Hobbyist with thick walls
You want coverage at the back of your home and are first checking whether a wireless node would still get a usable connection there. TP-Link Netherlands points out that thick walls can weaken the Wi-Fi signal.
If you can run an Ethernet cable to your hobby room, choose a mesh system with Ethernet backhaul. That way, the connection between the mesh nodes won’t have to pass through the thick walls. If you can’t run a cable, try placing a wireless node somewhere with good reception, or consider powerline backhaul if the wireless connection isn’t strong enough. Test the latter option in your home. Before buying, check the ports, the exact model variant and the applicable CE marking.
You want coverage at the back of your home and are first checking whether a wireless node would still get a usable connection there. TP-Link Netherlands points out that thick walls can weaken the Wi-Fi signal.
You can run an Ethernet cable and want to connect a mesh node in your hobby room by cable. ASUS Netherlands describes Ethernet backhaul for compatible AiMesh and ZenWiFi setups.
You can’t run an Ethernet cable and are looking into powerline if wireless mesh doesn’t provide a strong enough connection. TP-Link describes how the Deco PX50 connects mesh nodes through your home’s electrical wiring.
Choose this option: if you can run an Ethernet cable to or near your hobby room.
The trade-off: the connection between mesh nodes won’t have to travel wirelessly through thick walls, but you’ll need cables, compatible ports and the right settings. For the wired AiMesh setups it describes, ASUS recommends CAT5e or higher.
Choose this option: if you don’t want to run a cable and have a suitable spot where the signal is still usable.
The trade-off: you avoid running cables, but the mesh nodes still rely on a wireless signal. Don’t automatically put the intermediate node in the room with the weakest reception.
Choose this option: if running a cable isn’t practical and the connection between wireless mesh nodes isn’t strong enough.
The trade-off: TP-Link describes the Deco PX50 as connecting through your home’s electrical wiring. You’ll need to test how well it works and how fast it is in your home.
The Consumers’ Association advises against automatically placing a Wi-Fi extender at the back of your home when reception is weak. Instead, try a spot closer to the middle of the house first. Then check the connection where you use your hobby equipment.
| What to consider | What should you check? | Who is this most important for? |
|---|---|---|
| Wireless coverage and placement | Choose an intermediate spot where the node still gets a good connection to the network, then check the connection in your hobby room. | If I don’t want to run a cable, an intermediate node still needs to stay connected behind the thick walls. Around 36% of consumers are mainly looking for a usable wireless setup. |
| Wired connection | Check that both mesh nodes support Ethernet backhaul and how many ports will be left for your devices. | If I can run a cable to my hobby room, I want to connect the mesh nodes by cable and still have ports available for my equipment. Around 29% of consumers prioritise a wired connection. |
| Connection without a cable route | Check that the model you choose specifically supports powerline backhaul, and test the connection at home. | Without a cable route, I want an alternative if the wireless connection between nodes isn’t strong enough. Around 21% of consumers are mainly looking to solve this problem. |
| Management and ongoing costs | Check how many nodes you’ll need, what extra connections or equipment the setup requires, and what it means to leave your equipment switched on. | If I’m considering extra nodes or running cables, I want to know in advance what installation and power consumption will involve. Around 14% of consumers are mainly looking for simplicity and manageable costs. |
Walls and placement affect coverage, so a stated area won’t tell you how the connection will perform in your home.
First, map out the route between the mesh nodes and test the connection where you use your hobby equipment.
If the connection is too weak behind the walls, you may need extra nodes or cabling.
The stated G.hn speed for the Deco PX50 is a product specification, not a measurement of the connection in your home.
Consider powerline mainly if running a cable isn’t practical, and assess how well it works in your own home.
Ports used to connect mesh nodes aren’t available at the same time for other wired devices.
Before buying, count the ports you’ll need at both ends of the setup.
Depending on how many connections you need, you may require an extra switch or a different version of the kit.
The Deco models reviewed offer different ways to connect mesh nodes; the model variant determines which option you get.
The ZenWiFi XD5 is worth considering if you can use Ethernet backhaul.
The Orbi 370 is a useful point of reference if you need the wired backhaul option described.
These mesh kits are for anyone looking to place several nodes around their home. For each model, check that the listed Ethernet ports are suitable for the backhaul you want. The RDI states that radio equipment sold in Europe must meet the applicable requirements and carry a CE marking. Check this for the exact model variant.
Image unavailable
A good fit for a setup with several mesh nodes and the option to connect them by cable.
The product description lists wired and wireless backhaul, as well as 10 Gbps, 2.5 Gbps and 1 Gbps WAN/LAN ports per unit.
Image unavailable
A three-node kit for anyone looking to connect several areas of their home.
Wi-Fi 5 (802.11ac), dual-band 2.4 GHz/5 GHz. The Ethernet ports support speeds of up to 100 Mbps per unit, so bear this in mind if you need a faster wired connection.
Image unavailable
A good fit for a setup with two mesh nodes that can be connected using Ethernet backhaul.
The product description lists Wi-Fi 6 and connections between units via Ethernet backhaul or wirelessly.
Image unavailable
Worth considering if you’re looking for three mesh nodes that can be connected by cable.
Wi-Fi 6 (802.11ax), dual-band 2.4 GHz/5 GHz, optional Ethernet backhaul and three Gigabit ports per unit.
Image unavailable
A two-unit mesh kit for anyone looking to use Wi-Fi 7 with compatible devices.
Wi-Fi 7 (802.11be), tri-band 2.4 GHz/5 GHz/6 GHz. The product description lists Ethernet ports, including 10-Gigabit connections.
Not necessarily. TP-Link explains how to connect Deco to an existing router via Ethernet. Check the router or access point setting for the kit you choose; a mesh kit doesn’t provide an internet connection by itself.
First, choose an intermediate spot where the nodes still get a good connection, rather than placing one in the room with the weakest reception. Then check the connection in your hobby room.
Not until you’ve checked whether the problem lies with your internet connection or your home Wi-Fi. The Consumers’ Association recommends running a speed test on a computer connected by cable to help distinguish between the two.
For online consumer purchases covered by the cooling-off period, ACM ConsuWijzer says you generally have up to 14 days after delivery. Check the applicable exceptions and returns policy. You’re also covered by the statutory guarantee if a product doesn’t perform as you could reasonably expect under normal use.
According to the Dutch Authority for Digital Infrastructure, radio equipment sold in Europe must meet the applicable requirements and carry a CE marking. Check this for the exact model variant; a listing in an online shop alone doesn’t confirm that the specific device meets all applicable requirements.