Who is this relevant for?

Watching TV behind thick walls

Your TV is in a room where the existing Wi-Fi signal is weak. In that case, the connection between mesh nodes may matter more than the high speed quoted on the box.

Watching without a network cable

You can’t run an Ethernet cable to your cinema room and want to see whether Powerline will work with your electrical wiring, or whether you can position the nodes wirelessly.

A household with multiple users

You want to keep other devices connected while you’re watching and are looking for a suitable system, without automatically opting for the latest Wi-Fi generation.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Connection between mesh nodes Check whether Ethernet, suitable Powerline or wireless backhaul will work in your home with the system you’ve chosen. If my TV is behind thick walls, I want to know how the nodes connect to each other. Around 36% of consumers say this connection is their top priority.
Uninterrupted playback Test the connection by your TV and compare it with the requirements of your streaming service. Netflix recommends a stable connection of at least 15 Mbps for one 4K UHD stream; this isn’t a universal requirement for every stream. If a film keeps buffering, I want to find out first whether the problem is with Wi-Fi or my internet connection. Around 29% of consumers prioritise uninterrupted playback.
Placement and modem Check the installation instructions for router or access point mode, and see which cables or wall sockets are available. If I want to keep using my existing modem, I need an installation that works with it and a place where the nodes can still reach each other reliably. Around 21% of consumers prioritise placement and connection to their existing modem.
Total cost and support Compare systems with the same number of nodes, check which version you’re choosing, and review the terms for updates and warranty. If I’m mainly concerned about the total cost, I want to avoid paying for features that won’t solve my streaming problem. Around 14% of consumers prioritise cost and support.

Common pitfalls

  • Treating the stated coverage area as a guarantee of signal

    Walls, building materials and device placement all affect the wireless connection. A node in the cinema room won’t help much if its connection back to the main unit is weak.

    First, work out how the nodes can connect to each other, then check reception in the cinema room after installation.

    If the connection is poor in that spot, you may need to try a different position, add another node or use cabling.

  • Assuming all Deco models share the same Powerline connection

    According to TP-Link, the G.hn Powerline backhaul on the Deco PX50 doesn’t share that connection with the Deco PX10, P7 or P9, or with standalone Powerline adapters.

    Before expanding your system, check the full model names and supported backhaul options. For Powerline, TP-Link recommends plugging the nodes directly into wall sockets.

    An incompatible extra node may mean you need a different type of connection.

  • Choosing a newer Wi-Fi generation to fix a slow internet connection

    Mesh can improve your home network, but it won’t make a slow or unstable internet connection faster. The Consumentenbond notes that Wi-Fi 7 isn’t automatically the better choice for the average user.

    First, test the connection by your TV and check your internet connection before choosing another mesh system.

Brands to compare

TP-Link

The range includes the Deco PX50 with G.hn Powerline, as well as Deco models with Ethernet backhaul. The right choice depends on the exact model and how the nodes connect to each other.

  • According to TP-Link, the PX50’s Powerline option can reduce the effect of walls on the connection between nodes.
  • Powerline backhaul requires suitable PX50 units on the same electrical circuit. It won’t work with the Deco PX10, P7 or P9 as a single Powerline connection.

ASUS

According to ASUS, the ZenWiFi AX XT8 has tri-band Wi-Fi, a configurable second 5GHz band for wireless backhaul, and support for Ethernet backhaul.

  • The extra band gives you an option for connecting nodes if you’re not using a cable.
  • ASUS’s stated coverage doesn’t guarantee that the signal will remain strong enough through the walls in your home.

devolo

devolo describes Magic Powerline as combining data transmission over electrical wiring with Wi-Fi at the receiving point.

  • Powerline uses a different route from a wireless connection through the wall.
  • Performance depends on your electrical wiring; this approach doesn’t prove that every home will get the same speed or stability.

FRITZ!

According to the manufacturer, the FRITZ!Mesh Set 1700 is a two-node system that can be used with a FRITZ!Box or behind another router.

  • FRITZ! covers Wi-Fi and LAN connections in its installation instructions.
  • According to FRITZ!, when used behind a router from another brand, the system creates its own mesh network. Don’t assume it will automatically join the existing mesh network from that brand.

NETGEAR

NETGEAR describes the Orbi 870 as a tri-band Wi-Fi 7 system with a wired backhaul option.

  • NETGEAR lists a 2.5G option for wired backhaul on the Orbi 870.
  • NETGEAR’s stated maximum speeds and coverage don’t prove that you need this system for a single film stream behind thick walls.

Mesh Wi-Fi products at Joybuy

These Joybuy picks are mesh Wi-Fi systems for use in several areas of your home. For each model, check which connections between nodes are possible and whether they suit your walls, connections and modem.

TP-Link Deco E4 3-pack, dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

May be worth considering if you want to place several mesh nodes around your home and need wired connections at a node.

3-pack; dual-band 2.4 GHz and 5 GHz; Wi-Fi 5 (802.11ac); two Ethernet ports per unit, with a stated maximum speed of 100 Mbps.

View at Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7, white

ASUS ZenWiFi BD4, dual-band Wi-Fi 7

One to consider if you can connect the mesh nodes by cable and are looking for Wi-Fi 7.

Dual-band 2.4 GHz and 5 GHz; Wi-Fi 7 (802.11be); wired backhaul listed as a connection option.

View at Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

Could suit you if you’re considering a three-node system with Ethernet ports on each unit.

3-pack; dual-band 2.4 GHz and 5 GHz; Wi-Fi 6 (802.11ax); three Gigabit Ethernet ports per unit.

View at Joybuy
Linksys Velop Pro 7 tri-band Wi-Fi 7

Linksys Velop Pro 7, tri-band Wi-Fi 7

One to consider if you’re looking for tri-band Wi-Fi and wired connection options for your mesh network.

Tri-band 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 7 (802.11be); Ethernet ports listed.

View at Joybuy
TP-Link Deco XE75 Pro 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

May be worth considering if you want to compare a three-node system with multiple Wi-Fi bands.

3-pack; tri-band 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 6E (802.11ax); Ethernet ports per unit.

View at Joybuy

Frequently asked questions

Should I buy a faster mesh system if my film keeps buffering?

Not before checking the speed by your TV and the speed of your internet connection. Netflix recommends a stable connection of at least 15 Mbps for 4K UHD; a weak connection between mesh nodes and a slow internet connection need different solutions.

Can I connect a Deco PX50 behind my existing modem?

According to TP-Link’s connection instructions, you can use it in router or access point mode, but the cabling differs between modes. First choose the setting you want, then follow the corresponding layout in the manual.

How do I use Powerline nodes at home?

For Powerline Deco, TP-Link recommends plugging the nodes directly into wall sockets rather than extension leads. The connection also depends on your electrical wiring, so check that the backhaul is working after installation.

What rules apply to Wi-Fi equipment sold in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, radio equipment placed on the market in the Netherlands must meet the applicable European requirements. When a product conforms, the manufacturer affixes the CE marking; check that the marking and model are appropriate for the product you choose.

What are my rights if I buy online and the system isn’t suitable?

When you buy online from a business, you generally have a 14-day cooling-off period, subject to legal exceptions. This is separate from your rights if a product is faulty; according to the Dutch Government, the retailer is responsible for dealing with this.