Who is this mesh option relevant for?

Student behind thick walls

You study in a room where the connection to your current router is weak. First, test the room where you’ll be studying and possible locations for Wi-Fi points; the Consumers’ Association advises placing Wi-Fi boosters where you need the signal.

Homeowner with an Ethernet cable

You can connect Wi-Fi points on either side of difficult walls using Ethernet. Check whether your chosen system supports Ethernet backhaul; TP-Link and ASUS describe this feature for certain models.

Homeowner without an Ethernet cable

You’ll need to choose between a wireless point in a location with a usable signal and a powerline mesh kit. With powerline, the connection depends on your home’s wiring; TP-Link advises plugging the points directly into wall sockets.

What factors determine your choice?

First, check whether the room where you’ll be studying can receive a good Wi-Fi signal, then decide how the points will connect to each other.

Mesh with Ethernet backhaul

Suitable when: there’s a usable Ethernet cable between the planned Wi-Fi points.

Trade-off: you’ll need cables and ports; also check the Wi-Fi connection between your study device and its point.

Fully wireless mesh

Suitable when: there’s no cabling, but you can place an additional point where it still receives a good signal from the network.

Trade-off: the additional point must maintain a usable wireless connection to the rest of the network.

Mesh with powerline backhaul

Suitable when: there’s no Ethernet and you can test a suitable powerline kit using the available sockets.

Trade-off: the connection depends on your electrical installation and whether the powerline points are compatible.

What to consider What should you look for? Who prioritises this?
Connection where you study Test the Wi-Fi where you’ll be studying and in possible locations for the points; don’t base your choice on advertised coverage alone. If I study in a room where the current Wi-Fi is weak, I want to make sure I can get a usable connection there first. Around 38% of consumers prioritise coverage where they study.
Connection between the points Check for Ethernet backhaul support if you have a cable. Without one, test the wireless connection between locations or the powerline connection and compatibility. I want to avoid a point in the study room losing its connection to the network. Around 31% of consumers prioritise the connection between Wi-Fi points.
Existing broadband router Check which router or access point modes are available and which network features remain active in the mode you choose. If I want to keep my broadband router, I want to know which device manages the network and which features will remain available. Around 23% of consumers give compatibility with their existing router top priority.
Purchase and running costs Work out how many points and any cables you’ll need, and check the power consumption for long-term use. I want to know in advance how much equipment and how many connections my setup will need. For around 8% of consumers, the purchase and ongoing running costs are their main concern.

Buying pitfalls

  • Comparing only the highest advertised Wi-Fi speed

    A product specification won’t tell you how the connection will perform where you study or between the points in your home.

    Decide in advance where you’ll be studying and where you can place the points. Then test the connection in those locations.

  • Assuming every additional wireless point will automatically help

    The additional point also needs to stay connected to the rest of the network.

    Test a suitable location between the points, or use Ethernet between them if possible.

  • Assuming powerline backhaul will work with any socket

    Your electrical installation can affect the connection. Different powerline technologies are not necessarily compatible with each other either.

    Check that the models are compatible, plug powerline points directly into suitable wall sockets, and check the connection status after installation.

  • Expecting all router features to work in access point mode

    According to TP-Link, some features are unavailable in access point mode with Deco, including parental controls and port forwarding.

    Check which features you need for your chosen model and which are available in the mode you plan to use.

Brands to consider

TP-Link

According to TP-Link, the Deco PX10 combines Wi-Fi 6 with HomePlug AV powerline between compatible Deco points.

  • Could be an alternative to a wireless connection between points when walls get in the way.
  • Performance depends on your home’s wiring; if you use the kit in access point mode, also check that it supports the router features you need.

ASUS

According to ASUS, the ZenWiFi XD5 supports Ethernet backhaul.

  • An option to consider if you can connect your Wi-Fi points using Ethernet.
  • This support doesn’t indicate how a specific kit will perform in a home with thick walls; check the exact version and what’s included in the box.

eero

eero describes systems where points can connect to each other wirelessly or via Ethernet.

  • Both connection types are worth comparing with the cabling options in your home.
  • Check the exact model, the number of points and the management features you need.

NETGEAR

For the Orbi RBK763, NETGEAR specifies a dedicated connection between the router and satellites.

  • The dedicated backhaul is a feature to consider when comparing network setups.
  • This specification doesn’t guarantee that a wireless signal will reach through thick walls in every home; check the placement and the exact kit.

Mesh systems on Joybuy

These product picks are mesh kits designed to provide Wi-Fi in several areas of your home. For each model, check how the points can connect to each other and whether that suits your walls and cabling. In the Netherlands, the Netherlands Authority for Digital Infrastructure requires equipment to carry the correct CE marking; check this on the specific device.

TP-Link Deco PX10 mesh kit

TP-Link Deco PX10 mesh kit

Worth considering if walls interfere with the wireless connection between Deco points and you don’t have Ethernet.

Dual-band Wi-Fi (2.4 GHz and 5 GHz) and Wi-Fi 6. TP-Link describes powerline connectivity between Deco units; performance depends on your electrical installation. Plug the points directly into wall sockets.

Before use, check that the specific device carries the correct CE marking.

Joybuy
TP-Link Deco X50 mesh kit, 3-pack

TP-Link Deco X50, 3-pack

Worth considering if you want Wi-Fi in several areas and can use Ethernet between the points.

3-pack; dual-band Wi-Fi (2.4 GHz and 5 GHz) and Wi-Fi 6. Ethernet backhaul is optional; the product information lists three gigabit ports per unit.

Before use, check that the specific device carries the correct CE marking.

Joybuy
Linksys Velop Pro 7 mesh kit with 2 nodes

Linksys Velop Pro 7

Worth considering if you’re looking for a mesh setup with several points; check which connection between the nodes will suit your home.

The product information lists two included nodes, tri-band Wi-Fi and Wi-Fi 7.

Before use, check that the specific device carries the correct CE marking.

Joybuy
TP-Link Deco XE75 Pro mesh kit, 3-pack

TP-Link Deco XE75 Pro, 3-pack

Worth considering if you need several Wi-Fi points; check which connections between the points are possible in your planned setup.

3-pack; tri-band Wi-Fi (2.4 GHz, 5 GHz and 6 GHz) and Wi-Fi 6E. The product information lists three Ethernet ports per unit.

Before use, check that the specific device carries the correct CE marking.

Joybuy
TP-Link Deco XE75 mesh kit, 3-pack

TP-Link Deco XE75, 3-pack

Worth considering if you’re looking for a mesh kit with several points; check how the points can connect to each other.

3-pack; tri-band Wi-Fi (2.4 GHz, 5 GHz and 6 GHz) and Wi-Fi 6E. The product information lists three Ethernet ports per unit.

Before use, check that the specific device carries the correct CE marking.

Joybuy

Frequently asked questions

Where should I put an additional Wi-Fi point for my online lessons?

Place the point where it can maintain a usable connection to the network, then check the signal in the study room. With Ethernet backhaul, the points can connect via cable; without a cable, you’ll need to test the wireless connection in your chosen location.

Can I keep using my broadband router?

Yes, if your chosen system supports a suitable access point mode. With Deco, the main router continues to assign IP addresses, among other things; according to TP-Link, some Deco router features are unavailable in this mode. Check the documentation for your chosen model and the features you need.

How can I check whether the Deco PX10 is using powerline?

TP-Link describes how to check in the Deco app using the network map: select the satellite point and view the connection type. The manufacturer advises plugging powerline points directly into wall sockets; your electrical installation can affect the connection.

What are my rights if a mesh kit I bought online is faulty?

When you buy from a business at a distance, you usually have a 14-day cooling-off period, according to the Dutch Government. You’re also entitled to a product that meets reasonable expectations under Dutch law. There’s no fixed statutory guarantee period; a manufacturer’s warranty does not replace your rights against the seller.

Do I need a licence to use Wi-Fi at home in the Netherlands?

According to the Netherlands Authority for Digital Infrastructure, you don’t need a licence to use Wi-Fi at home as long as you follow the rules for the designated frequencies and how they may be used. Equipment must also carry the correct CE marking; check this on the specific device.