Who is this guide for?

Students working behind thick walls

You share an internet connection, but your study area is behind internal walls that can interfere with the Wi-Fi signal. The connection between the mesh points is therefore an important first consideration. The Consumers’ Association (Consumentenbond) explains that walls and other obstacles can affect the signal.

Housemates who are online at the same time

You want to work from several study areas at once, so you’re looking at coverage, network capacity and connections for wired devices. The Consumers’ Association points out that Wi-Fi 6 only benefits devices that support it.

People without an Ethernet cable

You can’t run a cable to your study area, so you need to consider whether a wirelessly connected node or a powerline solution will work in your home. TP-Link describes the Deco PX10 as a system that can use Wi-Fi and your electrical wiring to connect its nodes.

What should you look for?

Mesh with Ethernet backhaul

Choose this if: you can run an Ethernet cable between the router or main mesh node and a study area.

Bear in mind: you’ll need to run cables and keep suitable Ethernet ports free.

Wireless connection between mesh points

Choose this if: running cables isn’t practical and you can place extra nodes where they still have a good connection to the network.

Bear in mind: traffic between the nodes will also need to travel wirelessly past or through obstacles.

Mesh with powerline backhaul

Consider this if: running an Ethernet cable isn’t practical and wireless nodes can’t establish a usable connection with one another.

Bear in mind: you’ll need to assess how well it works over your home’s electrical wiring.

Start by working out which connection between the nodes is practical. Then decide how many connections, nodes and management features you actually need.

Priority What to look for when buying Who is this important for?
Connection behind thick walls Check whether the system supports Ethernet backhaul and where you can place the nodes. If they connect wirelessly, test the signal in your study area. If I study behind thick walls, I first want to know whether the mesh nodes can connect to each other properly in those locations. Around 36% of consumers make coverage through or beyond walls their top buying priority.
Studying at the same time Check which devices support Wi-Fi 6 and how many Ethernet ports will be free for wired devices. If my housemates are online in different areas at the same time, I want to know whether the system and our devices are suited to that use. Around 29% of consumers prioritise simultaneous use.
Installation without running a new Ethernet cable Check whether wireless placement is possible or whether the model uses powerline, and assess the connection in your study areas. If I can’t run a cable, I want to be able to try a setup that works with the available sockets and placement options. Around 21% of consumers prioritise installation without a new Ethernet cable.
Cost and management Check how many nodes are included and whether any management features you want require a subscription. If I’m weighing up features and the number of nodes, I want to know in advance which management options may involve ongoing costs. Around 14% of consumers put cost and management first.

Common buying mistakes

  • Assuming the advertised coverage area guarantees a signal in your study area

    Walls, other obstacles, devices and network traffic can all affect real-world coverage and throughput. A large advertised coverage area alone doesn’t tell you how well the connection will work behind a particular wall.

    Check the connection where you actually study. If you have thick walls, pay particular attention to the connection between the mesh nodes.

  • Assuming an extra wireless node will fix a weak connection

    A wireless mesh node needs to receive a strong enough signal from the rest of the network. An extra node with a poor connection could therefore be an unnecessary purchase.

    First choose a practical way to connect the nodes, then decide how many you need.

  • Assuming all management features are included

    A mention of parental controls doesn’t tell you which features are available without a subscription. According to TP-Link, some advanced HomeShield features require a subscription.

    Check which features you want to use on the model you’ve chosen, and what subscription terms apply.

Brands and relevant product ranges

TP-Link

The Deco range offers different ways to connect mesh nodes, depending on the model you choose.

  • TP-Link lists optional Ethernet backhaul for the Deco X50. According to the manufacturer, the X50-PoE offers PoE and mounting options, while the PX10 combines Wi-Fi with powerline.
  • The manufacturer says coverage and throughput can vary depending on factors such as building materials and network traffic. Some advanced HomeShield features require a subscription.

FRITZ!

According to FRITZ!, the Mesh Set 1600 is designed to work with an existing router or fibre-optic modem.

  • The manufacturer describes connecting it via LAN to a router or fibre-optic modem, and using it with a FRITZ!Box.
  • For your chosen setup, check which connection you’ll use between the nodes or for a wired study device. The manufacturer’s coverage claims can’t predict the signal in your home.

ASUS

The ZenWiFi XT9 is a tri-band Wi-Fi 6 option with multiple radios and connections to consider when comparing systems.

  • ASUS’s specifications for the Netherlands list two 5GHz bands, one 2.5G WAN port and three Gigabit LAN ports.
  • ASUS says coverage and throughput depend partly on building materials, and that 160MHz bandwidth may be restricted in some regions. These specifications don’t guarantee coverage behind a particular wall.

NETGEAR

NETGEAR offers Orbi systems, including Wi-Fi 7 models, to suit a range of networking needs.

  • The manufacturer offers a range of mesh Wi-Fi systems in different configurations.
  • The range alone doesn’t show that you need a more extensive system to study together in the evenings. Compare the connections and features of the specific system with what you need at home.

Joybuy products for multiple study areas

These mesh systems are designed to spread Wi-Fi across several areas of your home. Check the connections, number of nodes and features of each model to find the right fit for your setup.

TP-Link Deco X20 AX1800 mesh Wi-Fi system, 2-pack

TP-Link Deco X20 AX1800 mesh Wi-Fi system (2-pack)

An option to compare if you’re looking for a mesh system with Ethernet backhaul for several study areas.

The product details list Deco X20 nodes, Wi-Fi 6 and Ethernet backhaul. Check the connections you need and the exact model before buying.

View at Joybuy
TP-Link Deco X50 mesh Wi-Fi system (3-pack)

TP-Link Deco X50 mesh Wi-Fi system (3-pack)

An option if you want to compare a three-node system with the option of Ethernet backhaul.

The product details list Wi-Fi 6 and three Gigabit ports per node. TP-Link says the Deco X50 supports optional Ethernet backhaul.

View at Joybuy
TP-Link Deco XE75 Pro mesh Wi-Fi system (3-pack)

TP-Link Deco XE75 Pro mesh Wi-Fi system (3-pack)

An option to compare if you need several mesh nodes and connections for wired devices.

The product details list Wi-Fi 6E, tri-band and three Ethernet ports per node. Check that your devices and preferred connections are compatible with the model you choose.

View at Joybuy
TP-Link Deco X50-PoE mesh Wi-Fi system (3-pack)

TP-Link Deco X50-PoE mesh Wi-Fi system (3-pack)

An option if you’re comparing three-node systems and PoE installation would suit your setup.

The product details list Wi-Fi 6, PoE and two Ethernet ports per node. Check that the mounting and connection options suit your installation.

View at Joybuy
TP-Link Deco X50 mesh Wi-Fi system (2-pack)

TP-Link Deco X50 mesh Wi-Fi system (2-pack)

An option to compare if you’re looking for a two-node system with optional Ethernet backhaul.

The product details list Wi-Fi 6 and three Gigabit ports per node. TP-Link lists Ethernet backhaul as an option for the Deco X50.

View at Joybuy

Frequently asked questions

Should I place mesh nodes on either side of a thick wall?

Not necessarily. A wirelessly connected node needs a usable connection to the rest of the network. Try a suitable location and check the signal in your study area. If you can run a cable, compare this with a model that supports Ethernet backhaul.

Can I check whether I need mesh Wi-Fi first?

Yes. Compare the connection in your study areas with a wired test, and try moving your existing router. The Consumers’ Association says distance, walls and a router in a utility cupboard can all limit the Wi-Fi signal. A mesh system won’t automatically improve a slow incoming connection.

Do I need a subscription for advanced parental controls on Deco?

Some HomeShield features require one, including certain schedules and advanced filters on compatible models. Check the features and software version of the model you’ve chosen before signing up.

What should I check to make sure mesh Wi-Fi complies with regulations?

Check the specific hardware and software version of the model. According to the Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur), radio equipment placed on the market in the Netherlands must meet the applicable European requirements and carry a CE mark. Since 1 August 2025, applicable digital security requirements under RED 3.3 have also been in force.