Viewers with a possible cable route
You watch TV beyond a thick wall and can run an Ethernet cable to an extra Wi-Fi point or your TV. In that case, a reliable, consistent connection is the priority.
If you can run an Ethernet cable to the room where you watch TV, mesh with Ethernet backhaul is a sensible option: the connection between mesh points won’t have to travel wirelessly through the thick wall. If running a cable isn’t possible, you could try wireless mesh, placing a point where it can still receive a usable signal from your existing network. If that connection isn’t strong enough, you could test powerline networking in your home. Check your TV’s connections and the speed where you watch, rather than relying only on the advertised Wi-Fi speed.
You watch TV beyond a thick wall and can run an Ethernet cable to an extra Wi-Fi point or your TV. In that case, a reliable, consistent connection is the priority.
You want coverage in the room where you watch without running a new cable, and want to know whether a wirelessly placed point will still receive a strong enough signal there.
You want to find out whether extending your current router or using your home’s electrical wiring is a good fit, rather than replacing your entire network straight away.
First decide how the mesh points will connect to each other. Then consider where to place them, what connections you need and what your home’s layout calls for.
| What to consider | What to look for when buying | Who is this important for? |
|---|---|---|
| Stable connection beyond the wall | Check whether you can run a cable for Ethernet backhaul and whether the points and TV have the Ethernet ports you need. | If I can run a cable to the room where I watch, I want to avoid a wireless hop through the wall. Around 36% of consumers prioritise a stable wired connection. |
| Coverage without running a new Ethernet cable | Find a spot where the extra point can still receive a usable signal; you could also test powerline networking over your existing electrical wiring. | If running cables isn’t practical, I’m looking for a solution that reaches the room where I watch without a new Ethernet cable. Around 29% of consumers prioritise coverage without a cable. |
| Compatibility with your current router | Check for router or access point mode, and make sure the setup works with your current equipment and any existing mesh network. | If I want to keep my current router, I’ll check how the new equipment connects and is managed. Around 21% of consumers mainly choose based on keeping and connecting their existing equipment. |
| Buying, expanding and maintaining your setup | Check how many points and power supplies are included, what’s needed to expand the setup, and what updates and power requirements apply. | If I want to improve the connection in one room, I don’t want to buy extra points or equipment that my setup doesn’t need. Around 14% of consumers mainly consider cost, expansion and maintenance. |
A quoted maximum speed or coverage range won’t tell you how the connection between points performs behind the walls in your home.
Choose your connection method first, then check the connection and speed where you watch.
An extra point still needs to receive a usable connection from your existing network.
Place it where the signal is still usable. If that isn’t possible, consider running a cable or testing powerline networking in your home.
For the TP-Link Deco X50-PoE, TP-Link lists support for IEEE 802.3at and 802.3bt, but not 802.3af. The power supply therefore needs to be suitable for the device you choose.
Check the exact version and the power supply included. If you want to use PoE, make sure the PoE power supply you have is suitable too.
Powering the device over the network cable may require a suitable PoE switch or injector.
The Deco X50-PoE is worth considering if you also want to connect your mesh points by cable.
The ZenWiFi XT9 is worth a look if you want to compare wireless placement and access point mode.
The FRITZ!Repeater 3000 AX is particularly relevant if you’re extending an existing FRITZ! home network.
Magic 2 WiFi 6 next combines powerline connections between adapters with local mesh Wi-Fi.
Orbi is an alternative to compare if you’re considering wireless mesh with Ethernet backhaul.
These products are suited to mesh setups with Ethernet backhaul and wireless mesh for multiple rooms.
No image available
A mesh option to consider if you have a cable route between the points.
Product details list Wi-Fi 7 (802.11be), dual-band and two 2.5Gbps Ethernet ports.
The product description mentions wired backhaul; check the connections and setup required for your cable route.
No image available
A two-unit mesh setup to consider if you need an extra point and want to use Ethernet backhaul.
Product details list Wi-Fi 6 and both wireless connections and Ethernet backhaul between Deco units.
No image available
A three-unit mesh set to consider if you want to cover several rooms and have a cable route between the mesh points.
Product details list Wi-Fi 6 and three gigabit Ethernet ports per unit. TP-Link describes Ethernet backhaul between Deco units.
No image available
A wireless mesh option to compare if running cables isn’t practical and you want to cover several rooms.
Product details list Wi-Fi 6E, the 2.4, 5 and 6GHz bands, and three Ethernet ports per unit.
No image available
A mesh set to consider if you can run a cable to the points and want to use wired backhaul or PoE.
Product details list Wi-Fi 6, PoE and two Ethernet ports per unit. Check the exact version and make sure the PoE power supply you need is suitable for your setup.
Measure the speed on the device you use to watch, then compare it with a measurement taken closer to your router. Netflix recommends 5 Mbps or higher for Full HD and 15 Mbps or higher for 4K UHD on its service, with a stable connection. These figures aren’t a guarantee for other services or simultaneous use. If the speed is already lower than expected next to the router, check your internet provider’s connection too.
Don’t just put the point where reception is missing: it still needs a usable connection to your existing network. Use the setup guide and check the connection and speed where you watch after installing it.
Yes, with a mesh system that supports access point mode, such as the TP-Link Deco X50-PoE or ASUS ZenWiFi XT9 reviewed here. Follow the connection instructions for your chosen system; the exact setup depends on the router you already have.
Check how many mesh points, cables, power supplies or powerline adapters your setup needs, and what would be required to expand it. Also consider software updates and power consumption, as network points may be switched on for long periods.
Yes. According to ACM ConsuWijzer, you have the freedom to choose your router; additional technical and security requirements may apply to your own modem. A provider may refuse an insecure device and must make the necessary connection settings available. This doesn’t mean you have to replace your provider’s router to add a mesh system.