Workshop participants behind thick walls
Your main priority is a reliable connection where you work, even if the space is hard to reach. The connection between the router and the Wi-Fi node matters more than a large claimed coverage area.
First, use an Ethernet cable to check that your fixed internet connection is working properly. Then find out how the workshop space can connect to your main network. If you can run a cable, compare Ethernet backhaul with a wired access point. Without a cable, wireless mesh depends on the connection between the nodes, while powerline is an alternative that you should test using the sockets you plan to use. None of these set-ups guarantees an uninterrupted workshop on its own, as the Consumentenbond’s buying advice and guidance from ACM ConsuWijzer and manufacturers make clear.
Your main priority is a reliable connection where you work, even if the space is hard to reach. The connection between the router and the Wi-Fi node matters more than a large claimed coverage area.
You can run an Ethernet cable to or near your workspace and want to know whether Ethernet backhaul or a wired access point would suit your set-up.
You want to find out first whether dropouts are happening inside your home or are already present on your fixed internet connection.
Start by testing the internet connection with a wired device near the connection point. Then choose based on your cabling options and the connection where you’ll be attending the workshop.
Choose this option if: you can run an Ethernet cable to a mesh node near the workshop space.
Trade-off: the mesh nodes connect to each other by cable, so you’ll need suitable ports or new cabling.
Choose this option if: running a cable isn’t possible and there’s a spot where an extra node can still get a good connection to the main network.
Trade-off: thick walls and the position of each node can affect the connection between them. Adding another node won’t automatically fix a weak connection.
Choose this option if: running a cable isn’t practical and the wireless connection between mesh nodes isn’t good enough.
Trade-off: data transmission over your home’s electrical wiring can depend on the sockets you use and nearby electrical appliances.
Choose this option if: your workshop space is in a fixed location and you can use a cable there.
Trade-off: this solution requires cabling and won’t automatically provide coverage elsewhere in your home.
| What to consider | What to look for when buying | Who is this important for? |
|---|---|---|
| Connection between Wi-Fi nodes | Check where you can position the nodes and how strong the connection is in those spots. Don’t treat the stated coverage area as a guarantee for your home. | If I work behind thick walls, I want to know whether the Wi-Fi node itself can communicate properly with the main network. Around 36% of consumers say coverage behind walls is their top buying priority. |
| Wired connection | Check whether the system supports Ethernet backhaul and which ports will be left free for your devices. | I can run a cable to my fixed workshop space and want to compare a wired connection there with wireless mesh. Around 29% of consumers prioritise the option of a wired connection in that space. |
| Cause of dropouts | First, test with an Ethernet cable close to the connection point, then compare the results with those in the workshop space. | Before I buy a mesh system, I want to know whether the problem is with the fixed connection or the Wi-Fi in my home. Around 21% of consumers say diagnosing the problem is their top buying priority. |
| Compatibility and costs | Compare exactly what’s included in the set, its ports, how it works with your existing router and how it’s managed. | I want to keep using my existing equipment if needed and avoid buying a system that doesn’t suit my set-up. Around 14% of consumers prioritise compatibility and avoiding unnecessary purchase costs. |
A manufacturer’s coverage claim doesn’t show how well the signal will reach your intended workshop space.
Before you buy, work out where the router and Wi-Fi nodes can go, then test the connection in the workshop space.
An extra Wi-Fi node won’t fix a problem with the connection at your internet access point.
First, test with an Ethernet cable as close as possible to the connection point, and repeat the test at different times. ACM ConsuWijzer recommends a wired test at the connection point to check your internet speed.
The sockets you choose and your electrical appliances can affect data transmission over your home’s power network.
Test powerline adapters in the wall sockets where you plan to use them. Devolo says the connection and electrical appliances are among the factors to consider.
The Deco X50 is one option to compare for wireless placement or a set-up using Ethernet backhaul.
The FRITZ!Mesh Set 1700 is worth considering if you want to combine a mesh system with an existing router or fibre modem.
The ZenWiFi BD4 is a dual-band Wi-Fi 7 option to compare if you’re also considering wired backhaul and available ports.
Magic 2 WiFi 6 next combines powerline with mesh Wi-Fi for situations where running cables is difficult.
The mesh Wi-Fi systems below are suited to the need for a reliable connection in a fixed workshop space. Check each system’s wired backhaul options and available ports. When buying, also check that the specific product carries the required CE marking and meets the applicable RED requirements.
No image available
A mesh option to compare if you can run a cable to a Wi-Fi node.
Wi-Fi 7 (802.11be); dual-band 2.4 GHz and 5 GHz. ASUS lists options for wired backhaul.
No image available
A three-unit mesh system to compare if you want to position several nodes around your home.
Wi-Fi 6 (802.11ax); three gigabit ports per unit. TP-Link lists support for Ethernet backhaul.
No image available
A mesh option to consider if you’re comparing systems with multiple Wi-Fi nodes.
Tri-band Wi-Fi 7 (802.11be); the product information lists two nodes included.
No image available
A mesh system to compare if you want to organise power and network connections using PoE.
Wi-Fi 6 (802.11ax); supports PoE and has two Ethernet ports per unit.
No image available
A three-unit mesh system to compare if you want to position several Wi-Fi nodes around your home.
Tri-band Wi-Fi 6E; three Ethernet ports per unit.
Don’t decide based on the version number alone. First, look at the connection between the Wi-Fi nodes and where they’ll go in your home. According to the Consumentenbond’s buying advice, the Wi-Fi version alone doesn’t tell you enough about performance.
First, test your fixed internet connection using a computer connected by Ethernet close to the connection point. Then test again in the workshop space. Repeat the test at different times. If the connection is already poor at the connection point, look into the issue with your provider first. ACM ConsuWijzer recommends a wired test close to the connection point.
Plug the adapters directly into the wall sockets where you plan to use them. Devolo says extension leads and nearby electrical appliances can affect transmission. Trying a different socket may help you test the set-up, but it doesn’t guarantee an improvement.
According to the Rijksinspectie Digitale Infrastructuur, radio equipment placed on the market in the Netherlands must meet the applicable European requirements and carry the correct CE marking. Since 1 August 2025, the applicable RED requirements for digital security also apply; this doesn’t confirm that a specific product meets them. For a standard online consumer purchase, you generally have 14 days from delivery to change your mind, subject to legal exceptions. ACM ConsuWijzer also makes clear that your statutory guarantee is separate from a manufacturer’s guarantee.