Who is mesh Wi-Fi suitable for?

People with rooms behind thick walls

Your main priority is a usable connection in a room where Wi-Fi is currently weak. The quality of the connection between mesh points is a factor when choosing between a wireless extension and Ethernet backhaul. TP-Link and FRITZ! explain the connection options available with their systems.

Households unable to run network cables

You want Wi-Fi in several rooms, but need to connect the mesh points wirelessly. In that case, it’s important to position them where they can receive a strong enough signal from each other. The Consumers’ Association and FRITZ! highlight the importance of positioning and the connection between points.

People who want to keep their provider’s router

You want to continue using your existing internet equipment. Check which connections and operating modes the mesh system supports. FRITZ! provides instructions for setting up its system behind an existing router, while ACM ConsuWijzer explains that you can choose your own router.

What should you look for when choosing?

First, decide how the mesh points will connect to each other. Then consider where to position them, how they’ll connect to your existing router and which features your devices can actually use.

Factor to consider What should you check? Who is this important for?
Connection through thick walls Check for Ethernet backhaul support and the available ports. Test the connection where you plan to position the point. If I want to reach a room behind a thick wall, a reliable connection to that room is my top priority. Around 36% of consumers say this is their main concern when buying.
Positioning without a cable Work out where a point can reach both the room with poor coverage and the next mesh point. Check whether you can expand the system later. If I can’t run a cable between the points, I want to position them where they can still reach each other reliably. Around 29% of consumers give wireless positioning their highest priority.
Existing provider’s router Check the connection, access point mode and the features available in that mode for the exact system you’re considering. If I want to keep my provider’s router, I want to add mesh without replacing all my internet equipment straight away. Around 21% of consumers prioritise keeping their existing router.
Use by several people in the household Compare the ports, Wi-Fi version and supported devices once you’ve assessed the positioning and connection between points. If several people are online at the same time, I want to know which network features their devices can use. Around 14% of consumers give capacity for simultaneous use their highest priority.

Common pitfalls

  • Assuming the stated coverage is guaranteed in every room

    A product’s stated range doesn’t show how the connection will perform in your home. The position of wireless points and the connection between them also matter.

    Identify the rooms with poor coverage and check the connection where you plan to position the mesh points.

    If your chosen positions aren’t enough, you may need an extra mesh point or a cable.

  • Choosing a newer Wi-Fi version without considering backhaul

    A newer Wi-Fi standard won’t automatically fix a weak connection between mesh points or a poor choice of position.

    First, consider whether you can connect the points by cable and where they need to go. Then compare the Wi-Fi features with the devices in your home.

  • Assuming the same model name always means the same version

    The Consumers’ Association notes that tested Deco models can have different hardware versions, including differences in software and support.

    Compare the full model name, pack size and hardware version with the version you’re planning to buy.

Brands to compare

TP-Link

Deco is available in versions with different numbers of points, ports and Wi-Fi versions.

  • TP-Link explains Ethernet backhaul, which allows compatible Deco units to be connected by cable.
  • The Consumers’ Association warns that hardware versions with the same model name can differ in software and support. Check the exact version; product specifications can’t predict the coverage in your home.

FRITZ!

The FRITZ!Mesh Set 4200 is worth comparing if you want to use mesh behind an existing router or FRITZ!Box.

  • FRITZ! provides instructions for setting up its system behind an existing router and connecting repeaters to a FRITZ!Box via Wi-Fi or LAN.
  • The right set-up depends on your main device. With a wireless connection, the quality of the connection between points still matters.

ASUS

AiMesh and ZenWiFi systems are worth considering if you’re looking at a wired set-up and configurable network options.

  • ASUS explains Ethernet backhaul using a switch and outlines router and access point set-ups.
  • The guidance applies to supported AiMesh or ZenWiFi devices. Check that the exact model suits your preferred configuration.

NETGEAR

Orbi is available in sets with different numbers of points and configurations.

  • There are different versions to compare based on the connection between mesh points.
  • Claimed coverage and speed are product specifications, not independent measurements in a terraced house with thick internal walls. Check what the exact set can do.

Joybuy products

These Joybuy products are mesh Wi-Fi systems to compare for a two- or three-point set-up. Check that the connection between the points and the exact product specifications suit your needs.

TP-Link Deco BE68, 2-pack

TP-Link Deco BE68, 2-pack

A two-point set to compare if you want Wi-Fi in several rooms. Check which connection between the points suits your home and preferred positioning.

Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

A two-point set to consider if you’re looking for a two-point set-up. Check that it supports your preferred wired or wireless connection between the points.

The product name specifies Wi-Fi 6 and AX1800.

Joybuy
TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

A three-point set to compare if you want to assess several possible positions. Check whether three points suit the rooms with poor coverage and how they connect to each other.

The product name specifies dual-band, 2.4 GHz and 5 GHz, Wi-Fi 6 and 802.11ax.

Joybuy
TP-Link Deco X50-PoE, 3-pack, dual-band Wi-Fi 6, 2 Ethernet ports

TP-Link Deco X50-PoE, 3-pack

A three-point set to compare if you want to cover several areas of your home. Check whether the cabling and positioning you need are possible with the exact version.

The product name specifies PoE, dual-band, 2.4 GHz and 5 GHz, Wi-Fi 6, 802.11ax and 2 Ethernet ports.

Joybuy
TP-Link Deco X50, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50, 2-pack, dual-band Wi-Fi 6

A two-point set to compare if you want to assess two possible positions first. Check the connection you need between the points and how the set connects to your existing router.

The product name specifies dual-band, 2.4 GHz and 5 GHz, and Wi-Fi 6.

Joybuy

Frequently asked questions

Do I need to buy three mesh points straight away?

Not necessarily. Choose the number of points to suit the rooms with poor Wi-Fi and the quality of the connection between the points. Also check whether you can add a compatible point later.

Where should I position a wireless mesh point?

Don’t position it somewhere the connection to the previous point is already weak. After installation, check both the signal in the room with poor coverage and the connection between the points. For a FRITZ! set-up, FRITZ! explains how to check this using the app.

Can I keep my provider’s router?

You can with systems designed to connect behind an existing router, but the connection method and available features vary between sets. TP-Link explains the access point mode for Deco, while FRITZ! provides instructions for setting up its system behind a router from another manufacturer. Check the manual for the exact version.

What costs and rights should I consider after buying online?

If you’re planning a wired set-up, factor in the cost of cables and any installation work, and remember that equipment left on all the time uses energy. ACM ConsuWijzer says that online purchases generally come with a 14-day cooling-off period after delivery. You’re also covered by the statutory guarantee if a product doesn’t perform as you could reasonably expect under normal use.

What rules apply to mesh devices sold in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, radio equipment sold in the Netherlands must meet the applicable requirements and carry a CE mark. Check this for the exact version you’re buying; a general product listing doesn’t confirm it for every individual item.