Who is this choice relevant to?

Viewers with a route for an ethernet cable

If you can connect a node on the other side of the walls using an ethernet cable, check for ethernet backhaul and how the system connects. TP-Link Netherlands explains how Deco nodes communicate with each other over ethernet.

Viewers without a route for a cable

If you’d rather not have the wireless connection between nodes pass through thick walls, consider a mesh system with built-in powerline. Check that it works with the sockets you plan to use.

Viewers who can use an intermediate spot

If you’d rather not run a cable, an extra node in an intermediate spot may help, provided it can still get a usable signal from the other node. The Consumers’ Association recommends keeping obstacles between Wi-Fi nodes to a minimum.

What should you consider when choosing?

First, work out whether there’s a route for an ethernet cable. If not, see whether powerline or an intermediate spot for wireless mesh would work in your home.

Factor to considerWhat should you check?Who is this most relevant to?
Wired connection between nodes Check ethernet backhaul, available ports and the cabling instructions for your chosen mode. TP-Link Netherlands describes different ways to connect Deco. If I can run a cable to the other side of the walls, I want the mesh nodes to communicate over it. Around 36% of consumers prioritise a reliable connection using the cabling available to them.
Powerline without an ethernet cable Check that the set actually has built-in powerline and test the connection using the sockets you plan to use. TP-Link lists G.hn powerline for the Deco PX50; the advertised speed isn’t a measurement of performance in your home. Without an ethernet cable, I want an alternative to a wireless connection through the walls. Around 29% of consumers prioritise a cable-free route that can bypass thick walls.
Wireless placement Try an intermediate spot with as few obstacles as possible. The Consumers’ Association recommends placing Wi-Fi nodes no more than two rooms apart. If I don’t want to run a cable, I want to know whether a node in an intermediate spot can still maintain a good connection to the other one. Around 21% of consumers prioritise wireless placement.
Cause of the problem and connections needed Use an ethernet cable to test the connection at the internet connection point, and count the free ports needed for the modem, mesh nodes and viewing device. Also check the instructions for router or access point mode. I want to find out whether my internet connection or current setup is causing the problem before choosing a new set. Around 14% of consumers prioritise cost and compatibility with their existing equipment.

Common buying mistakes

  • Placing an extra wireless node beyond all the thick walls

    The extra node still needs a usable connection to another mesh node. Simply putting it in the room where you’ll be watching won’t automatically fix a weak connection between nodes.

    Try an intermediate spot first. If you can’t get a usable connection there, look into ethernet or a powerline solution that you can test with the sockets you plan to use.

  • Assuming advertised Wi-Fi speed or coverage guarantees a good stream

    According to TP-Link, actual throughput and coverage can depend on factors including building materials, obstacles and connected devices.

    Test the connection between the mesh nodes and where you’ll be watching before the concert. Assess how the setup performs in your home rather than relying solely on an advertised speed.

  • Assuming Wi-Fi is the problem without testing your internet connection

    A test over Wi-Fi doesn’t show how your internet connection performs at the connection point on its own.

    Test using an ethernet cable at the connection point, preferably at several different times. If the connection is already inadequate there, look into that problem before buying mesh.

  • Not checking the number of connections for the exact model

    A plan involving wired mesh nodes and a connected viewing device also depends on how many ethernet ports are available.

    Check the number of ports on the exact model and count how many connections you’ll need in advance.

Brands to consider for this setup

TP-Link

The Deco X50 and Deco PX50 offer different options for a mesh setup behind thick walls.

  • TP-Link lists ethernet ports for the Deco X50 and G.hn powerline for the Deco PX50.
  • The X50 doesn’t have the same built-in powerline function as the PX50. Advertised speeds and range don’t guarantee coverage or stream quality in your home.

FRITZ!

The FRITZ!Repeater 3000 AX is a mesh extender to consider if you already have a FRITZ! network.

  • FRITZ! lists two gigabit LAN connections and compatibility with FRITZ!Box and FRITZ!Repeater products.
  • A repeater isn’t a replacement for a modem, and it doesn’t prove that a wireless connection will be strong enough through the walls in your home.

ASUS

AiMesh and ZenWiFi are options to consider if you want to use ethernet backhaul.

  • ASUS describes ethernet backhaul setups, including one that uses a switch.
  • Connections and features depend on the model and network mode; check the instructions for your set.

NETGEAR

The Orbi 370 series is a dual-band mesh product range with Wi-Fi 7.

  • NETGEAR describes the wireless backhaul on this series as improved.
  • That description from the manufacturer doesn’t prove that the connection will pass through the thick walls in your home effectively.

Joybuy product picks

These product picks include mesh systems with wired or wireless backhaul, as well as mesh routers for a network with multiple units. Before buying, check that the connections and connection route suit your home.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68, 2-pack

An option if you want to place two mesh nodes and can use wired backhaul.

Tri-band Wi-Fi 7; the product description lists both wired and wireless backhaul.

View at Joybuy
TP-Link AX1800 mesh Wi-Fi system, 2-pack

TP-Link AX1800 mesh Wi-Fi system, 2-pack

An option if you want to use two mesh nodes with a wired connection between the Deco units.

Wi-Fi 6; the product description lists ethernet backhaul.

View at Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

An option if you want multiple units to work together in a mesh network with a single network name.

Dual-band Wi-Fi 7; the product description lists setup and management through the HUAWEI SmartLife app.

View at Joybuy
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

An option if you want to set up a mesh network with one network name and roaming between rooms.

Dual-band Wi-Fi 6; the product description lists automatic band selection and management through the Huawei AI Life app.

View at Joybuy
Linksys Velop Pro 7 tri-band Wi-Fi 7 mesh, white

Linksys Velop Pro 7 tri-band Wi-Fi 7 mesh, white

An option if you want to use multiple mesh nodes and add extra nodes later.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz; the product description lists two included nodes and the option to add extra nodes.

View at Joybuy

Frequently asked questions

Should I test my internet connection or my Wi-Fi first?

First, test the connection using an ethernet cable close to the connection point at several different times, then compare the results with your internet contract. If the connection is repeatedly inadequate there, speak to your provider about it before buying mesh.

Where should I put a wireless mesh node for the room where I’ll be watching?

Place it in an intermediate spot where it can still get a good signal from another node, with as few obstacles as possible. The Consumers’ Association recommends placing Wi-Fi nodes no more than two rooms apart; test what works in your home.

Can I connect mesh nodes using a cable while keeping my provider’s modem?

Yes, if the system supports the wired mode you’ve chosen. TP-Link describes different ways to connect Deco in router and access point modes; follow the instructions for the mode you’re using.

Do I need a licence for Wi-Fi mesh at home in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi on designated frequencies is licence-exempt and doesn’t need to be reported or registered. Licence-exempt doesn’t mean interference-free. Radio equipment placed on the market in Europe must also comply with the applicable rules and carry a CE mark.

Who should I contact if a mesh set I’ve bought breaks down too soon?

Contact the seller. According to ACM ConsuWijzer, your statutory guarantee applies alongside any manufacturer’s warranty. What you could reasonably expect from the product and whether it has been used normally are relevant factors.