If you can run a network cable, connect your mesh nodes by cable: TP-Link says that data travels between Deco units more reliably and quickly over Ethernet than over Wi-Fi. If you can’t run a cable, consider powerline backhaul, although performance also depends on your home’s electrical wiring. With wireless mesh, each node still needs to receive a strong enough signal. Check the connection where you plan to work before relying on the coverage or speed.
Who is this advice for?
Team working in separate rooms
If thick internal walls weaken the signal, first check whether the mesh nodes can connect to each other via a network cable, the electrical wiring or a reliable wireless connection. TP-Link and the Consumers’ Association point out that the connection between the nodes and any obstacles affect where you should place them.
Group using lots of devices at once
If laptops and phones are being used at the same time, look beyond coverage and consider the connection between the mesh nodes and the available ports. The Consumers’ Association highlights speed, features and energy consumption as separate factors to consider when choosing Wi-Fi extenders.
Homeowner with an existing broadband router
If you want to extend your Wi-Fi without making your home network unnecessarily complicated, check how the mesh system connects to your router and whether access point mode suits your setup. TP-Link describes different ways to connect Deco; check the instructions for the exact model.
What should you look for?
Ethernet backhaul
A good fit if: you already have a network cable or can run one to your workspace.
Bear in mind: the cables need to connect the right mesh nodes. Also check how the system connects to your router.
Powerline backhaul
A good fit if: running a cable isn’t practical and the wireless connection struggles to get through the walls.
Bear in mind: sockets and electrical appliances can affect data transfer.
Wireless mesh
A good fit if: you can place the nodes where they can still receive a strong enough signal from each other.
Bear in mind: an extra Wi-Fi band or a stated coverage area doesn’t guarantee a connection through thick walls.
| What to consider |
What should you check? |
Who does this matter to? |
| Coverage through walls |
Check whether the nodes can connect via Ethernet, powerline or a reliable wireless connection. Assess the signal in the rooms where you’ll actually use it. |
If I work in a room behind thick walls, I want to know whether the connection between the nodes will remain strong enough there. This is the top buying priority for around 33% of consumers. |
| Several people using the network at once |
Compare the Wi-Fi generation, backhaul and number of Ethernet ports. Don’t treat stated top speeds as measured performance at your workspace. |
If several laptops and phones are being used at once, I look at both the capacity of the connection and the link between the mesh nodes. Simultaneous use is the top priority for around 27% of consumers. |
| Connecting to your router |
Check where your router, cables and sockets are, and read the instructions for router or access point mode. |
If I want to keep using my broadband router, I look for a connection method that suits my network setup. Easy integration is the top buying priority for around 20% of consumers. |
| Management and running costs |
Check the security settings, firmware updates and guest network, and consider the power consumption of all nodes that stay switched on. |
If people bring their own devices, I want to be able to manage access and updates, while also taking the power consumption of the whole setup into account. This is a top priority for around 20% of consumers. |
Common pitfalls
-
Placing an extra node where there’s no usable Wi-Fi
A wireless mesh node needs its own working connection to the network. If the signal has already dropped out, the node can’t restore the connection by itself.
Place the node where it can still receive a strong enough signal, or check whether Ethernet or powerline backhaul is an option.
If the connection is too weak where you planned to put the node, you may need to move it, use a different type of backhaul or add another node.
-
Assuming the stated speed is guaranteed at your desk
Real-world performance depends on your home, and with powerline, the electrical environment also plays a part. So the maximum speed on the box won’t tell you what you’ll get at your workspace.
Check the connection where your group will be working, and don’t base your choice on the stated maximum speed alone.
-
Confusing PoE with standard Ethernet backhaul
PoE can carry both data and power over Ethernet, but it requires a compatible power supply. For the Deco X50-PoE, TP-Link lists IEEE 802.3at and 802.3bt as supported, but not 802.3af. The manufacturer also lists a DC adapter as an alternative.
Check the required power standard and the connections on the exact version before choosing a switch, injector or adapter.
You may need a compatible PoE switch or injector if you don’t already have one.
Brands to compare
TP-Link
The Deco range offers several ways to connect mesh nodes, including Ethernet backhaul, powerline and models with PoE.
- TP-Link describes the X50 as supporting optional Ethernet backhaul and the PX50 as using G.hn powerline.
- For the X50-PoE, check the supported power standard and version: TP-Link does not list support for IEEE 802.3af.
devolo
The Magic 2 WiFi 6 next combines mesh Wi-Fi with data transfer over your electrical wiring.
- devolo describes the starter kit as two adapters: one for the router and one Wi-Fi adapter for another room.
- devolo warns that certain sockets and electrical appliances can affect powerline performance.
ASUS
The ZenWiFi AX (XT8) is a tri-band Wi-Fi 6 mesh system to compare if wireless placement, connections or access point mode matter to you.
- ASUS lists router and access point modes for the XT8.
- The stated coverage doesn’t tell you how well the connection will work through the walls in your home. ASUS also notes regional restrictions on 160 MHz at 5 GHz.
FRITZ!
The FRITZ!Repeater 3000 AX is particularly relevant if you want to extend an existing FRITZ! mesh network.
- FRITZ! says this model can connect to a FRITZ!Box via LAN and has two gigabit LAN ports.
- If you have a different router, check which features of the FRITZ! mesh setup will remain available.
NETGEAR
The Orbi 970 Series is a quad-band Wi-Fi 7 option to compare if you’re weighing up the connections and placement for your home.
- NETGEAR lists quad-band Wi-Fi 7, Enhanced Dedicated Backhaul and 10-gigabit wired connectivity for this series.
- Those specifications alone don’t determine how well the connection will work through the walls in your home.
Mesh products on Joybuy
This Joybuy selection includes mesh systems with Ethernet backhaul and a wireless tri-band option. Check which connection method and placement are right for your home.
No image available
ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7 (802.11be), White
An option to consider if you can connect the mesh nodes by cable; the product description mentions wired backhaul.
The product name lists Wi-Fi 7 (802.11be) and the 2.4 GHz and 5 GHz frequency bands.
Joybuy
No image available
TP-Link AX1800 Whole Home Mesh Wi-Fi 6, 2-pack
An option if you can connect the mesh nodes with a network cable; the product description mentions Ethernet backhaul.
The product name lists Wi-Fi 6 and a 2-pack. The product description says it supports more than 150 devices.
Joybuy
No image available
TP-Link Deco X50 Dual-Band Wi-Fi 6, 3-pack
An option to consider if you want to connect the mesh nodes by cable; the product description mentions optional Ethernet backhaul.
The product name lists Wi-Fi 6 and a 3-pack. The product description says each unit has three gigabit Ethernet ports.
Joybuy
No image available
TP-Link Deco XE75 Pro Tri-Band Wi-Fi 6E, 3-pack
A wireless tri-band option to consider if you can place the mesh nodes where they’ll receive a strong enough signal from each other.
The product name lists Wi-Fi 6E and the 2.4 GHz, 5 GHz and 6 GHz bands. The product description mentions three gigabit Ethernet ports per unit, guest access and QoS.
Joybuy
No image available
TP-Link Deco X50-PoE Dual-Band Wi-Fi 6, 3-pack
An option to consider if you want to carry both power and data over Ethernet; the product description mentions PoE support.
The product name lists Wi-Fi 6 and a 3-pack. TP-Link lists IEEE 802.3at and 802.3bt as supported PoE standards, but not 802.3af. Check that you have a compatible power supply.
Joybuy
Frequently asked questions
Do I need a licence to use standard home Wi-Fi in the Netherlands?
No. According to the Dutch Authority for Digital Infrastructure, you don’t need to notify or register your use of Wi-Fi on designated licence-exempt frequencies, as long as you follow the conditions of use. This doesn’t give you permission to use arbitrary frequencies or equipment without the correct CE marking.
Where should I place an extra wirelessly connected Wi-Fi node?
Don’t automatically put the node in the room where coverage is poor: it still needs to receive a usable signal itself. The Consumers’ Association recommends keeping obstacles between nodes to a minimum and suggests placing a node halfway between them if the signal is weak at the far end. Check the connection indicator in the spot you’ve chosen.
Can I connect a mesh system to my existing router?
That depends on the model and the mode you choose. TP-Link describes different wired connection methods for Deco in router and access point modes. Check the manual for the exact system and your router setup before connecting the cables.
What maintenance and running costs should I consider?
Keep the firmware and security settings up to date, and consider setting up a guest network for visitors. Also factor in the power consumption of all nodes that are in continuous use; the Consumers’ Association assesses energy consumption separately from speed and coverage.
Is a CE claim on a retailer’s website enough to check compliance?
No. The Dutch Authority for Digital Infrastructure says the correct CE marking must be on the device itself. Check the product you actually receive: a listing on a retailer’s website doesn’t confirm that the marking is there.