Who is this guide for?

Student with a cable route

Your study space is behind thick walls, and you can run a network cable to a Wi-Fi node in or near the room. Focus on Ethernet backhaul and whether you can connect the units as planned. Ziggo and TP-Link Netherlands describe wired connections as a way to link mesh nodes.

Student without a cable route

You can't run a network cable and want to know whether a wireless node will provide enough coverage, or whether powerline is worth investigating. The Consumers' Association recommends positioning Wi-Fi nodes with as few obstacles between them as possible; TP-Link describes powerline as a connection that uses your home's electrical wiring.

User with an existing router

You may want to keep your current home network and are looking for a suitable way to extend it. Check how the chosen system connects and which operating modes it supports. The ACM says you can choose your own router in the Netherlands, but that doesn't mean mesh features from different brands will automatically work together.

What should you look for in mesh Wi-Fi?

Ethernet backhaul

Choose this if: you can run a network cable between the main unit and a node near your study space.

Bear in mind: you'll need to plan the cable route and use the right ports; the final connection from the node to your laptop will still be wireless.

Wireless backhaul

Choose this if: you can't run a cable and there's a spot before the thick wall with a good connection to the main network.

Bear in mind: a node can't pass on the signal effectively if its own wireless connection is already weak.

Powerline backhaul

Choose this if: running a cable isn't practical and a wireless connection between the nodes looks difficult.

Bear in mind: performance depends on the electrical wiring in your home; product specifications can't predict how well it will work there.

What to consider What should you check? Who is this important for?
Connection in your study space Check for Ethernet backhaul, the ports available, and whether the cable route and connection method will work for your setup. If I can run a cable to a node near my study space, I don't want the connection between the units to depend on the thick wall. Around 36% of consumers prioritise having a cable route.
Coverage without a cable Find a spot for the wireless node with as few obstacles as possible, then test the connection where you use your study portal. If you choose powerline, also check how it works through the power sockets in your home. If I can't run a cable, I want to know whether a node elsewhere will stay well connected or whether powerline will work in my home. Around 29% of consumers prioritise coverage without a network cable.
Existing router and number of nodes Check your modem or router model, the operating mode required, and whether you need an extra node or a complete set. If I want to keep my current network, I only want to add equipment that I can connect correctly. Around 21% of consumers focus on their existing equipment and the size of their purchase.
Secure access Check which wireless encryption and firmware updates are available, then review the security settings after installation. If I use my home network for studying, I want to be able to secure and monitor access properly. Around 14% of consumers prioritise network security.

Common buying mistakes

  • Placing a wireless mesh node just behind the thick wall

    The node first needs to receive a usable connection from the previous node. A spot with fewer obstacles may therefore work better than the study space itself.

    Try different positions and assess the connection where you use your study portal. If there's no good wireless route, look into Ethernet backhaul.

    You may still need an extra node or a cable route.

  • Assuming the stated speed or coverage area reflects what you'll get in your study space

    Manufacturer specifications don't account for the walls, positioning and devices in your home, so a stated speed doesn't guarantee a usable connection through the wall.

    First choose how the mesh nodes will connect, then check your access to the portal in the place where you'll actually use it.

  • Assuming the product page confirms the exact version and all its ports

    For the Deco PX50, Joybuy lists one Ethernet port per device, while TP-Link lists three gigabit ports. Check the version and ports of the product you actually intend to buy.

    Before buying, get clear confirmation of the model, version, ports and packaging.

    An unsuitable set could mean changing your setup or needing a different version.

Relevant mesh Wi-Fi brands

TP-Link

The Deco X50 and PX50 offer different ways to connect mesh nodes. The right choice depends, among other things, on the cable route and connections in your home.

  • TP-Link describes optional Ethernet backhaul for the X50 and a powerline connection between units for the PX50.
  • These are product specifications and manufacturer claims, not an independent test of coverage in a home with thick walls. Stated speed or coverage doesn't predict the results in your study space.

FRITZ!

The FRITZ!Repeater 1200 AX may be worth considering if you're adding to an existing FRITZ! network.

  • FRITZ! says the repeater can connect to a FRITZ!Box via LAN and can also be used with other routers.
  • Automatic transfer of Wi-Fi settings is specifically described for use with a FRITZ!Box. A standalone repeater isn't a complete mesh set.

ASUS

The ZenWiFi BD4 is worth exploring if you're considering an expandable AiMesh system with a wired connection between nodes.

  • ASUS specifies two 2.5-gigabit ports for the BD4 and an option for wired backhaul.
  • Wi-Fi 7 alone doesn't prove better coverage through thick walls. Also check which regional version is being offered.

NETGEAR

Orbi is an alternative to compare if you're considering wireless backhaul or, with compatible equipment, wired backhaul.

  • NETGEAR describes Ethernet as one way to connect Orbi satellites and recommends updating the firmware before installation.
  • Check the ports and support for the specific Orbi version you're considering; features of one version don't automatically apply to the entire product range.

Joybuy product picks

These products are home mesh Wi-Fi options for different network setups. Before buying, check that the version being offered has the correct CE marking; the relevant requirements apply to radio equipment placed on the market in the Netherlands.

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

A three-node mesh set for anyone looking to place several units around the home.

Dual-band: 2.4 GHz and 5 GHz. The listed Ethernet ports have a maximum speed of 100 Mbps.

View at Joybuy
ASUS ZenWiFi BD4 dual-band mesh Wi-Fi system with Wi-Fi 7

ASUS ZenWiFi BD4, dual-band Wi-Fi 7

A mesh system to consider if you're looking at a wired connection between nodes; ASUS describes an option for wired backhaul on this model.

Wi-Fi 7 and dual-band (2.4 GHz / 5 GHz). Check which regional version is being offered before you buy.

View at Joybuy
TP-Link AX1800 mesh Wi-Fi system, Wi-Fi 6, 2-pack

TP-Link AX1800 mesh Wi-Fi system, Wi-Fi 6 (2-pack)

A two-node mesh set to consider if you want to connect the units using Ethernet backhaul.

Wi-Fi 6; the product description mentions both a wireless connection and Ethernet backhaul between the Deco units.

View at Joybuy
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

A mesh set for anyone looking to use three units and considering Ethernet backhaul.

Dual-band (2.4 GHz / 5 GHz) Wi-Fi 6. TP-Link describes both wireless connections and optional Ethernet backhaul for the X50.

View at Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600, dual-band Wi-Fi 7 mesh router

A mesh router to consider if you want to extend a network with multiple units.

Dual-band Wi-Fi 7. The product description says multiple FG736 units can work together as one network with a single SSID.

View at Joybuy

Frequently asked questions

Does the extra mesh node need to be in my study space?

Not necessarily: a wireless node needs a usable connection to the previous node. Place it with as few obstacles in between as possible; with Ethernet backhaul, you can connect a node by cable closer to your study space. Then check the connection where you use your portal.

Can I keep my existing modem or router?

That depends on how the chosen system connects and the features it offers. TP-Link describes different cable routes for Deco in router and access point modes. The ACM confirms that you can choose your own router in the Netherlands, but that doesn't mean mesh features from different brands will automatically work together.

Do I need Wi-Fi 7 to access a study portal?

First, make sure the coverage and connection between your Wi-Fi nodes are suitable for your study space. According to the Consumers' Association's buying advice, Wi-Fi 6 remains a suitable choice for most people; the Wi-Fi version alone says nothing about performance in your space.

What extra costs and warranty rights should I consider?

Before buying, ask whether your setup requires extra nodes, cable installation or optional services. In the Netherlands, the seller is responsible for the statutory guarantee if a product is faulty; there isn't simply a fixed two-year statutory guarantee period for every product.

What legal requirement applies to a Wi-Fi router sold in the Netherlands?

The relevant European requirements apply to radio equipment placed on the market in the Netherlands; compliant equipment must carry the correct CE marking. Check the marking on the version actually being offered.