TP-Link lists three gigabit ports on each Deco X50 node.
  • The PX50 doesn’t form a powerline backhaul with the Deco P7, P9 or PX10. The stated coverage won’t predict how the system performs in your home.

ASUS

AiMesh and ZenWiFi systems are worth considering if you’re looking for a wired mesh setup or configurable router or access point mode.

  • ASUS describes Ethernet backhaul, including via a suitable switch, and provides setup instructions for router and AP modes.
  • Check the ports and support offered by the exact model. Setup instructions don’t mean every model has the same connections.

FRITZ!

The FRITZ!Repeater 3000 AX is particularly relevant if you want to extend a compatible existing FRITZ!Box over a wired connection.

  • FRITZ! describes integration into FRITZ! Mesh when the repeater is connected via LAN to a FRITZ!Box running FRITZ!OS 7 or later.
  • Don’t assume the same mesh integration applies unless you meet those router and software requirements.

NETGEAR

Orbi is an option to compare if you’re looking for a mesh router with a satellite and want to consider wireless and wired backhaul.

  • NETGEAR describes both connection types for applicable Orbi systems.
  • The instructions don’t automatically apply to every Orbi model; NETGEAR recommends updating the firmware before setting up Ethernet backhaul.

Mesh systems on Joybuy

The products shown are multi-node mesh kits from TP-Link Deco and ASUS ZenWiFi. Where the product information mentions Ethernet backhaul, a cable between compatible nodes may be an option. Check which connections and ports suit your home for each model.

TP-Link Deco BE68 mesh Wi-Fi system, 2-pack

TP-Link Deco BE68 (2-pack)

An option if you’re looking for a mesh kit with two nodes and a choice of wired or wireless backhaul.

The product description lists Wi-Fi 7, multi-gigabit ports and simultaneous use of wired and wireless backhaul.

Joybuy
TP-Link Deco E4 mesh Wi-Fi system, 3-pack

TP-Link Deco E4 (3-pack)

A three-node kit to compare if you want Wi-Fi in several areas of your home.

The product information lists dual-band Wi-Fi 5 (2.4 and 5 GHz) and two network ports per unit.

Joybuy
ASUS ZenWiFi BT8 mesh Wi-Fi system, 2-pack

ASUS ZenWiFi BT8 (2-pack)

An option to compare if you’re looking for an ASUS mesh system with two nodes.

The product title lists tri-band Wi-Fi 7 on 2.4, 5 and 6 GHz; the product description mentions AiMesh.

Joybuy
TP-Link AX1800 mesh Wi-Fi system, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

An option to compare if you’re looking for a mesh kit with two nodes that supports Ethernet backhaul.

The product information lists Wi-Fi 6, optional Ethernet backhaul and three gigabit ports per unit.

Joybuy
TP-Link Deco X50 mesh Wi-Fi system, 3-pack

TP-Link Deco X50 (3-pack)

A three-node kit to compare if you need mesh nodes in several areas.

The product information lists dual-band Wi-Fi 6 (2.4 and 5 GHz), optional Ethernet backhaul and three gigabit ports per unit.

Joybuy

Frequently asked questions

Should I buy a mesh kit straight away if my language lesson keeps cutting out?

No. First, also check the internet connection using an Ethernet cable connected to your router. This can help you work out whether the problem is with the connection into your home or the Wi-Fi where you take your lessons. Walls and ceilings can interfere with the wireless signal.

Where should I put a wireless mesh node?

Don’t automatically put a wireless node where you have no reception at all. The Consumentenbond’s advice is that Wi-Fi nodes work best with few obstacles between them. If the signal is weak, first try an intermediate location and check the connection indicator or app.

Can I combine a Deco PX50 with older Deco powerline nodes?

Not to create a shared powerline backhaul with the Deco P7, P9 or PX10. According to TP-Link, the PX50 uses G.hn, while those older models use HomePlug AV. Check in the Deco app whether the connection between PX50 nodes is actually using PLC.

Can I connect a mesh router myself in the Netherlands, and does Wi-Fi require a licence?

You can choose your own router in the Netherlands, but the device must meet the applicable requirements. ACM ConsuWijzer explains the freedom to choose your router; the Dutch Inspectorate for Digital Infrastructure states that Wi-Fi on the designated frequencies is licence-exempt, with no notification or registration required. Radio equipment placed on the market must also meet the applicable European requirements and carry the CE marking.

What are my rights if the kit doesn’t work properly?

For an online consumer purchase, you generally have a statutory cooling-off period of up to 14 days after delivery, with some exceptions, according to ACM ConsuWijzer. Separately, the statutory guarantee applies if the product doesn’t perform as you could reasonably expect under normal use. There is no fixed two-year statutory guarantee period in the Netherlands that applies to every router.