Who should consider this?

Listener in a room with poor reception

Wants to download audiobooks reliably behind thick internal walls and can’t easily use an ethernet cable. It’s important that an extra node still has a usable connection to the network; otherwise, powerline is something to test in your home.

Resident with an ethernet cable

Can position a wired Wi-Fi node closer to where they listen and doesn’t want the connection between nodes to rely on a wireless signal passing through walls.

Careful problem-solver

Wants to check first whether the broadband connection or router position is causing the problem before buying any equipment.

What should you look for when buying?

Move the router or improve Wi-Fi

When: if a wired speed test at the router is disappointing, or if moving it to a more central position demonstrably improves reception.

Trade-off: this could save you from buying anything, but it won’t always solve poor reception in a particular room, and moving the router may require extra cabling.

Wireless mesh

When: if you can position an extra node where it still gets a good signal from the main node, with as few obstacles as possible in between.

Trade-off: no cable is needed, but a node placed behind the same thick walls may also get a weak signal. The Consumers' Association recommends positioning nodes so that there are as few obstacles as possible between them.

Mesh with ethernet backhaul

When: if there’s a usable ethernet cable running to or beyond the hard-to-reach room, or one can be installed.

Trade-off: the nodes then connect via cable, but installation takes work and the right connection varies depending on the system and operating mode.

Mesh with powerline backhaul

When: if installing ethernet isn’t practical and you can test the connection through your home’s electrical wiring using the sockets you plan to use.

Trade-off: this option avoids a wireless signal passing through walls, but electrical appliances and sockets can affect data transfer. Devolo describes this potential interference; you’ll need to assess the results at home.

Buying concern What to look for Who is this more important to?
Coverage without installing a new cable Work out where a node could go before the biggest obstacles; test powerline using the sockets you intend to use. If I can’t run an ethernet cable, I want to know whether a node placed part-way along the route will still get a good signal. Around 36% of consumers prioritise coverage without a new cable.
Connection between mesh nodes Check whether a cable route is available and whether the system supports the ethernet connection you need. If you’re happy to install cabling to make the connection less dependent on a signal passing through walls, wired backhaul is the main thing to consider. Around 29% of consumers prioritise a reliable connection.
Cause of the slow download Compare a wired speed test at the router with reception where you listen; also try moving the router. I want to know whether the broadband connection or Wi-Fi is the problem before buying mesh. Around 21% of consumers prioritise identifying the cause.
Installation and compatibility Check the connection instructions for your modem and the product information for the version sold in the Netherlands. For consumers who want a system that works with their existing network, installation and product compatibility matter most; around 14% prioritise these.

Common pitfalls

  • Assuming the highest Wi-Fi speed is the download speed you’ll get in the room

    Your fixed broadband connection, obstacles and the link between mesh nodes may matter more than the model’s advertised speed. That speed isn’t a measurement of performance in your home.

    First, run a wired speed test at the router, then check reception where you listen. The Consumers' Association recommends connecting a computer to the router with an ethernet cable for a speed test.

  • Putting a wireless mesh node behind all the thick walls

    The extra node may receive a weak signal there itself, leaving it without a usable connection to the rest of your network.

    Try a spot part-way along the route, with as few obstacles as possible. If there’s no good position for a wireless node, consider ethernet or test powerline using the sockets you plan to use.

  • Assuming powerline is a guaranteed substitute for ethernet

    Devolo warns that electrical appliances can interfere with data transfer over the mains. The results also depend on your sockets and home wiring.

    Test the connection in the places where you plan to use the adapters before relying on this option.

    If the test results are disappointing, you may need extra time to try another connection option.

Brands to consider

TP-Link

The Deco range includes mesh systems with a wireless connection between nodes, as well as models with optional ethernet backhaul.

  • TP-Link lists the Deco X50 as a 2-pack, with three Gigabit ports per unit.
  • The manufacturer suggests the PX50 as an option for walls or floors that interfere with Wi-Fi; this doesn’t prove that it will work well in a particular home.

ASUS

ZenWiFi AX (XT8) is a tri-band mesh option that can be used wirelessly or, where cabling is available, with ethernet backhaul.

  • ASUS describes a band for backhaul and a wired configuration.
  • A manufacturer’s speed specifications aren’t a measurement of audiobook download performance behind thick walls.

devolo

Magic 2 WiFi 6 next combines mesh Wi-Fi with a connection over your home’s electrical wiring.

  • devolo describes a starter kit with two adapters for a powerline setup.
  • According to the manufacturer, electrical appliances can interfere with data transfer, so test the sockets you plan to use.

NETGEAR

Orbi is a mesh product range worth comparing if you want to use multiple nodes.

  • The range includes mesh systems with multiple nodes.
  • A stated whole-home coverage area doesn’t, by itself, tell you how a model will perform behind thick internal walls.

Joybuy products

This Joybuy selection includes mesh kits for anyone looking to use one or more extra nodes. Choose wired backhaul only if you have a usable cable route; check which connections each product explicitly supports.

TP-Link Deco BE68, 2-pack

TP-Link Deco BE68, 2-pack

A good fit if you want to connect two mesh nodes via ethernet where walls make a wireless connection difficult.

TP-Link describes a mesh kit with two nodes, MLO and support for wired and wireless backhaul. Check that the connections on this version will work with your existing network.

Joybuy
ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7, white

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7, white

Could be suitable if you’re looking for a mesh setup with wired backhaul for a room behind thick walls.

The product information lists Wi-Fi 7, MLO and two 2.5 Gbit/s Ethernet ports. Check that the band configuration and compatibility suit your existing network.

Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

A good fit if you’re looking for a mesh kit with two nodes and a wired connection between them.

The product information lists Ethernet backhaul and two Deco X20 units. Before buying, check that the model designation for this version matches what you’re looking for.

Joybuy
TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E

Could be suitable if you’re considering a mesh setup with three nodes for multiple rooms.

The product name specifies tri-band Wi-Fi 6E, and the product information lists three units. Check which backhaul options and connections are available on this version.

Joybuy
TP-Link Deco X50, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50, 2-pack, dual-band Wi-Fi 6

A good fit if you want to position two mesh nodes and have an ethernet cable available for backhaul.

TP-Link lists optional ethernet backhaul and three Gigabit ports per unit. Check where you can position the nodes and whether the cable route is suitable.

Joybuy

Frequently asked questions

Will mesh help if my audiobook is slow to download even when I’m right next to the router?

Not necessarily. First, test your broadband connection using a computer connected by ethernet; if the results are consistently poor, look into your connection with your provider. The Consumers' Association recommends a wired speed test to assess your fixed connection separately.

Where should I put a wireless mesh node?

Don’t automatically put it in the room with the worst reception. Try a spot part-way along the route, with as few obstacles as possible between the nodes, and check the connection there.

Can I use my own router instead of the one supplied by my provider?

In the Netherlands, you’re free to choose your router, but your own device must meet the applicable requirements. Ask your provider about the exact connection and settings; using a mesh kit as an access point is different from replacing the provider’s equipment. ACM ConsuWijzer explains the conditions for choosing your own router.

Do I need a licence or registration for ordinary home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, you can use designated licence-exempt frequencies without a licence or registration, as long as you meet the conditions of use. This doesn’t mean that every version of a device is automatically suitable for the Dutch market.

What if a kit I bought online doesn’t work well in my home?

For online consumer purchases, you generally have a statutory 14-day cooling-off period after delivery, although exceptions may apply. Your statutory guarantee is separate from any manufacturer’s warranty: if a product is faulty, contact the seller. ACM ConsuWijzer explains these consumer rights.