Viewer with an ethernet cable
You watch the lecture in a room behind a thick wall and can connect a mesh node by cable in that room or closer to it. TP-Link and ASUS describe wired connections between mesh nodes as one possible setup.
First, decide how the mesh nodes will connect to each other: ethernet can route the connection around a thick wall, while powerline mesh is an alternative if running cables isn’t practical. Fully wireless mesh is mainly an option when the nodes can still get a good wireless signal from each other in their chosen locations. Then check how the system connects to your modem and test the connection where you’ll be watching the live lecture. A higher advertised Wi-Fi speed isn’t the only factor.
You watch the lecture in a room behind a thick wall and can connect a mesh node by cable in that room or closer to it. TP-Link and ASUS describe wired connections between mesh nodes as one possible setup.
You want to improve the connection beyond the wall without running an ethernet cable through your home. Powerline mesh can provide a connection via your mains wiring, but how well it works also depends on your electrical installation.
Your existing Wi-Fi doesn’t reach the viewing area well enough, and you want to find out whether a suitable number of nodes, with minimal installation, can improve the connection there.
Choose this when: you can run an ethernet cable between the main unit and a node near the room where you watch the lecture.
Bear in mind: you’ll need to install or conceal the cable, and the connection between the node and your laptop may still be wireless.
Choose this when: running a cable isn’t practical and the nodes can communicate through suitable sockets on the same electrical circuit.
Bear in mind: the actual connection depends, among other things, on your electrical installation and interference.
Choose this when: you can position the nodes where they still have a good wireless connection to each other.
Bear in mind: easy placement won’t automatically fix a weak wireless connection between nodes separated by thick walls.
Don’t just compare the speed on the box. Also consider the route between the mesh nodes, how the system connects to your modem and the connection in the room where you watch the lecture.
| What to consider | What to look for | Who is this important for? |
|---|---|---|
| Connection beyond the wall | Check whether ethernet backhaul is possible. If not, test powerline using the sockets you plan to use and assess the connection while it’s in use. | If I want to avoid interruptions during a live lecture, I first check how the nodes connect to each other. Around 36% of consumers say that a reliable connection through thick walls is their main concern when buying. |
| Placement and modem | Check where the nodes can go, which ports are available and whether router or access point mode will work with your existing modem. | If I want to know whether the system will work with my modem and the available locations, I check the connections and installation options. For around 29% of consumers, placement and network connections are their main buying concern. |
| Overall setup | Compare the number of nodes in the set with the rooms you want to cover, and allow for any cabling or extra nodes you may need. | If I want to understand what the complete setup involves before I buy, I compare the system and the installation required. Around 21% of consumers are mainly concerned about the total cost of the solution. |
| Simultaneous use | Consider what your own devices can do and compare measurements in different locations, rather than relying only on advertised maximum speeds. | If other devices are using my home network during a lecture, I want to know whether the connection will still be reliable where I’m watching. Around 14% of consumers are mainly concerned about simultaneous use when buying. |
An advertised Wi-Fi speed doesn’t tell you on its own how good the connection will be where you’re watching. The route between the nodes and where you place them also matter.
First decide how the nodes will communicate with each other, then assess the connection where you’ll be watching the live lecture.
Depending on the setup, you may still need an extra node or a wired connection.
According to TP-Link, the Deco PX50’s powerline backhaul does not work with the Deco PX10, P9 or P7 models listed.
Before expanding your setup, check the exact model and whether its powerline function is compatible with the other nodes.
An extra node that doesn’t support the backhaul you need may mean you’ll have to buy a different set.
According to devolo, factors including electrical interference and the quality of your installation can affect data transfer over powerline.
Test the sockets you plan to use and assess the connection where you’ll be watching during a live session.
The Deco X50 and PX50 offer different mesh setups: ethernet backhaul or G.hn powerline.
The ZenWiFi BD4 is worth comparing if you need ethernet backhaul and configuration options. Wi-Fi 7 alone won’t solve problems caused by thick walls.
Magic 2 WiFi 6 next combines Wi-Fi nodes with a connection via your mains wiring, making it worth considering if you can’t run a cable.
Joybuy’s selection of mesh Wi-Fi products for watching a live lecture in a room behind thick internal walls.
No image available
An option if you want to connect the mesh nodes by cable; the product description also mentions wireless backhaul.
Tri-band Wi-Fi 7. Per node: one 10 Gbps port, one 2.5 Gbps port and one 1 Gbps port.
No image available
A mesh set for anyone looking to place two nodes; check that the chosen locations will provide coverage in the room where you watch.
Tri-band Wi-Fi 7 with support for the 2.4, 5 and 6GHz bands.
No image available
An option to compare if you want to use ethernet backhaul between the mesh nodes.
Wi-Fi 7 (802.11be) and two 2.5GbE ports.
No image available
A two-node set to compare if you want to use ethernet backhaul between the mesh units.
Wi-Fi 6 and ethernet backhaul.
No image available
A three-node set to compare if you want to reach several areas of your home.
Tri-band Wi-Fi 6E with 2.4, 5 and 6GHz bands. Three gigabit ports per node.
Not necessarily. Place it where it can get a usable connection both to the main unit and to your laptop. With ethernet backhaul, you can position the node closer to where you’re watching without relying on a Wi-Fi connection through the wall between the nodes.
Not for powerline backhaul with the PX10, P9 or P7: TP-Link says these models aren’t compatible for that purpose. Before expanding your setup, check the feature you need and the exact model, not just the mesh family name.
Test the sockets you plan to use and the connection where you’ll be watching. According to devolo, distance, electrical interference and the quality of your electrical installation can all affect actual performance.
According to ACM ConsuWijzer, consumers who buy online generally have a statutory 14-day cooling-off period after delivery, with some exceptions. Your statutory guarantee is separate from any manufacturer’s warranty; if a product is faulty, you can contact the retailer.
According to the Dutch Authority for Digital Infrastructure, ordinary use of Wi-Fi frequencies in the Netherlands is licence-free and does not require notification or registration, provided the conditions of use are met. Radio equipment placed on the market in the Netherlands must also meet the applicable European requirements and carry a CE mark. This does not confirm that an individual item for sale has been inspected.