Choose Ethernet backhaul if you can run a cable to the room where you take your lesson. This avoids relying on a wireless connection between mesh points through the thick wall. If cabling isn’t an option, check whether powerline mesh works in your home, or position wireless points where they can maintain a strong connection with each other. Test the connection during a lesson from the place where you take it: the RDI points out that 5GHz Wi-Fi has a shorter range than 2.4GHz.
Who is mesh Wi-Fi for thick walls suitable for?
Lesson-taker with an Ethernet cable
You take lessons in a room behind thick walls and can connect a mesh point there via Ethernet. A wired connection between the points matters more to you than a cable-free installation. TP-Link and ASUS describe Ethernet backhaul as an option for the models mentioned.
Lesson-taker without a cable route
You can’t run an Ethernet cable to the room where you take your lessons and want to check whether powerline mesh works through your home’s electrical wiring. TP-Link describes G.hn powerline for the Deco PX50; check which models you need and whether the connection works in your home.
Lesson-taker who wants to move wireless points
You want to install your system without cables and can move the mesh points around to test the connection in the room where you take your lessons. Bear in mind that walls can affect the wireless connection between the points.
What should you look for in mesh Wi-Fi for a language lesson?
Ethernet backhaul
Choose this when: you can run an Ethernet cable between the main point and a point near the room where you take your lessons.
Bear in mind: the cable route and the Ethernet ports available; cabling may require installation work.
Powerline mesh
Choose this when: running an Ethernet cable isn’t practical and you want to try connecting through your electrical wiring.
Bear in mind: the connection needs to work in your home. For the Deco PX50, TP-Link specifies at least two PX50 units on the same electrical circuit and a compatible PX50 as the main point.
Wireless mesh backhaul
Choose this when: you don’t want to run cables and can position the mesh points so they maintain a strong connection with each other.
Bear in mind: thick walls can also weaken the connection between the points. Test the connection from the place where you take your lessons and move a point if needed.
| What to consider |
What to check before buying |
Who is this important for? |
| Wired connection between points |
Check for Ethernet backhaul, the cable route and the number of Ethernet ports on the set you choose. |
If I can run a cable to the room where I take my lessons, I want the mesh points to be connected to each other by cable rather than just via Wi-Fi. Around 36% of consumers say a reliable wired connection is their top priority. |
| Powerline without a cable route |
Check the powerline standard, which units are required and whether the app shows a connection after installation. |
If running an Ethernet cable isn’t possible, I want to find out whether my home’s electrical wiring can connect the points. Around 29% of consumers say powerline as an alternative to cabling is their top priority. |
| Positioning wireless points |
Check whether the points can be moved and test the connection between them from the room where you take your lessons. |
If I want to install the system without cables, I want to be able to move the points and check the connection from the place where I use it. Around 21% of consumers say wireless positioning is their top priority. |
| Connecting to your existing router |
Check the supported network setup, any access point mode and the features of your current router. |
If I want to keep my existing network equipment, I want to know whether the new system will work with it before choosing a complete set. Around 14% of consumers say keeping their existing router is their top priority. |
Buying pitfalls with mesh Wi-Fi behind thick walls
-
Treating a stated coverage area as a guarantee
Your home’s Wi-Fi range depends in part on the walls and where you position the points. Consumentenbond describes Wi-Fi tests carried out in different locations and at different distances, so a stated coverage area alone can’t predict performance in the room where you take your lessons.
First compare the possible connections between the points, then test from the place where you take your lessons. Don’t buy based solely on square metres or a combined theoretical Wi-Fi speed.
-
Assuming all Deco models share the same powerline connection
According to TP-Link, the Deco PX50 does not form a powerline backhaul with the PX10, P7 or P9 because they use different standards.
Check the full model names of all the units and, after installation, use the Deco app to see whether the powerline connection is active.
You may need another or an additional compatible mesh unit.
-
Guessing the number of units or ports from unclear product information
Choosing the wrong pack could mean you don’t get the connections or the number of points you expected.
Before buying, check the exact model and what’s included in the pack against the manufacturer’s product specifications and the seller’s information.
With the wrong set, you may still need another or an additional unit.
Brands and product ranges to consider
TP-Link
According to TP-Link, the Deco X50 offers wireless or Ethernet backhaul. The Deco PX50 adds G.hn powerline as an option for homes where running cables is difficult.
- TP-Link lists three gigabit ports per Deco X50 unit and optional Ethernet backhaul.
- For the PX50 powerline connection, the units used must support the stated standard; TP-Link says it doesn’t offer powerline backhaul with the Deco PX10, P7 or P9.
ASUS
The ZenWiFi XD5 is a mesh set to consider if you’re looking at Ethernet backhaul and configurable Wi-Fi network names.
- ASUS describes Ethernet backhaul for homes with Ethernet ports in the walls.
- The manufacturer’s stated speed benefits apply under specific device and regional conditions; check the connection in your home.
FRITZ!
The FRITZ!Repeater 1200 AX is worth considering if you want to extend an existing FRITZ!Box network.
- FRITZ! lists a gigabit LAN connection and a LAN connection to a FRITZ!Box for FRITZ! Mesh.
- If you have a different router, don’t assume the same FRITZ! Mesh integration is available without checking.
NETGEAR
The Orbi range is worth comparing if you’re also considering mesh sets with different Wi-Fi and band configurations.
- NETGEAR offers a range of Orbi sets and lists streaming as a use case.
- Check the configuration of the specific model and test the connection behind the walls in your home.
Joybuy products for mesh Wi-Fi
This selection includes mesh products with wired or wireless backhaul options, as well as sets with multiple points. For each model, check how many units are included and which connections between the points are supported.
No image available
TP-Link Deco BE68 (2-pack)
The product description lists wired and wireless backhaul, so you can consider a wired connection between points if there’s a cable route to the room where you take your lessons.
Wi-Fi 7; 2 units; the product description mentions Multi-Link Operation and multi-gigabit ports.
Joybuy
No image available
Linksys Velop Pro 7 Tri-Band (2 nodes)
The product details list two nodes and the option to expand the system with compatible Linksys mesh devices if you want to position several points around your home.
Wi-Fi 7 (802.11be); tri-band: 2,4GHz, 5GHz and 6GHz. The product description lists streaming as a use case.
Joybuy
No image available
TP-Link Deco XE75 Pro (3-pack)
With three units, this set is designed for anyone looking to position several mesh points. Check that the connection between them remains usable from the room where you take your lessons.
Tri-band Wi-Fi 6E (2,4GHz, 5GHz and 6GHz); three Ethernet ports per unit.
Joybuy
No image available
TP-Link Deco XE75 (3-pack)
The product description lists three units for a mesh setup with multiple points; test the connection between them from the room where you take your lessons.
Tri-band Wi-Fi 6E (2,4GHz, 5GHz and 6GHz); three Ethernet ports per unit.
Joybuy
No image available
ASUS ZenWiFi BD4 Dual-Band
This listing includes one node. You’ll need additional compatible ASUS mesh nodes to connect multiple mesh points.
Wi-Fi 7 (802.11be); the product details list wired backhaul options and expansion with other ASUS mesh systems.
Joybuy
Frequently asked questions about mesh Wi-Fi behind thick walls
Where should you position a wireless mesh point?
Don’t automatically place the point beyond the last thick wall. Check whether it can maintain a usable connection to the rest of the network, and test it from the place where you take your lessons. The RDI also recommends paying attention to your router’s location and busy Wi-Fi channels.
How can you check whether a Deco PX50 is using powerline?
According to TP-Link, you can use the network map in the Deco app to see which backhaul the satellite point is using. For powerline backhaul, TP-Link specifies at least two PX50 units on the same electrical circuit and a compatible powerline Deco as the main point.
Do you need to replace your provider’s modem to use mesh Wi-Fi?
Not just to install a mesh set behind your existing router; check the installation options and whether the set you choose has an access point mode. If you want to connect your own router directly to your provider’s network, ACM ConsuWijzer explains your right to use your own router and the related security and configuration requirements.
What rules apply to Wi-Fi in the Netherlands?
According to the RDI, Wi-Fi frequencies can generally be used without a licence, provided you comply with the applicable conditions. There’s no notification or registration requirement for this licence-exempt use. Select the correct country settings and follow the instructions: incorrect settings could result in excessive transmission power and interference. The RDI also states that the equipment must carry CE marking.
What can you do if a mesh point breaks sooner than you’d expect?
Contact the seller. According to ACM ConsuWijzer, statutory consumer rights apply alongside any manufacturer’s guarantee for as long as the product should reasonably have lasted under normal use; this doesn’t simply mean a fixed two-year period for every product.