Who is mesh Wi-Fi suitable for?

Studying behind thick walls

The Wi-Fi in your study is noticeably weaker than near the router. You want to find out whether moving the router or using a wired connection to a mesh point would help.

Household without a cable route

You can’t run an Ethernet cable to your study. In that case, you’ll need to position wireless mesh points where they can still communicate reliably with one another.

Using a router supplied by your provider

You want to extend your Wi-Fi coverage while continuing to use your existing router. Check which features are available when the mesh system is in access point mode.

What should you consider when choosing?

Mesh with Ethernet backhaul

Suitable if: you can run an Ethernet cable to a mesh point near your study.

Trade-off: running a cable takes effort, but the connection between the points won’t have to pass wirelessly through the walls.

Fully wireless mesh

Suitable if: you can’t run cables and can place the points where they can still communicate reliably with one another.

Trade-off: the connection between the points remains vulnerable to walls and other obstacles.

Adjust your existing network first

Suitable if: you’re not yet sure whether poor Wi-Fi in your study is the problem, or whether you could move the router.

Trade-off: moving the router could save you from buying anything, but it won’t always help if the router can’t be moved or the walls still block the signal.

Start by identifying the weak link: the internet connection itself, the Wi-Fi signal in your study or the connection between mesh points. The Consumentenbond points out that walls and ceilings can interfere with Wi-Fi and recommends placing mesh points with as few obstacles as possible between them.

What to consider What to look for Who it matters to
Coverage in your study Compare the Wi-Fi near the router with the signal in your study, and work out where the next point would still get good reception. If I need a reliable connection at my desk while studying, I want to know where the signal gets weaker. Around 36% of consumers prioritise coverage in their study.
Connection between points Check whether Ethernet backhaul is possible. If not, see whether the planned positions will provide sufficient wireless coverage. If my study is behind thick walls, I want to avoid placing a mesh point somewhere it can barely connect. Around 29% of consumers give the connection between points top priority.
Compatibility with your router Check whether the exact model has an access point mode and which features remain available in that mode. If I want to keep using my provider’s router, I want to know which network functions it will continue to manage. Around 21% of consumers prioritise compatibility with their existing router.
Number of units and connections Compare the number of mesh points and the Ethernet ports available on the exact version. If I don’t want to buy extra points or features I won’t use, I want to choose a set that suits my home and any available cable route. Around 14% of consumers focus mainly on the total purchase cost.

Common mistakes

  • Assuming advertised coverage guarantees a signal behind thick walls

    Walls and ceilings can interfere with Wi-Fi. An advertised coverage area doesn’t automatically tell you how strong the signal will be in your study.

    Check the connection near the router and in your study. Then work out where a mesh point could still maintain a usable connection with the previous point.

  • Putting a wireless point in the middle of a dead zone

    A mesh point needs a usable connection to another point. If there’s barely any signal where you place it, it won’t be able to restore the connection to the rest of the network by itself.

    Position the points with as few obstacles as possible between them. Consider Ethernet backhaul if walls are interfering with the wireless connection between points.

  • Assuming access point mode retains all app features

    According to TP-Link, some advanced features in the Deco app aren’t available in access point mode.

    Before buying, check which features you need and whether the exact model supports them in the mode you’ve chosen.

Brands to consider

TP-Link

According to TP-Link, the Deco X50 range offers a Wi-Fi 6 mesh option with wireless connectivity or optional Ethernet backhaul.

  • TP-Link lists three gigabit ports on each Deco X50 unit.
  • The advertised coverage area doesn’t guarantee a signal through the walls in your home. Some advanced app features may not be available in access point mode; check the exact set configuration too.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh option to compare if you’re considering Ethernet backhaul and management through the ASUS Router app.

  • ASUS describes Ethernet backhaul for homes with network sockets in the walls.
  • Claims about speed and coverage don’t guarantee a good connection in your study. Check the exact set configuration.

FRITZ!

According to the Consumentenbond, the Mesh Set 1600 3-pack is a Wi-Fi 6 option to compare if you’re looking for a set with three mesh points.

  • The Consumentenbond lists a guest network for this version.
  • The same product listing mentions one Ethernet port. Bear this in mind if you want to connect both a link between points and a wired device in the same place.

Netgear

The Orbi RBE373 3-pack is a Wi-Fi 7 alternative to compare if you’re specifically considering this generation of Wi-Fi.

  • The Consumentenbond lists two Ethernet ports and a guest network for this version.
  • According to the Consumentenbond, this version doesn’t include parental controls. A newer Wi-Fi version doesn’t, by itself, guarantee better coverage through thick walls.

Joybuy products for mesh Wi-Fi

This selection includes mesh systems for a study with limited Wi-Fi coverage, including options that let you compare wired backhaul, Powerline or multiple mesh points. Before buying, check the details of the exact version and make sure the device carries the required CE marking.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

A good option to consider if you’re looking for a mesh set with two points and want to compare wired backhaul.

Configuration: 2-pack.

Joybuy
TP-Link Deco PX10 dual-band Wi-Fi 6

TP-Link Deco PX10

An option to compare if you want to consider using Powerline over your home’s electrical wiring as part of your network.

The product name specifies dual-band (2,4 GHz / 5 GHz) and Wi-Fi 6 (802.11ax).

Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

Worth comparing if you’re looking for a mesh set with two points and Ethernet backhaul.

The product name specifies AX1800, Wi-Fi 6 and a 2-pack.

Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack

An option to compare if you want to consider three mesh points and the possibility of using Ethernet backhaul.

The product name specifies dual-band (2,4 GHz / 5 GHz) and Wi-Fi 6 (802.11ax).

Joybuy
Linksys Velop Pro 7 tri-band Wi-Fi 7

Linksys Velop Pro 7

Worth comparing if you’re considering a mesh system with multiple points and Wi-Fi 7.

The product name specifies tri-band (2,4 GHz / 5 GHz / 6 GHz) and Wi-Fi 7 (802.11be).

Joybuy

Frequently asked questions

Should I buy mesh Wi-Fi if only my study portal is slow?

Not straight away. First, compare the connection using an Ethernet cable near the router with the experience in your study. If the wired connection is slow too, investigate your internet connection before buying mesh Wi-Fi.

Where should I put a wireless mesh point?

Don’t put it somewhere the previous point can barely reach. The Consumentenbond recommends keeping obstacles between the points to a minimum. If the signal is weak at the far end of your home, placing a point closer to the centre may help.

Can a Deco set work alongside my existing router?

According to TP-Link, Deco can operate in router mode or access point mode. In access point mode, your existing router manages the network functions, but some advanced features in the Deco app aren’t available. Check the details for the exact model and firmware.

What can I do if a mesh set breaks too soon during normal use?

In the Netherlands, the seller must provide an appropriate free solution if the product doesn’t meet what you could reasonably expect. ACM ConsuWijzer explains that a manufacturer’s warranty doesn’t replace your statutory rights.

What rules apply to mesh Wi-Fi on the Dutch market?

Radio equipment must meet the relevant European requirements under the Radio Equipment Directive and carry the CE marking. The Dutch Authority for Digital Infrastructure explains these requirements. When buying, check the marking on the exact version.