Who is this advice for?

Portfolio creator working behind thick walls

You upload files from a room with weak Wi-Fi and want to know whether a wired mesh connection could improve the connection in your workspace. The Consumers’ Association of the Netherlands advises placing Wi-Fi nodes where you want to boost the signal; TP-Link describes Ethernet backhaul for the Deco X50.

Worker with no way to run a cable

You can’t run an Ethernet cable to your workspace and want to weigh up whether wireless mesh can provide a usable connection there, or whether powerline via your electrical wiring is an alternative. ASUS describes the ZenWiFi AX XT8 as a tri-band mesh option; devolo describes powerline for the Magic 2 WiFi 6 next.

Worker unsure what’s slowing uploads down

You want to check whether your internet connection itself is slow to upload before buying extra Wi-Fi nodes. The Consumers’ Association of the Netherlands recommends connecting a computer to your home network with an Ethernet cable when running a speed test.

What should you consider when choosing?

Mesh with Ethernet backhaul

When If you can run an Ethernet cable beyond the thick walls and need Wi-Fi there.

Consider You’ll need a cable route and a suitable location for each node; also check the ports and connection to your modem.

Fully wireless mesh

When If running cables isn’t practical and you can place a node somewhere it can still receive a usable wireless connection.

Consider Placement and the connection between nodes remain crucial; advertised Wi-Fi speeds don’t guarantee upload speeds in your workspace.

Mesh via powerline

When If you can’t run an Ethernet cable and the wireless connection between rooms isn’t good enough.

Consider Test the connection through the sockets in your home, and check the kit and compatibility. devolo states that Magic adapters aren’t compatible with dLAN adapters.

Consideration What should you check? Who is this important for?
Connection beyond the walls Check whether the exact model supports Ethernet backhaul and whether you can run a cable to a suitable location. If I mainly need Wi-Fi in my workspace, I want to know whether the mesh nodes can reach it via a reliable connection. Around 43% of consumers make a connection beyond the walls their main priority.
Installation without an Ethernet cable Decide where you can place the nodes or adapters, which kit you need and whether your existing adapters are compatible. If I can’t run a cable to my workspace, I want to know whether wireless mesh or powerline can provide a workable link there. Around 29% of consumers prioritise installation without running a new cable.
Cause of slow uploads Run repeated tests using a computer connected via Ethernet, then compare with the connection in your workspace. If I don’t know what’s causing my portfolio to upload slowly, I want to test my internet connection before buying mesh. Around 28% of consumers make this diagnosis their priority.

Common pitfalls

  • Buying a mesh system without testing your internet connection

    If your provider’s connection is the bottleneck, a mesh system won’t fix slow upload speeds.

    First, run repeated tests using a computer connected to your home network via Ethernet. Then compare the connection in your workspace.

  • Assuming an advertised Wi-Fi speed or coverage figure is guaranteed behind thick walls

    A product specification won’t tell you what connection the mesh nodes will actually get in your home.

    First, choose a practical route between the nodes and test the connection in the locations where you plan to use them.

  • Combining powerline adapters from different devolo product ranges

    devolo states that adapters in the Magic range aren’t supported with the dLAN range.

    Check the product range and what’s included in the kit before choosing an additional adapter.

Brands to consider

TP-Link

The Deco X50 is a mesh option for a wired or wireless setup; TP-Link lists optional Ethernet backhaul.

  • The Ethernet backhaul described could be useful if you can run a cable to a suitable location.
  • Advertised Wi-Fi and coverage figures are manufacturer claims, not measurements taken behind the walls in your home. Check the pack size and exact version.

ASUS

The ZenWiFi AX XT8 is a tri-band mesh option for a wireless connection between nodes. ASUS also lists an access point mode.

  • According to ASUS specifications, the XT8 has a 2.5G WAN port and three Gigabit LAN ports.
  • The maximum wireless speeds listed don’t guarantee upload speeds in your workspace; thick walls can still affect the connection.

devolo

The Magic 2 WiFi 6 next combines mesh Wi-Fi with a powerline connection via your electrical wiring, for rooms where running a cable is difficult.

  • The connection route via your electrical wiring could be an option if you can’t run an Ethernet cable.
  • Test the connection using the sockets where you plan to use it. devolo says Magic adapters aren’t compatible with dLAN adapters.

Mesh Wi-Fi products at Joybuy

These Joybuy product picks are mesh Wi-Fi systems for a home network. Check the pack size, connections and connectivity options for each model; for the specific device, also check that it has the correct CE marking and is the version intended for the Netherlands.

ASUS ZenWiFi BT8 mesh system, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack) tri-band Wi-Fi 7

The set includes two mesh units; check that the planned placement and connection between the nodes suit your home.

The product name lists tri-band Wi-Fi on 2.4, 5 and 6 GHz and Wi-Fi 7 (802.11be).

Joybuy
TP-Link Deco X50 mesh system, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack) dual-band Wi-Fi 6

The set includes three mesh nodes and could suit a setup where you need several nodes; TP-Link lists Ethernet backhaul for the Deco X50.

The product name lists dual-band Wi-Fi on 2.4 and 5 GHz and Wi-Fi 6 (802.11ax). Check the ports on the exact version if you want to connect devices by cable.

Joybuy
Linksys Velop Pro 7 tri-band Wi-Fi 7

Linksys Velop Pro 7 tri-band Wi-Fi 7

The product information lists two mesh nodes; check that the connection between them will be usable in the planned locations.

The product name lists tri-band Wi-Fi on 2.4, 5 and 6 GHz and Wi-Fi 7 (802.11be).

Joybuy
ASUS ZenWiFi BT10 mesh system, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT10 (2-pack) tri-band Wi-Fi 7

The set includes two mesh nodes; check their placement and the connection between them for your workspace.

The product name lists tri-band Wi-Fi on 2.4, 5 and 6 GHz and Wi-Fi 7 (802.11be).

Joybuy
TP-Link Deco XE75 Pro mesh system, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack) tri-band Wi-Fi 6E

The set includes three mesh nodes; check that the connections and route between them suit the places where you need Wi-Fi.

The product information lists tri-band Wi-Fi on 2.4, 5 and 6 GHz, Wi-Fi 6E (802.11ax) and three Gigabit Ethernet ports per unit.

Joybuy

Frequently asked questions

Can mesh make my portfolio upload faster if my internet connection itself has slow upload speeds?

No, mesh doesn’t increase the speed of your internet connection. First, test it using a computer connected via Ethernet; if the main problem is Wi-Fi in your workspace, a better-connected Wi-Fi node could help.

Where should I place a wireless mesh node?

Place the node somewhere it can still connect to the network, then test the connection in your workspace. The Consumers’ Association of the Netherlands explains that Wi-Fi node placement is decided during installation; a coverage claim can’t predict how the connection will perform in your home.

Can I extend my existing devolo dLAN adapters with Magic 2 WiFi 6 next?

No. devolo states that dLAN adapters aren’t supported in combination with the Magic range. So check the product range before choosing an additional adapter.

Do I need a licence for ordinary home Wi-Fi in the Netherlands, and what should I check on the device?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi on the designated frequencies doesn’t require a licence, notification or registration. The Authority also states that equipment must carry the correct CE marking; check that the specific device is the version intended for the Netherlands.

What should I check about the mesh system and setup before ordering?

Check how many nodes or adapters the kit includes and whether you’ll need an additional node, cable or adapter for your planned setup. Also make sure the chosen connection route and ports are suitable for your home network.